User Manual for Pearl K100 Portable Photo Printer User Manual 2 Benutzerhandbuch 19 Manuel de l'utilisateur 32 Manual de usuario 45 Manuale d'uso 58 ユーザーマニュアル 71 Please read this product manual carefully before use and keep it properly 1
Product overview Paper outlet Status indicator Power button Cassette cover Battery level indicator USB-C charging portindicator 2
Reset button Photo paper slot Tip: When the machine is halted, press the reset button with a pin to forcibly shut down. Load photo paper 1 Open printer cassette cover Firmly press the cassette cover to hear a Click sound. The cassette cover is in place.
2 Load mono paper or ZINK paper as needed a.Load mono paper Unpack the paper and place the entire pack into the printer, making sure the glossy side of the paper is upward. b.Load ZINK paper Unpack the paper and load the entire pack into the printer, making sure that the Smart Sheet is at the bottom and that the barcode is bottommost and the glossy side of the paper is upward. Note: The Smart Sheet must be placed at the bottom.
01 01 01 01 02 01 02 01 01 01 3 Close cassette cover Usage 1 Power on Press and hold the power button for 3 seconds to turn on the printer. The printer status light is on in white, then turns to orange blink, waiting for connection with the phone.
2 Connect liene photo app 1.Search "Liene Photo" in ios app store or google play, or scan the qr code below to download and install "liene photo" App. 2.Open Liene Photo app home page, click "+", or click "Switch printer" icon on the top left corner, select "+", and add devices according to the App prompt. Tip: Due to the upgrade and update of Liene Photo App, the actual operation may be slightly different from the above description, please follow the current guidelines in the App.
Instruction for buttons 3s Press and hold the power button for 3 seconds ON/OFF 7s Press and hold the power button for 7 seconds Restore factory settings Tip: In the firmware upgrade status, the upgrade will not be interrupted if you press and release or press and hold the power button.To save battery power, the printer will automatically shut down after 10 minutes or more of standby.
Status indicator Light off Power off White light on Standby Orange light blink Connect Bluetooth White light blink Printing / Firmware upgrade Orange light on Printer failure White and orange are on for 1 second respectively Restore factory settings Troubleshooting The Liene app will alert you to various error conditions through in-app messaging. Follow the app instructions to resolve issues. For additional help on specific issues with your Liene photo printer, see the FAQs on global.liene-life.
Warranty & Support Thank you for choosing Liene! We really hope you will enjoy the product! Your satisfaction means everything to us! Liene provides a 1-year warranty for this product, please contact us immediately if you encounter any of the following, and we will supply a replacement or refund. 1. Receiving defective items. 2. Short packaging. 3. Parts are broken in transit. 4. Item stops working within warranty. 5. Wrong order.
Caution & Notice 1. The printer is best used in an environment with a temperature of 20 ℃ - 25 ℃ and a relative humidity of 40% - 60%. Improper ambient temperature and humidity will affect the printing quality, resulting in paper jam and incomplete printing. 2. Do not use unofficial Mono paper, ZINK paper or the Smart Sheet of ZINK paper to ensure the printing quality. 3. Do not mix the ZINK paper and the Smart Sheet in different packs, otherwise the printing quality will be affected.
5. During printing, do not cover the paper outlet or touch the paper, as this will affect the print quality; do not forcefully pull the paper to avoid damaging the printer. 6. When storing the paper, high temperature and direct sunlight will discolor the paper; humid environment, water and other solutions will discolor and bend the paper; dust will scratch the surface of the paper and damage the machine. 7.
10. Do not place the battery in an extremely low pressure environment as this may cause the battery to explode or leak flammable liquids and gases. 11. If the battery becomes severely swollen, do not continue to use it. 12. Only batteries approved by the manufacturer are allowed. Replacement with the wrong type of battery may make the safety protection failure, and there will be explosion, fire and other risks. 13. Do not disassemble, impact, crush or cut the battery, which may cause explosion. 14.
