User's Manual

ManualsBrandsLibre Wireless Technologies ManualsElectronicsWireless Audio Module

User Manual

LS6-N22S-M

SPECIFICATIONS

1.power up for MT7620A with 5V&1A

2.connect with the PC to get IP address automaticlly.

3.run the CMD on PC ,type the word "wifi" and return,then input

the IP address:10.10.10.254 and return again.

4.run the MT7620A's QA tools which given by the supplier.

5.choose the " network card" option on the UI,knock OK,then enter

operation steps for work environment.

6. The MT7620 router module with two antenna portsˈwhich

pattern is MOMI,the two antenna are the same one

The antenna manufacturer˖Dongguan City Senling Industry Co.,Ltd

Model Name˖SLA-100020108-C10

Antenna gain˖2dBi

Summary of content (10 pages)

PAGE 1
User Manual LS6-N22S-M SPECIFICATIONS 1.power up for MT7620A with 5V&1A 2.connect with the PC to get IP address automaticlly. 3.run the CMD on PC ,type the word "wifi" and return,then input the IP address:10.10.10.254 and return again. 4.run the MT7620A's QA tools which given by the supplier. 5.choose the " network card" option on the UI,knock OK,then enter operation steps for work environment. 6.
PAGE 2
˖ FCC Statement˖ This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
PAGE 3
FCC Radiation Exposure Statement The modular can be installed or integrated in mobile or fix devices only. This modular cannot be installed in any portable device, for example, USB dongle like transmitters is forbidden. This modular complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
PAGE 4
3.Applications: 1.Routers 3.NAS devices 2.iNICs 4.Dual band concurrent routers 4.General Specification Model WL-AM01B-7620A-V2.0 Product Name WLAN 11b/g/n Major Chipset MT7620A Standard IEEE802.11n ǃIEEE 802.11gǃIEEE 802.11b Data Rate Transfer 1,2,5.5,6,11,12,18,22,24,30,36,48,54,60,9 0,120 and maximum of 300Mbps Frequency Band Power Consumption Dimension Hardware Supp ort Ambient Temperature Range 2.4GHz 3.3 V ±10% I/O supply voltage 40.0 x 26.0 x 3.25mm (LxWxH) +-0.
PAGE 5
.Block Diagram 6. Electrical Specifications 1.DC Characteristics Module Voltage Current Consumption (linking) WL-AM01B-7620A-V2.0 3.3V 220MA(Ϟ㔥៪㗙ⳟ⬉ᕅᯊⱘࡳ㗫) 2) RF Characteristics for IEEE802.11b ( 11Mbps mode unless otherwise specified) Items Contents Specification IEEE802.11b Mode DSSS/CCK 11 Mbps Channel frequency 2412 ~ 2484 MHz RX (per) -85 dBm FREQ ERR LIMIT f13PPM TX Characteristics Power Level Min. (17±2 dBm) EVM ˄<-18˅ Typ. Max.
PAGE 6
4) RF Characteristics for IEEE802.11n (HT20_MCS7) Items Contents Specification IEEE802.11n (HT20_MCS7) Mode HT20_MCS7 Channel frequency 2412 ~ 2484 MHz RX (per) -65 dBm FREQ ERR LIMIT ±13PPM TX Characteristics Power Level 65 Mbps Min. Typ. (13±2dBm) EVM Max. Unit 13 dBm -28 dB 5) RF Characteristics for IEEE802.11n (HT40_MCS7) Items Contents Specification IEEE802.
PAGE 7
8.Module Pin Assignment Pin Function Description 1 3.3VD 3.3VD 2 GND Ground 3 I2C_SCLK I2C_SCLK 4 I2C_SDA I2C_SDA 5 GPIO0 GPIO0 6 PORST_N PORST_N 7 UART_TXD1 UART_TXD1 8 UART_RXD1 UART_RXD1 9 UART_CTS1 UART_CTS1 10 UART_RTS1 UART_RTS1 11 UART_TX UART_TX 12 UART_RXD2 UART_RXD2 13 GND Ground 14 I2SMCLK I2SMCLK 15 I2SDI I2SDI 16 I2SDO I2SDO 17 I2SWS I2SWS 18 I2SCLK_N I2SCLK_N http://www.rf-link.
PAGE 8
19 GND Ground 20 GPIO24 GPIO24 21 WLAN_LED WLAN Activity LED 22 GPIO25 GPIO25 23 GPIO26 GPIO26 24 GND Ground 25 USB_DM USB_D- 26 USB_DP USB_D+ 27 GND Ground 28 BT_WACT GPIO 29 BT_AUX GPIO 30 BT_STAT GPIO 31 3.3VD 3.3VD 32 3.3VD 3.
PAGE 9
The picture of top The picture of bottom 9.Circuit reference pictures 1.SD part reference. http://www.rf-link.
PAGE 10
2.USB part reference circuit. 3. 10.Pin Header http://www.rf-link.