OWNER'S MANUAL DRYER Read this owner's manual thoroughly before operating the appliance and keep it handy for reference at all times. ENGLISH DL*360** MFL70442685 Rev.00_030724 www.lg.com Copyright © 2024 LG Electronics Inc. All Rights Reserved.
TABLE OF CONTENTS 3 IMPORTANT SAFETY INSTRUCTIONS 3 4 READ ALL INSTRUCTIONS BEFORE USE WARNING STATEMENTS 8 PRODUCT OVERVIEW 8 Product Features 10 INSTALLATION 10 11 15 15 16 17 18 19 21 22 Before Installing Choosing the Proper Location Leveling the Appliance Reversing the Door Installing the Vent Kit Stacking the Appliance Venting the Dryer Connecting Gas Dryers Connecting Electric Dryers Final Installation Check 25 OPERATION 25 26 28 30 33 34 Before Use Loading the Dryer Control Panel Dry Cy
IMPORTANT SAFETY INSTRUCTIONS 3 IMPORTANT SAFETY INSTRUCTIONS Safety for a Dryer WARNING Fire Hazard Failure to follow safety warnings exactly could result in serious injury, death or property damage. • • Do not install a booster fan in the exhaust duct. Install all clothes dryers in accordance with the installation instructions of the manufacturer of the dryer. WARNING: FIRE OR EXPLOSION HAZARD Failure to follow safety warnings exactly could result in serious injury, death or property damage.
IMPORTANT SAFETY INSTRUCTIONS WARNING Risk of Fire Install the clothes dryer according to the manufacturer’s instructions and local codes. • • • Clothes dryer installation must be performed by a qualified installer. Do not install a clothes dryer with flexible plastic venting materials. If flexible metal (foil type) duct is installed, it must be of a specific type identified by the appliance manufacturer as suitable for use with clothes dryers.
IMPORTANT SAFETY INSTRUCTIONS 5 • The appliance must be installed and electrically grounded by qualified service personnel in accordance with local codes. • Disconnect the power cord, house fuse or circuit breaker before installing or servicing the appliance. • Keep packing materials out of the reach of children. Packaging material can be dangerous for children. There is a risk of suffocation. • Moving or installation of the appliance requires two or more people.
IMPORTANT SAFETY INSTRUCTIONS • If you detect a strange sound, a chemical or burning smell, or smoke coming from the appliance, unplug it immediately, and contact an LG Electronics customer information center. • Never unplug the appliance by pulling on the power cord. Always grip the plug firmly and pull straight out from the outlet. • Do not use an extension cord or adapter with this appliance. • Do not grasp the power cord or touch the appliance controls with wet hands.
IMPORTANT SAFETY INSTRUCTIONS 7 • Do not put living animals such as pets inside the appliance. • Do not put any part of your body, such as your hands or feet, or metal objects under the appliance. • Do not let your hand get pinched when opening or closing the dryer door. Maintenance • Do not repair or replace any part of the appliance. All repairs and servicing must be performed by qualified service personnel unless specifically recommended in this Owner’s Manual.
PRODUCT OVERVIEW PRODUCT OVERVIEW Product Features The images in this guide may be different from the actual components and accessories, which are subject to change by the manufacturer without prior notice for product improvement purposes.
PRODUCT OVERVIEW 9 Product Specifications Model DL*360** Please refer to the rating label for detailed information. Dimensions (Width X Depth X Height) 27'' X 30 1/8'' X 39'' (68.6 cm X 76.5 cm X 99 cm) Maximum Depth with Door Open 51 3/8'' (130.5 cm) Net Weight Gas : 136.03 lb (61.7 kg) - 139.34 lb (63.2 kg) Electric : 121.9 lb (55.3kg) - 125.3 lb (56.8 kg) Capacity 7.4 cu.ft. (22.5 lb / 10.2 kg) Gas Requirements NG: 4 - 10.5-inch (10.2 - 26.7 cm) WC LP: 8 - 13-inch (20.4 - 33.