16. Avoid direct sunlight. It is recommended that the storage temperature be 0 ℃ - 25 ℃ and the relative humidity be 40% - 55%. 17. The Smart Sheet can be used to clean the print head, please keep it in a safe place. FCC Statement The United States Federal Communications Commission (in 47 CFR 15.105) has specified that the following notice be brought to the attention of users of this product.This device complies with Part 15 of the FCC Rules.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
Caution! Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipmen. Regulatory compliance information Hereby, Hannto Technology Co., Ltd. declares that the radio equipment type ZPP110 is in compliance with Directive 2014/53/ EU. The full text of the EU declaration of conformity is available at the following internet address: https://global.liene-life. com/pages/ Service/declaration.
handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. Please contact the installer or local authorities for more information about the location as well as terms and conditions of such collection points. The operation temperature range of the battery is 5 °C~40 °C.
A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas. Tips: The illustrations of products, accessories and user interface in this Manual are indicative and for reference only. The actual product may slightly differ due to product updates and upgrades.
Pearl K100 Portable Photo Printer Product Name: Portable Photo Printer Model: ZPP110 Rated Input: 5V Battery Capacity: 500 mAh FCC ID: 2AZHDZPP110 Dimensions: 126×85×25 mm Net Weight: ~183 g Operation Temperature: 15°C~32°C 1A Wireless Connectivity: Bluetooth 5.0 Maximum Output Power: 4.5 dBm Working Frequency: 2402-2480 MHz Manufacturer: Hannto Technology Co., Ltd. Address: Room 704, Building 1, No.
Produktübersicht Ausgang Statusanzeige Power-Taste Kartondeckel Akkustandanzeige USB-CLadeanschluss 19
Taste „Reset“ Nut des Fotopapiers Hinweis: Wenn die Maschine abstürzt, drücken Sie mit dem Gegenstand wie Nadel die Taste „Reset“, um die Maschine erzwingend auszuschalten. Benutzerhandbuch 1 Kartondeckel des druckers Schieben Sie den Papierdeckel stark. Wenn Sie den Klang von „Klick“ hören, bedeutet dies, dass der Kartondeckel richtig platziert wird.
2 Schwarzweiß-fotopapier oder farbfotopapier wird nach bedarf eingelegt a.Schwarzweiß-Fotopapier einlegen Öffnen Sie die Fotopapierverpackung, legen Sie die gesamte Packung Fotopapier in den Drucker und stellen Sie sicher, dass die Glanzfläche des Fotopapiers nach oben ist. b.
01 01 01 01 02 01 02 01 01 01 3 Kartondeckel schließen Drucker verwenden 1 Anschalten Drücken Sie die Einschalttaste für 3 Sekunden, um den Drucker einzuschalten. Die Statusanzeige des Druckers leuchtet weiß, dann blinkt sie orange und wartet auf die Verbindung mit dem Telefon.
2 Liene Photo App anschließen 1.In iOS App Store oder Google Play suchen Sie nach Liene Photo, oder scannen Sie den folgenden QR-Code, um die App „Liene Photo“ herunterzuladen und zu installieren. 2.Öffnen Sie die Homepage von Liene Photo App, klicken Sie auf „+“, oder auf das Icon „Switch Printer“ in der oberen linken Ecke, wählen Sie „+“ aus, und fügen Sie das Gerät gemäß der App-Eingabeaufforderung hinzu.
Tastenbeschreibung 3s Drücken Sie die Einschalttaste für 3 Sekunden Ein-/ Ausschalten 7s Drücken Sie die Einschalttaste für 7 Sekunden Zurücksetzen auf die Werkseinstellungen Hinweis: Das Upgrade der Firmware wird derzeit durchgeführt. Wenn Sie kurz oder lang die Einschalttaste drücken, wird das Upgrade nicht unterbrochen.Wenn der Drucker im Standby-Modus länger als 10 Minuten ist, wird der Drucker zum Sparen des Batteriestroms automatisch ausgeschaltet.
Statusanzeige Licht aus Ausschalten Weißes Licht an Standby Orangefarbenes Licht blinkt Bluetooth anschließen Weißes Licht blinkt Wird gedruckt / Firmware-Upgrade Orangefarbenes Licht an Druckerausfall Weiße und orange Statusanzeige leuchtet jeweils für 1 Sekunde Zurücksetzen auf die Werkseinstellungen Fehlersuche Die Liene-App macht Sie durch In-AppBenachrichtigungen auf verschiedene Fehlerzustände aufmerksam. Folgen Sie den Anweisungen der App, um Probleme zu beheben.
