English Español HBS-800 User Manual BLUETOOTH® Stereo Headset Rev 2.0 US All rights reserved. LG Electronics Inc., 2013 Note: Please read all information carefully prior to using HBS-800 in order to prevent damages to the product and to enjoy the best performance. WARNING : This product contains chemicals known to the State of California to cause cancer and birth defects or reproductive harm. Wash hands after handling.
Table of Contents ENG 2 Introduction - Included in the package 3 3 Description of Parts 3 How to Use 4 - Charging 4 - Low Battery 4 - Battery Status Alert 4 - Power On / Power Off 4 - Pairing 5 - ANC - Ambient Noise Cancelling 6 - Multi-connection 7 - Auto Reconnect 8 - Audio Streaming Controls 8 - Equalizer 9 ® - aptX 9 - Volume Control 9 - Calling 9 • Answering a call 9 • Transferring a call 9 • Voice dialing 9 • Last number redial 9 • Ending a call 10 • Call waiting 10 • Rejec
The LG TONE ULTRATM (HBS-800) is a lightweight wireless headset that uses Bluetooth® technology. This product can be used as an audio accessory for devices supporting either the A2DP or Hands-Free Bluetooth Profile.
How to Use Charging ENG - When the charger is connected, with the power switched on or off, the headset will turn off. - While charging, the LED indicator will show a solid red light. - When charging is complete, the LED indicator will turn off. - When ANC is ON, the LED remains lit in violet and charging is not completed. Please turn off the ANC. Low Battery - A low battery alert will play once every 2 minutes. - If the battery is not charged, the headset will turn off.
How to Use - Before using the headset for the first time, you must pair it with a Bluetooth-enabled device. - There are 2 pairing mode methods with the HBS-800. ENG Pairing 1) Easy Pairing a) Slide the power switch to the “ON” position. b) If it is your first time pairing the device it will automatically enter pairing mode. If it has been paired but no paired device is in range it will enter pairing mode after 10 seconds. • The LED indicator will be solid blue.
How to Use ANC - Ambient Noise Cancelling ENG Ambient Noise Cancelling is new technology that reduces ambient noise in a noisy environment. It provides a better listening experience to you. 1) Performance Ambient Noise Cancelling actively reduces more background noise than any other noise cancellation technology. 2) Activating / Deactivating a) Slide the ANC switch to the “ON” position. b) The LED indicator will show a solid violet light and you will hear “ ANC On”.
How to Use Advanced Multipoint The HBS-800 is capable of having two devices connected to the headset at the same time. This will give you the freedom of using call waiting between calls on both of your connected phones. ENG Multi-connection Connection 1. P air the headset with one of your Bluetooth-enabled phones. (per the pairing instructions on page 4). 2. Turn the headset off and use the Manual Pairing method as described on page 5 to enter Pairing Mode. 3.
How to Use Auto Reconnect ENG - If the HBS-800 is turned off (either accidentally or intentionally) while connected to a phone, the headset and phone will disconnect. The headset and phone will automatically reconnect when the HBS-800 is turned back on while in range. - The secondary phone will need to be connected manually. Select “LG HBS-800” from the list of devices in the Bluetooth menu and pair.
Equalizer - While playing music, press and hold the VOLUME UP and VOLUME DOWN buttons at the same time for 1 second to switch between EQ’s (Bass Boost(Default) g Normal g Treble Boost). - The bass coming from the speakers can vary as a result of the size of the earbud that is being used. ENG How to Use aptX® - The HBS-800 features aptX® technology that ensures audio content transmitted over Bluetooth is instant and crystal-clear.
How to Use ENG Ending a Call - Briefly press the CALL button. Call Waiting - Answer a second call without hanging up the first call by pressing and holding the CALL button for 1 second. Press and hold the CALL button for 1 second to return to the original call. - Briefly press the CALL button to terminate both calls at once. Rejecting a Call - Activate call reject by pressing and holding the CALL button for 1 second when the phone rings. * These functions may only be used if your phone supports them.
Summary of Button Functions HBS-800 Status Power on Power off Power off ANC on ANC off Volume up Volume down Transferring a call Answering a call Stop incoming call vibration alerting Ending a call Call waiting Last number redial Voice dialing (phone must support) Power on Action Slide the power switch to the ‘ON’ position. Slide the power switch to the ‘OFF’ position. Slide the ANC switch to the ‘ON’ position. Power on/off Slide the ANC Switch to the ‘OFF’ position.
LED Indicator Function ENG HBS-800 Status Power on Power off Action The blue LED light flickers 5 times. The blue LED light flickers 5 times and then turns off. ANC on The solid violet LED light stays on. Operating Pairing mode The solid blue LED light stays on. Headset / hands-free profile connected Call connected Charging Charging Charging complete The blue LED light flickers 2 times every 5 seconds. The blue LED light flickers 2 times every 5 seconds. The red LED stays on. LED turnes off.
Specification Bluetooth® specification Battery Talk Time Music play time Standby time ANC time(with power off or Standby) ANC time(with playing or talking) Charging time Operation temperature Dimension / weight Description 3.0 (Headset / Hands-Free / A2DP Profiles) Battery 3.7V / 195mAh Li-Polymer Up to 10Hrs Up to 10Hrs Up to 400Hrs Up to 18Hrs Up to 6Hrs < 2.0Hrs 14°F ~ 140°F (-10°C ~ 60°C) 135.6mm(W) X 160mm(L) X 14mm(T) / 32g ENG Item Precautions Do not drop the device.
Declaration of Confirmation ENG FCC NOTICE TO USERS: This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference and (2) This device must accept any interference received, including interference that may cause undesired operation. IMPORTANT NOTE: To comply with the FCC RF exposure compliance requirements, no change to the antenna or the device is permitted.
2. Potentially explosive atmosphere Turn off your electronic device when in any area with a potentially explosive atmosphere. Although this is uncommon, your electronic device could generate sparks. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death. Areas with a potentially explosive atmosphere are often, but not always, clearly marked. ENG Additional Information 3.
Additional Information ENG 16 6. Conditions - The warranty is valid only if the original receipt issued to the original purchaser by the dealer, specifying the date of purchase and serial number, is presented with the product to be repaired or replaced. LG Electronics reserves the right to refuse warranty service if this information has been removed or changed after the original purchase of the product from the dealer.
Subject to the conditions of this Limited Warranty, LG Electronics warrants this product to be free from defects in design, material and workmanship at the time of its original purchase by a consumer, and for a subsequent period of one (1) year. Should your product need warranty service, please return it to the dealer from whom it was purchased or contact your local LG Electronics contact center to get further information.
MEMO
Any modifications or changes to this manual due to typographical errors or inaccuracies of stated information shall only be made by LG Electronics Inc www.lg.