INSTALLATION INSTALLATION Before Installing Installation Overview Please read the following installation instructions first after purchasing this dryer or transporting it to another location. a Choose the proper location. b Level the appliance. c Vent the appliance. d Connect the inlet hose (for steam models) e Connect the Gas dryer. f Plug in the power cord. g Installation test and test run. • Refer to the Test Exhaust System section in INSTALLATION.
INSTALLATION 11 Choosing the Proper Location Exhaust • The location must allow for proper exhaust installation. A gas dryer must be exhausted to the outdoors. Electricity Use an individual, grounded electrical outlet located within 2 ft. (61 cm) of either side of the appliance. WARNING • Do not install or store the appliance in an area where it will be exposed to water and/or weather.
INSTALLATION Dimensions and Clearances The following clearances are recommended for the appliance. • Additional clearances should be considered for ease of installation and servicing. • Additional clearances should be considered on all sides of the dryer to reduce noise transfer. Installation Spacing for Recessed Area or Closet Installation - Description Dimension/Clearance A Upper Ventilation Opening 2 48 sq. in. (310 cm2) B Lower Ventilation Opening 2 24 sq. in.
INSTALLATION 13 Closet Ventilation Requirements NOTE • There should be at least a little space around the dryer (or any other appliance) to eliminate the transfer of vibration from one appliance to another. If there is enough vibration, it could cause appliances to make noise or come into contact, causing paint damage and further increasing noise. • No other fuel-burning appliance can be installed in the same closet as a dryer.
INSTALLATION Installation Spacing for Cabinet For cabinet installation with a door, minimum ventilation openings in the top of the cabinet are required.
INSTALLATION 15 Leveling the Appliance WARNING • The appliance is heavy. Two or more people are required when installing the appliance. • If you are installing the appliance on the optional pedestal, you must use the leveling feet on the pedestal to level the appliance. The appliance leveling feet should be fully retracted. Reversing the Door Checking the Level Position the appliance in the final location and place a level across the top of the appliance.
INSTALLATION 2 While supporting the door, remove the 2 screws on the door hinge. Remove the door. Installing the Vent Kit WARNING • Use long-sleeved gloves and safety glasses. • Use a heavy metal vent. • Do not use plastic or thin foil ducts. 3 • Clean old ducts before installing the appliance. Turn the door upside down and line up the holes in the hinge with the holes on the opposite side of the cabinet. Reinstall the door with the screws removed in step 2.
INSTALLATION 17 3 d 3 Preassemble a 4" (10.2 cm) elbow e to the next 4" (10.2 cm) duct section, and secure all joints with duct tape. Be sure that the male end of the elbow faces AWAY from the dryer. Insert the elbow/duct assembly through the side opening and press it onto the adapter duct. Secure it in place with duct tape. Be sure that the male end of the duct protrudes 1.5" (3.8 cm) to connect the remaining ductwork. Attach the cover plate f to the back of the dryer with the included screw.
INSTALLATION 1 Make sure the surface of the washer is clean and dry. Remove paper backing from the tape on one of the stacking kit side brackets. Venting the Dryer WARNING • Gas dryers MUST exhaust to the outdoors. • To reduce the risk of fire, combustion, or accumulation of combustible gases, DO NOT exhaust dryer air into an enclosed and unventilated area, such as an attic, wall, ceiling, crawl space, chimney, gas vent, or concealed space of a building.
INSTALLATION 19 Ductwork Wall Cap Type Recommended 0 65 ft. (19.8 m) 1 55 ft. (16.8 m) 2 47 ft. (14.3 m) 3 36 ft. (11.0 m) 4 28 ft. (8.5 m) 0 55 ft. (16.8 m) 1 47 ft. (14.3 m) 2 41 ft. (12.5 m) 3 30 ft. (9.1 m) 4 22 ft. (6.7 m) a a a: 4 ‘’ (10.2 cm) Use for only short run installations b b: 2.5 ‘’ (6.35 cm) Correct Venting Incorrect Venting NOTE • Deduct 6 ft. (1.8 m) for each additional elbow. Do not use more than four 90° elbows.