Garantie & Unterstützung Vielen Dank, dass Sie sich für Liene entschieden haben! Wir hoffen sehr, dass Sie das Produkt genießen werden! Ihre Zufriedenheit bedeutet alles für uns! Liene bietet eine 1-Jahres-Garantie für dieses Produkt. Bitte kontaktieren Sie uns sofort, wenn eines der folgenden Probleme auftritt, und wir werden Ihnen einen Ersatz oder eine Rückerstattung liefern. 1. Erhalt von defekten Artikeln; 2. Mangelhafte Verpackung; 3. Teile sind während des Transports gebrochen; 4.
Vorsichtshinweise 1. Die optimale Anwendungstemperatur des Druckers ist 20 ° C bis 25 ° C. Die relative Luftfeuchtigkeit ist 40% bis 60%, und die ungeeignete Temperatur und Luftfeuchtigkeit der Umgebung wirkt sich auf die Druckqualität aus, was zu einem Papierstau und einem unvollständigen Druck führt. 2. Verwenden Sie kein unoffizielles Schwarzweiß- oder Farbfotopapier sowie keine Kalibrierungskarte des Farbfotopapiers, um die Druckqualität zu gewährleisten. 3.
5. Während des Druckvorgangs blockieren Sie nicht den Ausgang und berühren Sie das Fotopapier nicht, ansonsten wirkt sich die Druckqualität aus. Ziehen Sie das Fotopapier nicht zwangsweise, um die Druckqualität nicht zu beschädigen. 6.
9. Legen Sie die Batterie nicht in eine sehr hohe Temperaturumgebung, z. B. Sonnenlicht, Feuer, Mikrowellenherd, Backofen usw., andernfalls kann es zu den Explosionen oder der Leckage der brennbaren Flüssigkeit oder des Gases führen. 10. Legen Sie die Batterie nicht in die extrem niedrige Luftdruckumgebung, andernfalls kann es zu den Explosionen oder der Leckage der brennbaren Flüssigkeit und des Gases führen. 11. Wenn die Batterie stark schwellt, verwenden Sie sie nicht weiter. 12.
16. Direkte Sonneneinstrahlung muss vermieden werden, die empfohlene Lagertemperatur ist 0 ℃ bis 25 ℃, und die relative Luftfeuchtigkeit ist 40% bis 55%. 17. Die Kalibrierungskarte kann zum Reinigen des Druckkopfes verwendet werden, bitte bewahren Sie sie richtig. Hinweise: Die Abbildungen der Produkte, des Zubehörs und der Benutzeroberfläche in diesem Handbuch sind indikativ und dienen nur als Referenz.
Pearl K100 Portable Photo Printer Produktname: Tragbarer Fotodrucker Produktmodell: ZPP110 Nennleistung: 5V Batteriekapazität: 500 mAh FCC ID: 2AZHDZPP110 Produktgröße: 126×85×25 mm Produktnettogewicht: ~183 g Betriebstemperatur: 15°C~32°C Drahtlose Konnektivität: Bluetooth 5.0 1A Maximale Ausgangsleistung: 4.5 dBm Arbeitsfrequenz: 2402-2480 MHz Hersteller: Hannto Technology Co., Ltd. Adresse: Room 704, Building 1, No.
Présentation du produit Port de sortie de papier Indicateur de l'état Couvercle de la boîte de papier Bouton d'alimentation Voyant du niveau de batterie Port de charge USB-C 32
Bouton de réinitialisation Chargeur de papier de photo Avertissement: lors du plantage d l'appareil, utilisez un objet aïgu pour appuyer sur le bouton de réinitialisation et forcer l'arrêt de l'appareil. Manuel de l'utilisateur 1 Ouvrez le couvercle de la boîte de papier de l'imprimanteöffnen Pousser fermement le couvercle de la boîte de papier, lorsque vous endentez un son de « clic», le couvercle de la boîte de papier est en place.
2 Ajoutez le papier de photo noir et blanc ou de couleur selon vos besoins a.Ajouter le papier noir et blanc Déballez l'emballage du papier de photo, ajoutez l'ensemble du paquet de papier dans l'imprimante, et assurez que la surface brillante du papier de photo est vers le haut. b.
01 01 01 01 02 01 02 01 01 01 3 Fermez le couvercle de la boîte de papier Utilisez l'imprimante 1 Mise sous tension Appuyez sur le bouton d'alimentation pendant 3 secondes pour démarrer l'imprimante, le voyant d'état de l'imprimante s'allume en blanc, puis passe à l'orange clignotant, en attente de connexion avec le téléphone.
