BLUETOOTH® SPEAKER/ XXX SBL TW3 A1 BLUETOOTH® SPEAKER Operation and Safety Notes Distributed by / Distribuido por: LIDL US, LLC, Arlington, VA 22202 Model No. / Modelo Núm.
US-EN Operation and Safety Notes Page US-ES Instrucciones de utilización y de seguridad Página 3 XX
Description of signal words . . . Page 5 Customer service . . . . . . . . . . . . . Page 6 Warnings and symbols used . . Page 7 Introduction . . . . . . . . . . . . . . . . . Intended use . . . . . . . . . . . . . . . . . . Trademark notices . . . . . . . . . . . . . . Scope of delivery . . . . . . . . . . . . . . Parts description . . . . . . . . . . . . . . . Technical data . . . . . . . . . . . . .
Using the product . . . . . . . . . . . . Establishing a Bluetooth® connection . . . . . . . . . . . Functions of the buttons . . . . . . . . . . Connecting via the AUX-in jack . . . . Switching between AUX-in and Bluetooth® connections . . . . . . TWS pairing . . . . . . . . . . . . . . . . . . Page 28 Page Page Page 29 30 34 Page Page 35 35 Cleaning . . . . . . . . . . . . . . . . . . . . .
DESCRIPTION OF SIGNAL WORDS WARNING indicates a hazardous situation that, if not avoided, could result in death or serious injury. CAUTION indicates a hazardous situation that, if not avoided, could result in minor or moderate injury. NOTICE indicates information considered important, but not hazard related (e.g. messages related to property damage).
CUSTOMER SERVICE Call customer service at 1 (844) 543-5872 Visit the Website Customer Service Platform at www.lidl.com/contact-us Visit a LIDL store for further assistance. Please have your IAN number ready.
Warnings and symbols used These instructions for use contain the following symbols and warnings: DANGER! This symbol with the signal word “DANGER“ indicates a hazard with a high level of risk which, if not avoided, will result in serious injury or death. WARNING! This symbol with the signal word “WARNING“ indicates a hazard with a medium level of risk which, if not avoided, could result in serious injury.
ATTENTION! This symbol with the signal word “ATTENTION“ indicates possible property damage. NOTE: This symbol with the signal word “NOTE“ provides additional useful information. This mandatory sign indicates to wear suitable protective gloves! Follow the instructions of this warning to avoid hand injuries caused by objects or contact with hot or chemical materials. This symbol means that the operating instructions must be observed before using the product.
BLUETOOTH® SPEAKER Introduction Congratulations on your purchase. You have selected a quality product. The instructions for use are a part of the product. They contain important information about the safety, use and disposal of the product. Before using the product, please learn about all the safety information and usage instructions. Only use the product as described and for the specified applications. If you lend the product to someone else, please also give all the instructions.
The built-in rechargeable battery allows for cordless operation. The product is designed for private use, must not be used for commercial purposes. Any other use is considered improper. Any claims resulting from improper use or due to unauthorised modification of the speaker will be considered unwarranted. Any such use is at your own risk. Trademark notices ‒U SB® is a registered trademark of USB Implementers Forum, Inc.
‒A ny other names and products are trademarks or registered trademarks of their respective owners. Scope of delivery Remove all packaging material and check the contents of the packaging for completeness. Please contact the dealer if parts are missing or damaged. 1 Bluetooth® Speaker 1 Charging cable (Micro USB / USB type A) 1 AUX cable (3.
Parts description 1 AUX-in jack 2 LED (AUX-in indicator) 3 LED (battery changing indicator) 4 Micro-USB charging socket 5 LED (Bluetooth®/TWS indicator) 6 Button 7 8 9 10 11 12 13 12 button (decrease volume / skip backwards /beginning of title) button (play / pause) button (increase volume / skip key forwards) TWS button Speaker Charging cable (Micro USB / USB type A) 3.
1 5 6 11 14 12 2 3 4 7 8 9 10 13 15 US-EN 13
Quick start guide 15 Instruction for use Technical data Micro USB socket power supply: 5 V , 500 mAh Battery power supply: 1 x 3.7 V rechargeable lithium-ion battery with 1200 mAh (Battery is not replaceable.) Music output: max. 3 W RMS Wireless standard: Bluetooth® 5.0 Frequency band: 2400 MHz–2483.5 MHz Max. transmitted power: 1 mW Charging socket: micro-USB AUX-in jack: 3.5 mm jack plug Dimensions H x dia.: 3.5 in x 2.
Weight: 8.8 Oz (250 g) Operating conditions: 50°F - 104°F (10 °C–40 °C), 40 % –85 % rel.
