Life Fitness 10W Wireless Charger User Manual V1.1 9525 BRYN MAWR AVENUE ROSEMONT IL 60018 | 847.288. 3300 | LIFEFITNESS.
For your safety, please read this manual carefully before using and integrating this product. 1. Overview Life Fitness 10W Wireless Charger is a universal wireless charging module that can be easily integrated to the various equipment host embedded board. The equipment installed with the module allow user to simply place their mobile phone on its surface to charge wirelessly. Wireless Charging Surface LED Indicator Power Connector Regulatory Labeling Location 10W Wireless Charger User Manual V1.
2. Specification Product Name: Life Fitness 10W Wireless Charger Model No: 1011883-0001 Input: 12V/1.5A (powered via host wire cable 1014289-0001) Output Power: 10W Max Operating Frequency: 120KHz ~ 130KHz Module Dimension: 120mm (L) x 65mm (W) x 10.6mm(H) Operating Temperature: 0 ºC ~ 40 ºC 3. Installation and Integration Instruction 1. Install the wireless charger with coil facing toward the charging surface of the equipment and secure the wireless charger through the four ϕ3.
2. Plug one end of the power wire cable (P/N: 1014289-0001) to the power connector and the other end to the host embedded board. 3. The wireless charger blue LED indicator should come on for 1s when power is supplied to the module. 4. Place a mobile device that is compliant to WPC (Wireless Power Consortium) standard on the wireless charging surface to start charging automatically. 5. When the charger is in normal state and start charging, the blue LED indicator should be constantly on.
4. Precautions Do not attempt to disassemble or repair this product. It can cause electric shock and damage to the circuit. The product should be kept in dry and ventilated environment, do not store in an area of high humidity and high temperature. Do not use the wireless charger in severely hot, humid or corrosive conditions. Do not place cards equipped with a magnetic strip or chip (such as ATM and credit cards) on the charging surface when charging to avoid possible card reading failures.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and candidate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
Cet équipement est conforme Canada limites d'exposition aux radiations dans un environnement non contrôlé. Au cours de l'opération de l'appareil sur une distance de 10 cm autour de l'appareil et de 10 cm au - dessus de la surface supérieure de l'appareil doit être respecté. 10W Wireless Charger User Manual V1.