2 Le connectez à Liene Photo App 1.Recherchez le « Liene Photo» dans iOS App Store ou Google Play, ou scannez le code QR ci-dessous pour télécharger et installer l'App « Liene Photo». 2.Ouvrez la page d'acceuil de Liene Photo App, cliquez «+», ou cliquez l'icône «Switch Printer» en haut à gauche, sélectionnez «+», et ajoutez l'appareil selon l'avertissement de l'App.
Instructions relatives aux boutons 3s Appuyez sur le bouton d'alimentation pendant 3 secondes Démarrez/ Fermez l'appareil 7s Appuyez sur le bouton d'alimentation pendant 7 Restorez les paramètres d'usine Avertissement: Lors de la mise à niveau du micrologiciel, la mise à niveau ne sera pas interrompu si vous appuyez sur le bouton d'alimentation de manière courte ou longue.
Indicateur de l'état Témoin éteint Mise hors tension Allumé en blanc En veille Clignant en orange Le connectez à Bluetooth Clignant en blanc En train d'imprimer/ Mettre à niveau du micrologiciel Allumé en orange Panne de l'imprimante L'indicateur est Restorez les clignant en blanc paramètres et orange chacun d'usine pendant 1 seconde Dépannage L'application Liene vous alertera de diverses conditions d'erreur par le biais de messages dans l'application.
Garantie et assistance Merci d'avoir choisi Liene ! Nous espérons vraiment que vous apprécierez le produit ! Votre satisfaction est essentielle pour nous ! Liene offre une garantie d'un an pour ce produit, veuillez nous contacter immédiatement si vous rencontrez l'un des problèmes suivants, et nous vous fournirons un remplacement ou un remboursement. 1. Réception d'articles défectueux; 2. Emballage défectueux; 3. Les pièces sont cassées pendant le transport; 4.
Avertissements et précautions d'utilisation 1. La température d'utilisation optimale de l'imprimante est de 20℃~25℃, l'humidité relative est de 40%-60%, la température et l'humidité inappropriées affecteront la qualité d'impression et entraîneront le blocage de paper et l'impression incomplète. 2. Veuillez ne pas utiliser le papier de photo noir et blanc ou de couleur et la carte de calibrage du papier de photo de couleur non officiels pour garantir la qualité d'impression. 3.
5. Lors de l'impression, veuillez ne pas masquer le port de sortie de papier ou toucher le papier de photo, sinon cela affectera la qualité d'impression; ne pas déchirez le papier de photo pour éviter l'endommage de l'imprimante. 6.
9. Ne pas posez la batterie dans l'environnement à température trop élevée, tels que le soleil, le feu, le micro-ondes, le four, etc., sinon cela entraînera l'explosion ou la fuite du liquide ou du gaz combustible. 10. Veuillez ne pas poser la batterie dans l'environnement à pression trop faible, sinon cela entraînera l'explosion de la batterie ou la fuite du liquide ou du gaz combustible. 11. Si la batterie est gravement expandue, ne pas continuez l'utilisation. 12.
16. Évitez le soleil direct, la température de stockage recommandée est de 0℃~25℃, l'humidité relative est de 40%-55%. 17. La carte de calibrage peut être utilisée pour nettoyer la tête d'imprimante, veuillez la bien conserver. Remarque : les illustrations des produits, des accessoires et de l'interface utilisateur figurant dans ce manuel sont données à titre indicatif et pour référence uniquement.Le produit réel peut différer légèrement en raison des mises à jour et des mises à niveau du produit.
Pearl K100 Portable Photo Printer Nom du produit: Imprimante de photo portable Modèle: ZPP110 Puissance d'entrée nominale: 5V Capacité de la batterie: 500 mAh FCC ID: 2AZHDZPP110 Dimensions du produit: 126×85×25 mm Poids net du produit: ~183 g Température de fonctionnement: 15°C~32°C 1A Connectivité sans fil: Bluetooth 5.0 Alimentation en sortie maximale: 4.5 dBm Fréquence de fonctionnement: 2402-2480 MHz Fabricant: Hannto Technology Co., Ltd. Adresse: Room 704, Building 1, No.
