Installation & Operation Guide

29.

BCone | Installation & Operation Guide

Rev B | Doc P/N: BC-00-70-002

Make Your Pool Safer

Smart & Simpool

MULTI BCONE OPERATION

When multiple Pool Units are paired with one Home Unit, the Pool Unit must be selected before an

operation mode is set. The Select Device button alternates between the multiple Pool Units. The LEDs

indicate the Pool Unit that is currently selected.

Press the Select Device button to light the LED of the relevant Pool Unit (i.e. press once to select the first

Pool Unit, press twice to select the second Pool Unit, and so on).

After selecting a Pool Unit, one of the operation mode LEDs lights up for a few seconds to indicate the

current operation mode.

To change the Operation Mode for the selected Pool Unit, see Operation Modes.

The On button LEDs indicate

which of the Pool Units are in

On mode

The Home Unit icons

indicate current issues

related to one or more of the

Pool Units

The Swim Mode button LED

blinks if at least one of the

Pool Units is in Swim mode

HOME

SAFETY

INTRODUCTION

OPERATION

SERVICE

MULTI BCONE

GETTING STARTED

PAGE 1
HOME SAFETY INTRODUCTION GETTING STARTED OPERATION SERVICE MULTI BCONE MULTI BCONE OPERATION When multiple Pool Units are paired with one Home Unit, the Pool Unit must be selected before an operation mode is set. The Select Device button alternates between the multiple Pool Units. The LEDs indicate the Pool Unit that is currently selected. Press the Select Device button to light the LED of the relevant Pool Unit (i.e.
PAGE 2
THANK YOU! Yuvalim Business Campus, Ness Ziona, Israel info@lifebuoyalarm.com M a k e Yo u r P o o l S a f e r www.lifebuoyalarm.com Copyright © 2021-2022 Lifebuoy, all rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical or otherwise without prior written permission of Lifebuoy.