INSTALLATION • This dryer must be plugged into a 120-VAC, 60Hz. grounded outlet protected by a 15-ampere fuse or circuit breaker. • Where a standard 2-prong wall outlet is encountered, it is your personal responsibility and obligation to have it replaced with a properly grounded 3-prong wall outlet. Gas Supply Requirements WARNING • DO NOT attempt any disassembly of the dryer; disassembly requires the attention and tools of an authorized and qualified service technician or company.
INSTALLATION 21 5 Turn on your laundry room’s gas supply. Check all pipe connections (both internal and external) for gas leaks with a noncorrosive leak-detection fluid. 7 Proceed to Venting the Dryer. • The appliance has its own terminal block that must be connected to a separate 230 VAC, 60Hertz, single-phase circuit, fused at 30 amperes. (The circuit must be fused on both sides of the line.) ELECTRICAL SERVICE FOR THE APPLIANCE SHOULD BE OF THE MAXIMUM RATE VOLTAGE LISTED ON THE NAMEPLATE.
INSTALLATION Final Installation Check Once you have completed the installation of the dryer and it is in its final location, confirm proper operation with the following tests. Test Dryer Heating Gas Models Close the dryer door and press the Power button to turn the dryer on. Press the Time Dry and Start/Pause buttons to start the test. When the dryer starts, the igniter should ignite the main burner.
INSTALLATION 23 on and the temperatures in the drum will be measured. Check the display for results. • During the test cycle, monitor the Flow SenseTM display on the control panel. If no bars are displayed, when the cycle ends, the exhaust system is adequate. If the exhaust system is severely restricted, the display will show four bars. Other problems may also be shown with error codes. See the chart on the next page for error code details and solutions.
INSTALLATION Check for blockages and lint buildup. Make sure the ductwork is not crushed or restricted.
OPERATION 25 OPERATION WARNING • To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT SAFETY INSTRUCTIONS before operating this appliance. Operation Overview 1 Clean the Lint Filter • If the lint filter has not already been cleaned, lift out the filter and remove the lint from the last load. This will help ensure the fastest and most efficient drying performance. Make sure to reinstall the filter, pressing down until it clicks firmly into place.
OPERATION fingers. Push the lint filter firmly back into place. See Regular Cleaning for more information. Woven and Loopknit Materials • Some woven and loopknit materials may shrink, depending on quality. Permanent Press and Synthetics • Do not overload your dryer. Take out permanent press items as soon as the dryer stops to reduce wrinkles. Baby Clothes and Nightgowns • Always check the manufacturer’s instructions. Always ensure that the lint filter is properly installed before running the dryer.
OPERATION 27 Tumble Dry Label Directions Do not dry (used with do not wash) Heat Setting Label Directions High Medium Low No Heat / Air ENGLISH Do not tumble dry
OPERATION Control Panel Control Panel Features a Power Button • Press the button to turn the appliance on. Press again to turn the appliance off. NOTE • Pressing the Power button during a cycle will cancel that cycle, and any load settings will be lost. b Cycle Selector Knob • Turn this knob to select the desired cycle. Once the desired cycle has been selected, the standard presets will be shown in the display.
OPERATION 29 Time and Status Display ENGLISH a Clean Filter Reminder • The Clean Filter indicator lights up at the beginning of the cycle to remind you to check the lint filter. It turns off when the Start/Pause button is pressed. b Cycle Status Indicators • Dry lights up when the appliance is in the drying stage. • Cool lights up when the appliance is in the cool down stage. c Estimated Time Remaining • When a drying cycle is selected, the estimated drying time for the selected cycle is displayed.
OPERATION Dry Cycles Turn the knob or press the button to select the desired cycle. When you select a dry cycle the light for the corresponding dry cycle will turn on. Sensor Dry Cycles Sensor dry cycles utilize LG's unique dual sensor system to detect and compare the moisture level in clothes and in the air and adjust the drying time as needed to ensure superior results. The appliance automatically sets the dryness level and temperature at the recommended setting for each cycle.