Descripción general del producto Salida de papel Luz indicadora de estado Cubierta de la bandeja Botón de encendido Indicador de niveldebatería Puerto de carga USB-C 45
Botón de reinicio Tanque de papel fotográfico Nota: cuando la máquina se pone en colapso, presione el botón de reinicio con una aguja para apagarla por la fuerza. Manual de usuario 1 Abra la cubierta de la bandeja de la impresora Empuje la cubierta de la bandeja con fuerza hasta que escuche un "clic", indicando que la cubierta está en su lugar.
2 Agregue el papel fotográfico en blanco y negro o el en color, según sea necesario a.Colocar el papel fotográfico en blanco y negro Desempaque el papel fotográfico y coloque todo el paquete de papeles en la impresora, asegurando que la cara lisa del papel mire hacia arriba. b.
01 01 01 01 02 01 02 01 01 01 3 Cierre la cubierta de la bandeja Utilizar la impresora 1 Encender Mantenga presionado el botón de encendido durante 3 segundos para encender la impresora. La luz de estado de la impresora se enciende en blanco, luego pasa a parpadear en naranja, esperando la conexión con el teléfono.
2 Conectar con Liene Photo App 1.Busque "Liene Photo" en iOS App Store o Google Play, o escanee el código QR abajo para descargar e instalar "Liene Photo" App. 2.Abra la página de inicio de Liene Photo App, haga clic en "+" o en el icono "Switch Printer" en la esquina superior izquierda, elija "+" y sigue las instrucciones de App para agregar dispositivos. Nota: La mejora y la actualización de Liene Photo App podrían causar una poca diferencia entre la operación real y lo descrito arriba.
Instrucciones para los botones 3s Mantenga presionada el botón de encendido durante 3 segundos Encendido/ apagado 7s Mantenga presionada el botón de encendido durante 7 segundos Restaurar la configuración de fábrica Nota: En el estado de actualización de firmware, el presionado del botón de encendido durante un tiempo corto o largo no interrumpirá la actualización.Para ahorrar la energía de la batería, la impresora se apagará automáticamente cuando esté en espera durante más de 10 minutos.
Luz indicadora de estado Luz apagada Apagada Luz blanca encendida En espera Luz naranja parpadeante Conectar Bluetooth Luz blanca parpadeante En curso de impresión / Actualización de firmware Luz naranja encendida Falla de la impresora Los colores blanco Restaurar la y naranja brilla por configuración de 1 segundo fábrica Solución de problemas La aplicación Liene le avisará de varios estados de error a través de la mensajería de la aplicación.
Garantía & Asistencia técnica ¡Gracias por elegir a Liene! Esperamos que el producto sea de su agrado. Su satisfacción lo es todo para nosotros. Liene proporciona una garantía de 1 año para este producto, por favor, póngase en contacto con nosotros inmediatamente si se encuentra con cualquiera de los siguientes, y vamos a suministrar un reemplazo o reembolso. 1. La recepción de artículos defectuosos; 2. Embalaje corto; 3. Las piezas se rompen durante el transporte; 4.
Precauciones 1. La mejor temperatura y la humedad relativa para utilizar la impresora es de 20 ℃ ~ 25 ℃ y del 40% - 60%. La calidad de impresión se ve afectada por las temperatura y humedad ambientales inadecuadas, resultando el atasco de paples y una impresión incompleta. 2. No use el papel fotográfico no oficial tanto en blanco y negro como en color, a fin de garantizar la calidad de impresión. 3.
5. Durante la impresión, no cubra la salida de papel, tampoco no toque el papel fotográfico, de lo contrario, la calidad de la impresión se verá afectada; no tire el papel fotográfico por la fuerza para evitar daños en la impresora. 6.
9. No coloque la batería en un ambiente de temperatura extremadamente alta, tales como sol, fuego, horno microondas, horno, etc., de lo contrario, podrá causar explosión o fuga de líquido o gas inflamable. 10. No coloque la batería en un ambiente de presión de aire extremadamente bajo, de lo contrario, podrá causar explosión o fuga de líquido o gas inflamable. 11. Si la batería está muy hinchada, no continúe usándola. 12. Sólo se permite la batería aprobada por el fabricante.
