Installation Instructions

Using the Controls on Beat
--To activate the toy push the button, on the underside of the toy, nearest the
shaftfor 1 second.
For perineum vibration continue to push to scroll through the 6 functions
available.
For shaft thumper modes, push the button, on the underside of the toy, to
scroll through the 6 functions available. Once is activated, scroll through the
functions to find your combination of choice.
To turn off, simply hold the down for 3 seconds.
Using the remote control
To use the remote control you will first need to turn Beat ON by pushing the
vibration button on the underside of the toy. Once ON you can control the toy
with the remote control up to 8 metres away. To change the shaft thumpermodes
simply press the thumper button on the remote control .
To change the perineum stimulator vibration simply press vibration button on the
remote control .
One remote control can be programmed to use with more than one Beat. To do this
simply hold down the vibration buttons on the toys for 3 seconds until the light
flickers red. The lights will turn green on all toys when the remote control ON/OFF
buttons are pressed.