Detailed design guide for EC(B)N models Storage centres for integrated use Version 11 / 2016_EN
Liebherr's engineering excellence in Germany provides the largest selection of refrigerators, freezers and wine cabinets worldwide. Liebherr is one of the world's leading manufacturers of premium refrigerators and freezers. For more than 60 years, Liebherr has specialised in developing and manufacturing first-class refrigerators and freezers as well as wine cabinets. We focus on performance and efficiency as well as keeping food fresher for longer.
Contents Design Guide Safety instructions .................................................................................................................................................... 4 Electrical requirements and safety ......................................................................................................................... 4 IceMaker ......................................................................................................................................................
General notes Safety instructions Electrical requirements and safety PLEASE READ AND FOLLOW THESE INSTRUCTIONS Only operate the appliance with alternating current (AC). This detailed design guide contains warnings and important notes. These instructions contain information for planning and for efficient, safe installation. Always read and follow all warnings and important notes. The maximum voltage and frequency depend on the appliance design for the country concerned.
General notes IceMaker Range of appliance use The IceMaker is fitted in the freezer compartment of the combined refrigerator-freezer. It must be connected to the mains water supply to work. The appliance is suitable solely for storing food in a domestic environment or similar. The appliance must be levelled to ensure that all the chambers in the ice-cube tray of the IceMaker are completely filled with water. See the section entitled Water connection for IceMaker for further details.
Storage centres for integrated use General description ECBN 5066 The appliance is available with the door hinged on the right or left. The door hinges can be reversed on both versions. The door hinge conversion kit is required for this purpose (see section entitled Accessories). EC(B)N 6156 The appliance is available with the door hinged on the right or left. The door hinges can be reversed on both versions. The door hinge conversion kit is required for this purpose (see section entitled Accessories).
Storage centres for integrated use Water connection for IceMaker A water supply line with a water shut-off valve and an R 3/4 connector is required for the IceMaker. IMPORTANT The water shut-off valve must not be situated behind the appliance and must be easily accessible to disconnect the appliance from the water supply if necessary. The water pressure must be between 1.5 and 6 bar. Safety instructions • The connection to the mains water supply may only be made by trained personnel.
Storage centres for integrated use Appliance dimensions of ECBN 5066 (height dimensions are with adjustable feet or castors fully screwed in) Door Hinge Include clearance for the open door for installations next to the wall. The refrigerator door must open at least 90° to enable the drawers in the refrigerator to be opened fully and the storage racks to be removed easily. The supplied ventilation grille can be adjusted in depth after installation.
Storage centres for integrated use Appliance dimensions of EC(B)N 6156 (height dimensions are with adjustable feet or castors fully screwed in) Door Hinge Include clearance for the open door for installations next to the wall. The refrigerator door must open at least 90° to enable the drawers in the refrigerator to be opened fully and the storage racks to be removed easily.
Storage centres for integrated use Appliance dimensions of EC(B)N 6256 (height dimensions are with adjustable feet or castors fully screwed in) See detailed drawing "Centre alignment strips" Centre alignment strip Door Hinge Detailed drawing Centre alignment strips Include clearance for the open door for installations next to the wall. The refrigerator door must open at least 90° to enable the drawers in the refrigerator to be opened fully and the storage racks to be removed easily.
Storage centres for integrated use Methods of installation Internal door panel External door panel The door panel fits inside the body of the kitchen unit; the front of the unit is visible. The door panel rests on the panels of the kitchen unit; the front of the unit is covered by the door panel.
Storage centres for integrated use Recess dimensions for ECBN 5066 The appliance stands on the floor between two kitchen units. If the appliance is integrated into a kitchen unit, the panel width must be adjusted accordingly. The dimensions quoted in the section entitled "Panel dimensions" are without a separate kitchen unit. From this point, the free length of the mains cable is 2200 mm. The socket must not be situated behind the appliance and must be easily accessible.
Storage centres for integrated use Recess dimensions for EC(B)N 6156, EC(B)N 6256 The appliance stands on the floor between two kitchen units. If the appliance is integrated into a kitchen unit, the panel width must be adjusted accordingly. The dimensions quoted in the section entitled "Panel dimensions" are without a separate kitchen unit. IMPORTANT This area is visible when the door of the appliance is open. An attractive optical surface is to be provided.
Storage centres for integrated use Height adjustment in the recess ECBN 5066 Height adjustment in the recess EC(B)N 6156 Adjust the appliance in the recess to a reference height of 869 mm, measured from the floor to the top of the upper freezer drawer. IMPORTANT This height adjustment is very important. It provides the basis for the correct positioning of the front panels.