16. Evite la exposición directa del luz solar, se recomienda almacenarlos en una temperatura de 0℃~25℃ y en una humedad relativa de 40%-55%. 17. La tarjeta de calibración se puede usar para limpiar la cabeza de impresión, por favor guárdela bien. Nota: Las ilustraciones de los productos, los accesorios y la interfaz de usuario que aparecen en este manual son indicativas y solo sirven de referencia. El producto real puede diferir ligeramente debido a actualizaciones y mejoras posteriores.
Pearl K100 Portable Photo Printer Impresora fotográfica portátil Nombre del producto: Modelo: ZPP110 Entrada nominal: 5V Capacidad de la batería: 500 mAh FCC ID: 2AZHDZPP110 Tamaño: 126×85×25 mm Peso neto: ~183 g Temperatura de funcionamiento: 15°C~32°C 1A Conectividad inalámbrica: Bluetooth 5.0 Potencia Máxima de Salida: 4.5 dBm Frecuencia de Trabajo: 2402-2480 MHz Fabricante: Hannto Technology Co., Ltd. Dirección: Room 704, Building 1, No.
Panoramica del prodotto Uscita di carta Indicatore di stato Coperchio della scatola di carta Pulsante di alimentazione Indicatore livello batteria Porta di ricarica USB-C 58
Pulsante di ripristino Fessura per carta fotografica Nota: quando il dispositivo si arresta in modo anomalo, premere il pulsante di ripristino con un ago per spegnerlo di forza. Manuale d'uso 1 Aprire il coperchio della scatola di carta della stampante Spingere il coperchio della scatola di carta finché si sente un "clic" che indica il coperchio è in posizione.
2 Caricare la carta fotografica in bianco e nero o a colori che desideri a.Caricare la carta fotografica in bianco e nero Aprire l'imballaggio della carta fotografica e inserire l'intero pacchetto nella stampante, assicurandosi che il lato lucido della carta sia rivolto verso l'alto. b.
01 01 01 01 02 01 02 01 01 01 3 Chiudere il coperchio della scatola di carta Utilizzo della stampante 1 Accensione Tenere premuto il pulsante di accensione per 3s per accendere la stampante. La spia di stato della stampante è accesa in bianco, poi diventa arancione lampeggiante, in attesa della connessione con il telefono.
2 Connettere a Liene Photo App 1.Cerca "Liene Photo" nell'iOS App Store o Google Play, o scansiona il codice QR qui sotto per scaricare e installare "Liene Photo App". 2.Aprire la pagina principale di Liene Photo App, fare clic su "+" o sull'icona "Switch Printer" nell'angolo in alto a sinistra e su "+" per aggiungere un dispositivo secondo le istruzioni dell'App. Nota: l'operazione effettiva può essere differente dalle istruzioni sopra a causa dell'aggiornamento di Liene Photo App.
Istruzioni relative ai pulsanti 3s Tenere premuto il pulsante di accensione per 3s Accendere/ Spegnere 7s Tenere premuto il pulsante di accensione per 7s Ripristino delle impostazioni di fabbrica Nota: Durante l'aggiornamento del firmware, premere a breve o a lungo il pulsante di accensione, l'aggiornamento non sarà interrotto. Per risparmiare la carica della batteria, quando la stampante se attende per più di 10 minuti, si spegnerà automaticamente.
Indicatore di stato Spia spenta Spegnimento Spia bianca accesa Stand-by Spia arancione lampeggiante Collegare bluetooth Spia bianca lampeggiante In stampa / Aggiornamento del firmware Spia arancione accesa Guasto alla stampante Dopo che la luce Ripristino delle bianco e arancione impostazioni di si accendono per fabbrica 1s ciascuno Risoluzione dei problemi L'app Liene segnala varie condizioni di errore attraverso la messaggistica in-app. Seguire le istruzioni dell'app per risolvere i problemi.
Garanzia & Supporto tecnico Grazie per aver scelto Liene! Speriamo che il prodotto vi piaccia. La vostra soddisfazione è tutto per noi. Liene fornisce una garanzia di 1 anno per questo prodotto, contattateci immediatamente se riscontrate uno dei seguenti problemi e vi forniremo una sostituzione o un rimborso. 1. Ricezione di articoli difettosi; 2. Imballaggio corto; 3. Le parti si rompono durante il trasporto; 4. L'articolo cessa di funzionare durante la garanzia; 5. Ordine sbagliato.