OPERATION 31 Cycle Temperature Towels Default: Med. High Delicates Description Use this cycle for drying dress shirts/blouses, nylons, lingerie, or sheer and lacy clothes which can easily be damaged. Dry Level Default: Normal Available: All Temperature Default: Low Available: Low Cycle Perm. Press Description Use this cycle to minimize wrinkles when drying tablecloths or wrinkle-free clothes.
OPERATION Selectable Drying Options Cycle Normal Heavy Duty Option Energy Saver† Wrinkle Care Damp Dry Signal # # # # # Bedding Small Load # Towels # # Delicates # # Perm. Press # # Speed Dry # Air Dry # † This option helps to reduce the energy use by drying clothes at lower temperatures than the normal mode. When this option is set, the drying time will increase.
OPERATION 33 Cycle Modifiers About Modifier Buttons Dry Level Use this button to select the dryness level for the cycle. Press the Dry Level button repeatedly to scroll through available settings. • The appliance will automatically adjust the cycle time according to the selected dryness level. Selecting More or Very will increase the cycle time, while Less or Damp will decrease the cycle time. • Use a Less or Damp setting for items that you wish to iron. Temp.
OPERATION Options and Extra Functions Your dryer includes several additional cycle options to customize cycles to meet your individual needs. Select the desired option after selecting the desired cycle and settings. NOTE • The LED for the option will light up when the option is selected. • To protect your garments, not every option is available with every cycle. • A chime will sound twice and the LED will not light up if the selected option is not allowed for the selected cycle.
OPERATION 35 2 Press and hold the Time Dry and Energy Saver buttons for 3 seconds to activate/ deactivate this function. ENGLISH • When the function is deactivated, a chime will sound and the remaining time for the current cycle will reappear on the display.
SMART FUNCTIONS SMART FUNCTIONS LG ThinQ Application The LG ThinQ application allows you to communicate with the appliance using a smartphone. LG ThinQ Application Features • Dryer Cycle - Download new and specialized cycles that are not included in the standard cycles on the appliance. Appliances that have been successfully connected to the LG ThinQ application can download a variety of specialty cycles specific to the appliance.
SMART FUNCTIONS 37 3 NOTE • You may be asked to provide a password to connect to the LG network (not your home network) during the Wi-Fi setup. The password is the last 4 characters of the network name, repeated twice, with no spaces. For example, if the network name appears as LG_XXXX_8b92, then you would enter 8b928b92 as your password. The password is case sensitive and the last 4 characters are unique to your appliance.
SMART FUNCTIONS Wireless LAN Module Specifications Frequency Range 2412 - 2462 MHz Output Power (Max) < 30 dBm Industry Canada Statement This device contains licence-exempt transmitter(s)/ receiver(s) that comply with Innovation, Science and Economic Development Canada’s licenceexempt RSS(s). Operation is subject to the following two conditions: This offer is valid to anyone in receipt of this information for a period of three years after our last shipment of this product.
SMART FUNCTIONS 39 Press and hold the Temp. button for 3 seconds or longer while continuing to hold your phone to the Power button. 4 Keep the phone in place untill the tone transmission has finished. Once the tones have stopped, the diagnosis will be displayed in the application. NOTE • For best results, do not move the phone while the tones are being transmitted.
MAINTENANCE MAINTENANCE WARNING • Unplug the appliance before cleaning. • Never use harsh chemicals, abrasive cleaners, or solvents to clean the appliance. They will damage the finish. Regular Cleaning Cleaning the Exterior Cleaning the Lint Filter Always clean the lint from the filter after every cycle. Proper care of your appliance can extend its life. The outside of the appliance can be cleaned with warm water and a mild, nonabrasive household detergent.
MAINTENANCE 41 3 NOTE • NEVER operate the appliance without the lint filter in place. ENGLISH If the lint filter has become very dirty or clogged with fabric softener, wash the lint filter in warm, soapy water and allow it to dry thoroughly before reinstalling.
