LW100 User Manual Libratone A/S LW100 User Manual Libratone ConfidentialPage 1 of 14FCC ID: Y2SLW100 8/25/2015 IC: 9452A-LW100
LW100 User Manual Libratone A/S Content Content ........................................................................................................................................... 2 Set up the Module .......................................................................................................................... 3 FCC Statement ................................................................................................................................ 4 General Information..............
LW100 User Manual Libratone A/S Set up the Module LW100 is a Wi-Fi module which supports IEEE802.11a/b/g/n. The typical application is to integrate it into the loud speaker or related home audio entertainment products. The module can provide Wi-Fi connection with various Wi-Fi sound sources. Please follow below steps to setup the module: 1. Power up the Wi-Fi modulewith 3.8V. 2. Connect the module with EVK main board provided by supplier. 3.Connect Wi-Fi with audio resource, such as iphone. 4.
LW100 User Manual Libratone A/S FCCStatement CAUTION: (1) Any changes or modifications not expressly approved by the grantee of this devicecould void the user's authority to operate the equipment.
LW100 User Manual Libratone A/S IC Statement This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareilestconforme auxCNR d’Industrie Canada applicables auxappareils radio exempts de licence.
LW100 User Manual Libratone A/S General Information Product Name Wi-Fi Module Product Model LW100 Major Chipset 88W8782-xx-NAP2C005-P123 Standard IEEE802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n Data TransferRate 802.11b 1,2, 5.5,11Mbps; 802.11a/g 6,9,12,18,24,36,48,54Mbps; 802.11n MCS1 to MCS7, maximum data rate is up to 72Mbps (20MHz channel) and 150Mbps (40MHz channel) FrequencyBand 2.4GHz, 5GHz Working Voltage 3.3 V ±10% I/O supply voltage 3.8V±10% powersupply Dimension 52.0 x 26.
LW100 User Manual Libratone A/S Block Diagram 3.3V/100mA SPI/ NAND LPDDRx1 /DDR2x2 1.8V/300mA JTAG SDRAM T I2S: M/S 44.1K/48K/96K/32bit ATMEL ATSAMA5D31 (Cortex A5 536MHz) SDIO Marvell 88W8782S 802.11a/b/g/n 1x1 SISO 1.2V/129mA 1.8V/100mA 3.3V/23mA R S P D T 5G 2.4G 2.4/5G Wi-Fi Diversity Antenna 3.3V/100mA 1.8V/120mA IF: 5xUART 2xUSB 3xI2C 2xSPI JTAG S P D T Di pl ex 1.2V/1A 32.768 KHz 25MH z 40MHz ETHERNET 3.3V/ 500mA 1.8V/1A PMU 3.
LW100 User Manual Libratone A/S Electrical Specification 1. DC characteristics Voltage 3.8V Current Consumption (linking) 265mA 2. RF Characteristics for IEEE802.11b ( 11Mbps mode unless otherwise specified) Items Contents Specification IEEE802.11b Mode DSSS/CCK 11 Mbps RX (per) -87dBm Frequent Limit +/-13PPM TX Characteristics EVMTypical=-28dB 3. RF Characteristics for IEEE802.11a/g( 54Mbps mode unless otherwise specified) Items Contents Specification IEEE802.
LW100 User Manual Libratone A/S RX (per) -67dBm FREQ ERRLIMIT +/-13PPM TX Characteristics EVMTypical= - 27dB 5. RF Characteristics for IEEE802.11n (HT40_MCS7) Items Contents Specification IEEE802.
LW100 User Manual Libratone A/S Pin Assignment Pin Function Description 1 3.
LW100 User Manual Libratone A/S 25 USB_D- USB_D- 26 USB_D+ USB_D+ 27 GND Ground 28 BT_WACT GPIO 29 BT_AUX GPIO 30 BT_STAT GPIO 31 3.8VD Power supply 32 3.
LW100 User Manual Libratone A/S 52 SD_CLK SD_CLK 53 GND Ground 54 CON_GPIO28 CON_GPIO28 55 NC NC 56 CON_GPIO23 CON_GPIO23 57 CON_GPIO29 CON_GPIO29 58 BT_ACT GPIO 59 GND Ground 60 BT_ANT/GPIO59 BT_ANT/GPIO59 Libratone ConfidentialPage 12 of 14FCC ID: Y2SLW100 8/25/2015 IC: 9452A-LW100
LW100 User Manual Libratone A/S Mechanical Specification 1. Dimension Dimensions (mm) Length Width Height 52.0±0.2 26.0±0.2 3.25±0.
LW100 User Manual Libratone A/S 2.