Avvertenze e avvisi 1. Per l'operazione ottimale, la temperatura della stampante è di 20℃~25℃ e l'umidità relativa è del 40%-60%. La temperatura e l'umidità dell'ambiente non idonee possono influire sulla qualità di stampa e causare anche inceppamenti della carta e stampa incompleta. 2. Non utilizzare la carta fotografica in bianco e nero oa colori non ufficiale o la scheda di calibrazione per carte fotografiche a colori per garantire la qualità di stampa. 3.
5. Durante la stampa, non bloccare l'uscita della carta né toccare la carta fotografica, altrimenti si può influire sulla qualità di stampa; non tirare con forza la carta fotografica per evitare danni alla stampante. 6.
9. Non esporre la batteria in un ambiente a temperatura estremamente elevata, e.s. luce solare, fuoco, forno a microonde, forno, ecc., altrimenti potrebbe comportare l'esplosione o la fuoriuscita di liquidi e gas infiammabili. 10. Non esporre la batteria a una pressione dell'aria estremamente bassa, altrimenti potrebbe comportare l'esplosione della batteria o la fuoriuscita di liquidi e gas infiammabili. 11. In caso di gonfiore della batteria, è vietato l'utilizzo. 12.
16. Evitare la luce solare diretta, la temperatura di conservazione consigliata è di 0 ℃ ~ 25 ℃ e l'umidità relativa è del 40% -55%. 17. La scheda di calibrazione può essere utilizzata per la pulizia della testina di stampa, conservarla in un luogo sicuro. Nota: le illustrazioni di prodotti, accessori e interfaccia utente in questo manuale hanno scopi esclusivamente indicativi e di riferimento. Il prodotto effettivo potrebbe essere leggermente diverso a seguito di aggiornamenti e migliorie al prodotto.
Pearl K100 Portable Photo Printer Nome del prodotto: Stampante fotografica portatile Modello del prodotto: ZPP110 Ingresso nominale: 5V Capacità della batteria: 500 mAh FCC ID: 2AZHDZPP110 Dimensioni del prodotto: 126×85×25 mm Peso netto del prodotto: ~183 g Temperatura di funzionamento: 15°C~32°C 1A Connettività wireless: Bluetooth 5.0 Potenza in uscita massima: 4.5 dBm Frequenza di funzionamento: 2402-2480 MHz Produttore: Hannto Technology Co., Ltd.
ご使用前に本製品の説明書をよくお読みになり、大切に保 存してください 製品概要 排紙口 ステータス表 示灯 トレイカバー 電源ボタン 残量表示ラン プ 71 USB-C 充電ポー ト
リセットキー 印画紙スロット ヒント : 機械がフリーズした場合、針でリセット キーを押して強制的にシャットダウンする。 ユーザーマニュアル 1 プリンタのトレイカバーを開ける トレイカバーを強く押して、「カチッ」と いう音がして、トレイカバーが所定の位置 になった。 72
2 必要に応じて白黒印画紙またはカ ラー印画紙を入れる a. 白黒印画紙を置く 印画紙の包装を外し、印画紙全体を一緒に プリンタに入れ、印画紙の光沢面を上にし ていることを確認する。 b.
01 01 01 01 02 01 02 01 01 01 3 トレイカバーを閉じる プリンタの使用 1 電源オン 電源キーを 3 秒間長押しして電源を入れる と、プリンタのステータスランプが常に白 色で点灯し、その後オレンジ点滅 に変わ り、携帯電話との接続が完了するまで待つ。 74
2 Liene Photo App に接続する 1.iOS App Store または Google Play で「Liene Photo」を検索するか、下の QR コードをス キャンして、「Liene Photo」app をダウン ロードしてインストールする。 2.
ボタンの使い方 3s 電源キーを 3 秒間長 押し 電源のオン/ オフ 7s 電源キーを 7 秒間長 押し 工場出荷時の 設定に戻す 注: ファームウェアのアップグレード中は、電源 キーを短く押したり長く押したりしても、アップ グレードは中断されません。バッテリーを節約す るため、プリンタは 10 分以上待機すると、自動 的にシャットダウンします。 残量表示ラン プ オレンジ点灯 電池残量低下 白色点灯 充電中 消灯状態 十分な電池残量 / フル充電 76
ステータス表示灯 消灯状態 電源オフ 白色点灯 待機する ブルーツースに接続 オレンジ点滅 白色点滅 印刷中 / ファームウェアのア ップグレード オレンジ点灯 プリンタ障害 白、オレンジを 1 秒ずつ点灯させて 工場出荷時の設定 に戻す トラブル対応 Liene アプリは、様々なエラー状態をアプ リ内のメッセージで知らせてくれます。ア プリの指示に従って問題を解決してくださ い。Liene フォトプリンターの特定の問題 については、global.liene-life.
