Trident 101 Wireless Spy Fishing Camera User Manual
Product Package Content After the product package is opened, please check whether or not all items in the package are intact and complete. In case of any shortage or damage of items, please contact the dealer immediately.
Product Feature Introduction Wireless Spy Fishing Camera (Referred to as TX ) Camera Lens Prior to recording, please ensure that the lens surface is clean. Power Key Press this key to turn the device on/off. Charger Waterproof Protective Cap (USB Type C) Charging socket is inside the device and provides a charging function when the 18650 battery is installed. During use, please do not damage the protective cap to ensure that the device waterproof function.
RF Connection State Indicator Constant Green Light : connection is proper. (Automatic Connection) Flickering Green Light : connection is poor. Battery Charging Indicator Constant Red Light : charging is in process. Constant Green Light : charging is complete. Rear Cover Rotate to open the rear cover for replacement of the 18650 lithium battery. Antenna Float Unit During video recording, please prevent this part from being shielded by foreign objects that may affect the antenna performance.
Battery Installation Rotate to open rear cover and push antenna float unit rearward. Confirm the battery positive and negative electrode directions and place the battery into the device. Align ❽ with the positioning structure and fasten ❼ back to the device. Please be sure to fasten the device firmly to ensure the waterproof function.
Product Feature Introduction Wireless Spy Fishing Camera (Receiver) (Referred to as RX ) Power Indicator Constant Blue Light : Device is turned on and is under the standby state. RF Connection State Indicator Constant Blue Light : Connection is proper. (Automatic Connection). Flickering Blue Light : Connection is poor. Power Key Toggle this key to turn the device on/off. USB Type C Port Connect to transmission cable for power supply and video transmission.
Memory Card Slot Please insert user s own Micro SD memory card. (Maximum of 128GB Supported) HDMI Port Connect to transmission cable . (video transmission). Touch Pad For monitor viewing and operation of various functions. External Antenna Receive image signals transmitted from TX end Touch Indicator Flashing Red Light : Single click for more than 0.5 second and then release to feed back the operating action.
Insert Memory Card Wireless Spy Fishing Camera (Receiver) - RX Attention: Before inserting a new memory card into the device for the first time, it is necessary to complete the formatting first, in order to ensure the normal function use. Prior to the use of the device, it is required to insert a memory card in order to use the video recording and photo HDMI shooting function. Micro SD Type C ON OFF Please hold the edge of Micro SD card and please be aware of the label direction.
Hardware Connection Wireless Spy Fishing Camera (Receiver) - RX Method 1: Connect to TV Monitor Display Monitor Power Bank (Purchase by yourself ) HDMI Cable Device-RX Turn on the power of Device-RX ,and wait for the indicator to light up. Conrm that all connection cables are connected completely. Turn on device power and RX unit and TX unit are able to per form pairing and connection automatically. Turn on the monitor and the screen display the shooting range of the camera.
Hardware Connection Method 2: Connect to Mobile Phone or Tablet (Presently, only Android system is supported.) Power Transmission Cable OGT Adapter (Purchase by yourself ) Tablet Power Transmission Cable OR OGT Adapter Device-RX Smart Phone Turn on the power of Device-RX ,and wait for the indicator to light up. Conrm that all connection cables are connected completely. Turn on device power and RX unit and TX unit are able to per form pairing and connection automatically.
Hardware Connection Method 3: Connect to Mobile Phone or Tablet (Type-Y Male/Female Connection Cable) When the device is for long-term outdoor use, to prevent insufficient power of the mobile phone or tablet, it is suggested to use a Type-Y Male/Female Connection Cable (optional) for connection to a mobile power source (optional).
Hardware Operations Wireless Spy Fishing Camera - TX Power On Touch the power key gently, the indicator is lit up and the device is ready for operations. Power Off Long press the power key for 3~5 seconds, the indicator goes off and the device is turned off. Charging The device uses 18650 lithium battery for the supply of power. Prior to the use under standby state, please charge the battery completely.
Hardware Interface Operations Wireless Spy Fishing Camera (Receiver) - RX Fill Light Key Zoom-in Key Photo Key Video Rec Key (Note: During operations, only one single key can be clicked on. When multiple keys are pressed at the same time, device error may occur*) Fill Light Key- TX unit fill light brightness adjustment Press this single key for more than 0.5 second and then release the key, and the red light is lit up.
Video Rec Key Press this single key for more than 0.5 second and then release the key, and the red light is lit up. Videos are saved in the SD card. (MicroSD must be inserted into the RX unit to record videos.) Screen Interface Introduction User can use the TV Monitor to view the camera screen directly and the status bar on the top to determine the TX unit status. :indicates the power level of the TX unit. :indicates the connection quality of the RX unit.
Memory Card Formatting Wireless Spy Fishing Camera (Receiver) - RX Attention: Before inserting a new memory card into the device for the first time, it is necessary to complete the formatting first, in order to ensure the normal function use. After connecting the RX unit to a monitor equipment, power on and connecting the screen to the monitor, user can use two fingers to press the two keys of ❶ Fill Light Key and ❷ Zoom-in Key simultaneously for approximately 5 seconds.
Safety Regulations FCC Statement: Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Product Warranty We thank you for choosing Trident 101 product. From the date of your purchase, you are entitled to warranty services satisfying the following conditions: Within seven days after the purchase of the device, in case you discover any defect or failure, you may choose to return or exchange the device. After seven days of your purchase, you are entitled to a warranty period of twelve months starting from the date of purchase indicated on the invoice or warranty sticker.
Product Warranty Repair Service and Warranty Clause G-sau guarantees that all products have been tested completely in order to prevent defects of raw material and manufacturing process. In addition, all products comply with the specification announced.