User's Manual

LibreStream Technologies, Inc.
General inquiries: 204.487.0612
Support: 800.849.5507
[e-mail]
www.LibreStream.com
LED Indicators
LED Name Indicator
Power Green = On or Standby
Network Green = Network available
Off = Network unavailable
Battery Orange = Battery is charging
Off = Battery is charged or power
is not connected.
Basic Operation
Before You Start
The n_sight MCD2000 is designed to communicate with an
MCA (Mobile Collaboration Application) software client on
a PC, using a network that has already been set up and
congured.
• For more information on operating the MCD2000, see the
MCD2000 User Manual provided on the n_sight CD.
• For information on the MCA software client, see the MCA
User Manual provided on the n_sight CD.
Turning Power On
If the MCD is Off or in Standby mode, press and release the
power button.
Going to Standby
Press and release the power button to go to Standby mode.
The Viewnder turns off to use less power but the Power LED
remains on.
Note: The MCD will automatically enter Standby mode if it is
on but not used for a period (default two minutes).
Turning Power Off
If the MCD is On or in Standby mode, press and hold the
power button for two seconds to turn the MCD Off.
Mobile Collaboration Device
freedom to collaborate
© LibreStream Technologies Inc. 2006 - 2008
Logging in
If your installation requires a login, you will be prompted
with a login screen on the Viewnder, as shown below.
To login:
1. Tap the Username eld with the stylus and select your user
name from the list (your
site administrator will
provide this to you).
2. Tap the Password eld
with the stylus. An
onscreen keyboard will
appear.
3. Use the stylus to tap
characters to enter them
in the Password eld.
4. Tap the Login button to
nish logging in.
Important: When you are using the Viewnder screen,
always use the stylus provided with the MCD2000. Do not use
other objects, as this could damage the Viewnder screen.
Displaying the Directory
Press the Send button to display the Directory window.
Starting a Call
Display the Directory and use the stylus or navigation pad to
select a name from the Local Contacts list. Then press Send
to start the call. You will hear outgoing rings or a busy signal.
Answering an Incoming Call
To answer a call, press Send.
Turning Streaming On or Off
When a call has been established (you can talk to the other
user), press the green button on top of the MCD to start
streaming media to the MCA software client. Press it again to
stop streaming.
Ending a Call
To end a call, press the End button.
Quick Start Guide
Logging in on the Viewnder screen