Q ADAPT ON-EAR User Manual BACK TO TOP > App Download > Button And Inteface Instruction > Bluetooth Connection > Basic Operation > Status Indication > Plus 1 > FAQ > Product Specification App Download Apple iOS Android * Or search 'Libratone' in Apple App Store or Google Play to download App Button And Inteface Instruction
① Power Button ② Function Button ③ Line-in ④ Charging Indicator Light ⑤ Charging Port Charging Port Line-in The charging light breathes when charging and is solid on when fully charged When the audio cable is plugged in Bluetooth connection will be disabled Bluetooth Connection
2.Enter Bluetooth Pairing Mode 1.Power on The headphone will enter Bluetooth pairing Long press the power button until the Nightingale mode automatically during the first run, this is indicated by a side-to-side sequence on the is lit on right ear-cup top *Press the Nightingale for 2 seconds to enter Bluetooth pairing mode 3.Select Product 4.Connected Find and select your Libratone Q ADAPT On Ear in the Bluetooth device list of your phone The lights will blink twice when connected.
① Touch Interface ② Status Indicator Lights Volume Control Rotate your finger clockwise or counterclockwise along the touch interface to adjust volume Playback and talk control Multi fingers tap the touch interface to play & pause / answer & end a call Double tap to next song Long press to enable siri/reject call(when HUSH Pause the music and hear the world by covering the touch interface with the palm of your hand repeat to resume playback
headphone and iOS device connected with Bluetooth) * Multi fingers tap, more accurate and easier to operate CityMix™ noise control Battery Indicator Short press the function button to adjust CityMix™ noise control level Tap the power button to check battery level when turned on Status Indication
The Nightingale Bottom Light Lit at 100% when playing, lit at 50% Continuous blinking when low battery when paused Triple blinking when battery is too low to be powered Breathing when no connection on Blinking when incoming call * By default, the lights will get off automatically when the headphone is put on.
Playback is interrupted? Normally, the working distance is 10m at a non-sheltered area.
