Quick Start Guide

Libre Home

DirectPlug‐inRelayControl:PRU



InputRating:120VAC,60Hz

RatedLoad:1800W(resistive),1/2Hp,15A



QuickStartGuide

1. PlugcontroltoACMainsoutlet.

2. Donotplugyourloadyet!

3. LaunchLibreHomeSmartphoneApp

4. NavigatetoHubConfiguration

5. Navigateto“Device”

→”AddNewDevice”.

6. Choose“PluginSwitch/Dimmer”.

7. Followinstructionsonscreen.

8. Oncejoinednetwork,plugloadtothe

outletofcontrol.



 Caution:Useindoorindrylocation

PAGE 1
Libre Home Direct Plug‐in Relay Control: PRU Input Rating: 120VAC, 60Hz Rated Load: 1800W(resistive), 1/2Hp, 15A Quick Start Guide 1. 2. 3. 4. 5. 6. 7. 8. Plug control to AC Mains outlet. Do not plug your load yet! Launch Libre Home Smartphone App Navigate to Hub Configuration Navigate to “Device” → ”Add New Device”. Choose “Plug in Switch/Dimmer”. Follow instructions on screen. Once joined network, plug load to the outlet of control.
PAGE 2
FCC STATEMENT 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.