IMPORTANT SAFETY NOTES READ ALL INSTRUCTIONS. KEEP FOR FUTURE REFERENCE. INCLUDE ALL DOCUMENTATION WHEN PASSING THIS PRODUCT ON TO OTHERS. Failure to observe the following warnings can result in death or serious injuries.
Suffocation hazard! Never leave children unsupervised with the packaging material. The packaging material poses a suffocation hazard. Children frequently underestimate the dangers. The packaging material is not a toy. This product is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the product by a person responsible for their safety.
This product has been tested and complies with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This product generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
• Reorient or relocate the receiving antenna. • Increase the separation between the product and receiver. • Connect the equipment to an outlet on a different circuit than the one the receiver is connected to. • Consult the dealer or an experienced radio / TV technician for help. This product complies with part 15 of the FCC Rules.
could impact the functionality of sensitive electronics. Keep the device at least 7.874 in (20 cm) from pacemakers or implantable cardioverter defibrillators, as the electromagnetic radiation may impair the functionality of pacemakers. The radio waves transmitted could cause interference in hearing aids. Do not place the device near flammable gasses or potentially explosives areas (e.g. paint shops) with the wireless components on, as the radio waves emitted can cause explosions and fire.
cables and devices not distributed by Lidl US LLC. The user of the device is fully responsible for correcting interference caused by such unauthorized modification of the device, as well as replacement of such devices. The RF Exposure Compliance distance is 5 mm. This product does not contain any parts which can be serviced by the user. The rechargeable battery cannot be replaced. Failure to observe the following warnings may result in death or serious injuries.
Do not place burning candles or other open fire on or next to the product. If you notice smoke or unusual noise or odor, switch the product off immediately and remove the USB cable. Do not throw the product into fire or expose it to high temperatures. Do not cover the product during use or charging. Only charge the battery in dry environments, since the product is not splash-proof.
allow the product to acclimate for some time before using it again to prevent short circuits! Do not operate the product near heat sources, e.g. radiators or other devices emitting heat! Do not try to open the product! It has no internal parts requiring maintenance. afety instructions for S built-in rechargeable batteries Failure to observe the following warnings may result in fatal or serious injuries.
children. If accidentally swallowed, seek immediate medical attention. DANGER OF EXPLOSION! Never recharge disposable batteries. Do not short-circuit batteries / rechargeable batteries and / or open them. They may overheat, ignite or explode. Never throw batteries / rechargeable batteries into fire or water. Do not exert mechanical loads to batteries / rechargeable batteries. Batteries should not be disassembled, crushed, punctured, opened or otherwise mutilated.
Failure to observe the following warnings can result in injuries or property damage. Avoid extreme environmental conditions and temperatures which could affect batteries / rechargeable batteries, e.g. radiators / direct sunlight. Avoid contact with the skin, eyes and mucous membranes. In the event of contact with battery acid, thoroughly flush the affected area with plenty of clean water and seek immediate medical attention.
This product contains an integrated battery which cannot be replaced by the user. The battery may only be removed or replaced by the manufacturer or his customer service or by a similarly qualified person in order to avoid hazards. SAVE THESE INSTRUCTIONS Before use Before use, verify the package contents are complete and undamaged! Place the product on a level, even surface for operation.
Charging The integrated rechargable battery must be charged prior to first use. NOTE: This product may not be charged via the USB port of notebooks etc. When the integrated rechargable battery is drained, there will be a notification sound signal every 2 minutes and the LED 3 will blink red. The integrated rechargable battery should then be charged as soon as possible. Depending on the volume and the age of the battery, the operating time of the product is 19 hours of music playback when fully charged.
the charging cable 12 into the USB port on a USB adapter (not included in scope of delivery). NOTE: The LED 3 will light up red whilst charging and change to green once charging is complete. The charging time for a drained battery is 3 hours. NOTE: The product may be used whilst charging. However, doing so will at a minimum double the charging time. Once charging is complete, remove the micro- USB plug of the charging cable 12 from the product.
attempt to connect to the playback device (e.g. smartphone or computer). Establishing a Bluetooth® connection: Remove all plugs from the AUX-in jack 1 before you attempt to establish a Bluetooth® connection. Switch on the playback device and make sures its Bluetooth® mode is on. On the product press and hold the button 6 for 2 seconds until the LED 5 flashes white and a signal tone sequence sounds. The product will now attempt to connect to the playback device (e.g. smartphone or computer).
Please note the requirements of the software on the playback device. Once the connection is amde the LED 5 will light up white and a signal tone sequence sounds. The maximum range of the connection is 39.37 in /10 m, but this may be reduced due to the geometry of the space (obstructing furniture, walls, etc.). The playback device must support Bluetooth® standard 5.0 otherwise you may not be able to use all the functions. Functions of the buttons Start a playlist on your playback device.
