Installation & Operation Guide

ManualsBrandsLifebuoy ManualsElectronicsPool Unit of Pool alarm system

23.

BCone | Installation & Operation Guide

Rev B | Doc P/N: BC-00-70-002

Make Your Pool Safer

Smart & Simpool

TROUBLESHOOTING

Mobile Alert – Indicates

an issue that cannot be

displayed on the Home Unit.

Resolution – Check the

mobile application.

Connectivity Issue –

Indicates a problem with

the connection between

the Pool Unit and the Home

Unit.

Resolution –

1. Make sure that Pool

Unit is floating vertically

in the pool (it will not

communicate otherwise)

2. Place the Home Unit

closer to the Pool Unit.

3. Verify that the Pool Unit

batteries are not drained.

Wi-Fi Connection Issue –

Indicates a Wi-Fi connection

issue.

Resolution –

1. Check that the home Wi-Fi

router is working properly.

2. Place the Home Unit

closer to the Wi-Fi router.

Low Battery Alert –

A blinking battery icon

indicates low Home Unit

battery.

Resolution – Charge

the Home Unit using the

supplied charging cable.

When the Home Unit is

charging, the battery icon is

on. When the battery icon

turns off, it indicates full

battery.

Low Pool Unit Battery

Alert – Both mobile device

icon and battery icon are

simultaneously on it indicates

low Pool Unit battery.

Resolution – See section

Replacing Pool Unit

Batteries.

NOTE: When BCone is in On mode, issues related to the Pool

Unit are also indicated by the On button LED blinking red.

CAUTION: The

Home Unit battery is

not replaceable.

HOME

SAFETY

INTRODUCTION

OPERATION

SERVICE

MULTI BCONE

GETTING STARTED

Summary of content (5 pages)

PAGE 1
HOME SAFETY INTRODUCTION GETTING STARTED OPERATION SERVICE MULTI BCONE TROUBLESHOOTING Mobile Alert – Indicates an issue that cannot be displayed on the Home Unit. Resolution – Check the mobile application. Connectivity Issue – Indicates a problem with the connection between the Pool Unit and the Home Unit. Resolution – 1. Make sure that Pool Unit is floating vertically in the pool (it will not communicate otherwise) 2. Place the Home Unit closer to the Pool Unit. 3.
PAGE 2
HOME SAFETY INTRODUCTION GETTING STARTED OPERATION SERVICE MULTI BCONE REPLACING POOL UNIT BATTERIES The Pool Unit is delivered with two Alkaline batteries already installed. When the Home Unit icons indicate low Pool Unit battery (both mobile device icon and battery icon are lit simultaneously), it is advisable to change the batteries as soon as possible.
PAGE 3
HOME SAFETY INTRODUCTION GETTING STARTED OPERATION SERVICE MULTI BCONE SHUT DOWN AND STORAGE During the off season, perform the following steps to shut down and store BCone: A Press and hold the Power button on the Home Unit. All LEDs turn off. B C D Take the Pool Unit out of the water and dry it. E If the Home Unit is charging, disconnect the charger. Disconnect the hook from the Pool Unit and from the attachment cone. Roll the attachment string. 25.
PAGE 4
HOME SAFETY INTRODUCTION GETTING STARTED OPERATION TECHNICAL SPECIFICATIONS SERVICE z MULTI BCONE QR Code for mobile application download– BCone includes the following specifications: z BCone Home Unit model – LBPABCHU01 z BCone Pool Unit model– LBPABCPU01 Alarm level of both the home and Pool Unit is 85 dB at 10 feet (complies with ASTM F-2208 standard) z Minimum and maximum ambient temperature – 32°F-113°F (0°C-45°C) z Temperature range for charging battery – 32°F-113°F (0°C-45°C) z Hom
PAGE 5
HOME SAFETY INTRODUCTION GETTING STARTED OPERATION SERVICE MULTI BCONE MULTI BCONE This chapter reviews the the option of using more than one Pool Unit, and includes: z Multi BCone Installation Recommendations z Adding a Pool Unit z Multi BCone Operation Smart & Simpool 27.