Storage centres for integrated use Height adjustment in the recess EC(B)N 6256 Adjust the appliance in the recess to a reference height of 869 mm, measured from the floor to the top of the upper freezer drawer. IMPORTANT This height adjustment is very important. It provides the basis for the correct positioning of the front panels.
Storage centres for integrated use Appliance venting No ventilation openings are required in the kitchen unit for the EC(B)N appliance series. The air is exchanged through the appliance plinth. Refrigerant R600a The refrigerant R600a used in the appliances is environmentally friendly but inflammable. WARNING Danger of fire through overheating as a result of inadequate ventilation. Do not cover the ventilation openings. Only use the ventilation grille supplied for the appliance plinth.
Storage centres for integrated use Panel dimensions for ECBN 5066 Internal door panel External door panel plus overlap at the top 762 mm (recess width) Recess height Recess height plus overlap at the right and left Panel height = 526 mm minus plinth height Plinth height min. = 50 mm max. = 170 mm Panel height = 526 mm minus plinth height Plinth height min. = 50 mm max.
Storage centres for integrated use Panel dimensions for EC(B)N 6156 Internal door panel External door panel plus overlap at the top 915 mm (recess width) Recess height Recess height plus overlap at the right and left Panel height = 526 mm minus plinth height Plinth height min. = 50 mm max.
Storage centres for integrated use Panel dimensions for EC(B)N 6256 Internal door panel External door panel 454.5 mm 454.5 mm plus overlap at the left plus overlap at the right Recess height Recess height plus overlap at the top 915 mm (recess width) Panel height = 526 mm minus plinth height Plinth height min. = 50 mm max. = 170 mm plus overlap at the right and left Panel height = 526 mm minus plinth height Plinth height min. = 50 mm max.
Storage centres for integrated use View from above Door panel collision grid - internal door panel ECBN 5066, EC(B)N 6156 The illustration shows the gaps required to avoid collisions with neighbouring parts when the door is opened. The illustration is in original size. If you print out this page, ensure that no scaling has been set in the printer options.
Storage centres for integrated use View from above Door panel collision grid - external door panel ECBN 5066, EC(B)N 6156 The illustration shows the gaps required to avoid collisions with neighbouring parts when the door is opened. The illustration is in original size. If you print out this page, ensure that no scaling has been set in the printer options.
Storage centres for integrated use View from above Door panel collision grid - 16 mm internal door panel EC(B)N 6256 The illustration shows the gaps required to avoid collisions with neighbouring parts when the door is opened. The illustration is in original size. If you print out this page, ensure that no scaling has been set in the printer options.
Storage centres for integrated use View from above Door panel collision grid - 19 mm internal door panel EC(B)N 6256 The illustration shows the gaps required to avoid collisions with neighbouring parts when the door is opened. The illustration is in original size. If you print out this page, ensure that no scaling has been set in the printer options.
Storage centres for integrated use View from above Door panel collision grid - 16 mm external door panel EC(B)N 6256 The illustration shows the gaps required to avoid collisions with neighbouring parts when the door is opened. The illustration is in original size. If you print out this page, ensure that no scaling has been set in the printer options.
Storage centres for integrated use View from above Door panel collision grid - 19 mm external door panel EC(B)N 6256 The illustration shows the gaps required to avoid collisions with neighbouring parts when the door is opened. The illustration is not to original size. Right side wall of the appliance housing Front of the appliance housing Side wall of the kitchen unit 19 mm front panel Door closed panel 105° front le 19 mm ening ang op Door IMPORTANT min.
Storage centres for integrated use Panel dimensions for accessory stainless steel panels and gap dimensions EC(B)N 6156 Recess height Recess height ECBN 5066 Recess height EC(B)N 6256 26
Storage centres for integrated use Accessories Illustration Part No.
Storage centres for integrated use Illustration Part No. Description For use with model 9900 333-00 Stainless steel panel, refrigerator door (installations with internal door panel only) EC(B)N 6156 9900 337-00 Stainless steel panel, refrigerator door (installations with internal door panel only) EC(B)N 6256 Note The use of these panels requires the door opening to be limited to 95°. The door opening limiter pins (Part No. 9096 214-00) must be inserted into the hinges (see Accessories, page 31).
Storage centres for integrated use Illustration Part No.
Storage centres for integrated use Illustration Part No. Description For use with model 9900 157-00 Side-by-side installation kit Contains side wall heater, heater transformer, connecting elements, covers and installation instructions. ECBN 5066 9900 155-00 Side-by-side installation kit Contains side wall heater, heater transformer, connecting elements, covers and installation instructions.
Storage centres for integrated use Illustration Part No.