Button Function ‒ Press and hold for 2 seconds to switch the product on or off. ‒ Press briefly during playback to pause or continue playback. ‒ Press and hold for 2 seconds to enable / disable the Bluetooth® connection.
Button Function ‒ Briefly press to pair two units before they connect to an external Bluetooth® playback device. A signal tone will be heard if pairing has been carried out successfully. ‒ Briefly press again to break the current TWS connection, a signal tone will be heard. ‒ Press briefly during playback to increase the volume, one beep will sound when the maximum volume has been reached. ‒ Press and hold during playback to skip forwards to the next song in the playlist.
Button Function ‒ Press briefly during playback to decrease the volume, one beep will sound when the minimum volume has been reached. ‒ Press and hold during playback to skip backwards to the previous song in the playlist. NOTE: When you change the volume on the product the volume on the playback device will also so change. This volume synchronisation function depends on the operating system and the brand of your playback device.
Connecting via the AUX-in jack NOTE: Music playback via the AUX-in jack 1 has a higher priority over a Bluetooth® connection. Once the AUX cable 13 is plugged into the AUX-in jack 1 , the Bluetooth® wireless connection will be disconnected. Music playback is now switched to AUX-in only and the LED 2 lights up green. If the product is off, press and hold the button 8 until the signal LED 2 lights up green and a signal tone sequence sounds. Switch the playback device on and start playback.
7 buttons. Switching between AUX-in and Bluetooth® connections To resume music playback via Bluetooth® connection unplug the AUX cable 13 from the AUX-in jack 1 . The product will then search for the previously paired playback device (if any) and re-establish the Bluetooth® connection automatically. TWS pairing NOTE: This function is only available if two of these products have been purchased and both have the same model number.
Press the button 7 on one of the products which will then by default set it as the „master“ unit. A beep will sound. When pairing between both products has been carried out successfully, the LED 5 of the connected „slave“ unit stops flashing and a sequence of beeps will sound. The „master“ unit LED 5 will still be flashing waiting to pair with the playback device.
NOTE: The product which had its button 7 pressed first will become the „master“ unit (in the left audio channel), and the other unit will then by default becone the „slave“ unit (in the right audio channnel). Cleaning Switch the product off and remove all cables before cleaning. Only clean the outside of the product using a soft, dry cloth! Storage during non use Store the product in a dry environment when not in use. Protect it from dust and direct sunlight.
Troubleshooting = Fault = Possible cause = Action = No functions = Battery drained. = Recharge the battery as described in the “Charging“ section of these instructions. No Bluetooth® connection Error operating the product. If necessary, unplug the AUX cable 13 from the AUX-in jack 1 . witch the product off and on again and S increase the volume. Playback device error.
heck to see if the product was detected by C the playback device. heck to see if the playback device has C detected and connected to any other devices with Bluetooth® Standard 5.0. No music playback via Bluetooth® Error operating the product. Check to see if the AUX cable 13 is still inserted into the AUX-in jack 1 , if it is remove it. I f the product is switched on, turn it off and on again. Press and hold the button 6 to start a new connection to the playback device.
o music playback via AUX-in N connection Error connecting the AUX cable 13 Reconnect the AUX cable 13 to the playback device. T he volume at the playbak device or at the product is too low and has to be increased. P Disposal Dispose of the packaging through your local recycling facilities and in compliance with all federal, state and local regulations.
Contact your local waste management authority for additional information on how to dispose of the used product. To help protect the environment, please dispose of the product properly when it has reached the end of its useful life, do not throw in the garbage. Information on collection sites and their opening hours is available from your local authority. ispose of the packaging through D their opening hours is available from your local authority.
Pb = lead. Used batteries should therefore be disposed of through a local collection point. P Three year limited warranty What does this warranty cover? The warranty covers: • Damage, breakage or inoperability due to defect. • Damage not caused by normal wear and tear or failure to follow the safety and maintenance instructions provided in the user manual.
• Disregarding safety and maintenance instructions; • Accidents or acts of nature (e.g. lightning, fire, water, etc.); • Tampering with the product (such as removing cover, unscrewing screws etc.) Consequential and incidental damages are also not covered under this warranty. However, some states do not allow the exclusion or limitation of incidental or consequential damages, so this limitation or exclusion may not apply to you.
What will we not do? We will not: • Start a new warranty period upon product exchange; • Repair product. How to process the warranty? To initiate, please: • Call customer service at 1 (844) 543-5872 • Visit the Website Customer Service Platform at www.lidl.
• The product and manual in the original package; • A statement of the problem. What must you do to keep the warranty in effect? • Retain the original receipt; • Follow all product instructions; • Do not repair or modify the product. How does state law relate to this warranty? This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. All implied warranties are limited by the duration and terms of this warranty.