保証とサポート Liene をお選びいただきありがとうございま す。私たちは、お客様が製品を楽しんでいた だけることを心から願っています。お客様の ご満足が私たちの全てです。 本製品には 1 年間の保証が付いています。以 下のような問題が発生した場合は、直ちに弊 社にご連絡ください。 1. 不良品を受け取った場合; 2. パッケージ内容不足; 3. 輸送中に部品が破損した場合; 4. 保証期間内に商品が動作しなくなった場 合; 5. 誤った注文品。 より迅速でプロフェッショナルなアフター サービスを提供するために、以下の方法で ご連絡いただけます 電子メール: liene.service@hannto.
ご注意 1. プリンタの最適な使用温度は 20℃ ~25℃、相対湿度は 40%-60% で、環境 温湿度が適切でないと印刷品質に影響 を与え、紙詰まり、印刷不全を引き起 こす。 2. 印刷品質を確保するために、非公式の 白黒またはカラー印画紙、およびカラ ー印画紙のキャリブレーションカード は使用しないでください。 3. 異なるパッケージのカラー印画紙とキ ャリブレーションカードを混ぜないで ください。混ぜると、印刷品質に影響 する。カラー印画紙を使用するときは、 パック全体を入れてから、使用後に再 度パック全体を入れ、元のパッケージ のキャリブレーションカードを使用し てキャリブレーションを行うことをお 勧めします。 4.
5. 印刷中は、印刷品質に影響を与えない ように、排紙口をふさいだり、印画紙 に触れたりしないでください;プリン タが破損しないように、印画紙を無理 に引っ張ってはいけない。 6. 印画紙を保存するとき、高温、直射日 光で印画紙が変色する;湿気のある環 境、水及びその他の溶液は印画紙を変 色及び曲げ変形させる;ごみは印画紙 の表面を傷つけたり、プリンターを傷 つけたりします。 7. 写真を貼り付けるときは、カールして 反り返ったり、脱ガムしたりしないよ うに、滑らかで平らな表面を選ぶ必要 がある。 8. プリンターにはリチウム電池が内蔵さ れており、高温環境を避けて保管し、3 ヶ月ごとに少なくとも 1 回充電し、浸 水後は使用を禁止する。 9.
10. 電池が爆発したり、可燃性の液体やガ スが漏れたりする恐れがあるので、極 低気圧環境に置かないでください。 11. バッテリが大きく膨張した場合は、そ れ以上使用しないでください。 12. メーカーが承認したバッテリのみ使用 できます。誤った仕様の電池で交換す ると安全防護が無効になり、爆発、火 災などの危険がある。 13. 爆発の原因となるため、電池を分解し たり、ぶつけたり、押したり、切った りしないでください。 14. 電池を生ゴミに捨てないで、使用済み の電池を適切な規定に従って安全に処 分してください。 15. 印画紙を子供が触れるところに置かな いでください。 16. 直射日光を避け、保存温度は 0℃ ~25℃、相対湿度は 40%-55% をお進め します。 17.
Pearl K100 Portable Photo Printer 製品名: 携帯型写真プリンタ 定格入力: 5V モデル: 電池の容量: FCC ID: 寸法: 正味重量: 動作温度: ワイヤレス接続: 最大出力: 動作周波数: ZPP110 1A 500 mAh 2AZHDZPP110 126 × 85 × 25 mm ~183 g 15° C~32° C Bluetooth 5.0 4.5 dBm 2402-2480 MHz 製造:Hannto Technology Co., Ltd. 場所:Room 704, Building 1, No.
注:此页为非印刷页面 尺寸 55x90mm 工艺 模切走位≦ ±0.5mm 材质 颜色 105g 金东太空梭,哑光双面铜版纸 100K Label name USER-MANUAL-OVERSEA Part number KW001-11002 Date 2022.05.31 Design by Rev. Notes Junhua 0.