TROUBLESHOOTING TROUBLESHOOTING FAQs Frequently Asked Questions Q: When I press a button, why does my dryer beep and then nothing happens? A: The Control Lock feature is turned on. To turn off Control Lock, turn the dryer on and press and hold the button that has Control Lock on or under it for 3 seconds. Q: Why does my dryer take so long to dry clothes? A: Proper airflow is critical to the efficient operation of clothes dryers.
TROUBLESHOOTING 43 Before Calling for Service Error Messages Problem tE1 through tE7 Possible Cause & Solution Temperature sensor failure. • Turn off the appliance and call for service. Power cord is connected incorrectly. Ps • Check the connection of the power cord to the terminal block. d8O, dGO, dGs Exhaust system is too long or has too many turns/restrictions. • Do not use the appliance until the exhaust system has been cleaned and/or repaired.
TROUBLESHOOTING Problem Possible Cause & Solution The appliance will not turn on. House fuse is blown, circuit breaker has tripped, or power outage has occurred. The appliance does not heat. House fuse is blown, circuit breaker has tripped, or power outage has occurred. • Reset circuit breaker or replace fuse. Do not increase fuse capacity. If the problem is a circuit overload, have it corrected by a qualified electrician. • Reset circuit breaker or replace fuse. Do not increase fuse capacity.
TROUBLESHOOTING 45 Problem Drying time is not consistent. Possible Cause & Solution Heat settings, load size, or dampness of clothing is not consistent. Performance Problem Clothes are wrinkled. Possible Cause & Solution Clothes dried too long (overdried). • Overdrying a load of laundry can lead to wrinkled clothes. Try a shorter drying time or use a lower dry level setting and remove items while they still retain a slight amount of moisture. Clothes left in dryer too long after cycle ends.
TROUBLESHOOTING Problem Excess static in clothes after drying. Possible Cause & Solution Fabric softener is not used or is used incorrectly. • Use a fabric softener or the Reduce Static option, if available, to reduce static electricity. Be sure to follow the manufacturer’s instructions. Clothes dried too long (overdried). • Overdrying a load of laundry can cause a buildup of static electricity. Adjust settings and use a shorter drying time, or use Manual Dry cycles.
TROUBLESHOOTING 47 Problem The router frequency is not 2.4 GHz. • Only a 2.4 GHz router frequency is supported. Set the wireless router to 2.4 GHz and connect the appliance to the wireless router. To check the router frequency, check with your Internet service provider or the router manufacturer. The appliance and the router are too far apart. • If the appliance is too far from the router, the signal may be weak and the connection may not be configured correctly.
LIMITED WARRANTY LIMITED WARRANTY CANADA TERMS AND CONDITIONS ARBITRATION NOTICE: THIS LIMITED WARRANTY CONTAINS AN ARBITRATION PROVISION THAT REQUIRES YOU AND LG TO RESOLVE DISPUTES BY BINDING ARBITRATION INSTEAD OF IN COURT, UNLESS THE LAWS OF YOUR PROVINCE OR TERRITORY DO NOT PERMIT THAT, OR, IN OTHER JURISDICTIONS, IF YOU CHOOSE TO OPT OUT. IN ARBITRATION, CLASS ACTIONS AND JURY TRIALS ARE NOT PERMITTED. PLEASE SEE THE SECTION TITLED “PROCEDURE FOR RESOLVING DISPUTES” BELOW.
LIMITED WARRANTY 49 THIS LIMITED WARRANTY DOES NOT COVER: • Service trips to i) deliver, pick up, or install or; educate on how to operate the Product; ii) correct wiring or plumbing; or iii) correct unauthorized repairs or installations of the Product; • Damage or failure caused by leaky or broken water pipes, frozen water pipes, restricted drain lines, inadequate or interrupted water supply or inadequate supply of air; • Damage or failure resulting from operating the Product in a corrosive atmosphere or
LIMITED WARRANTY PROCEDURE FOR RESOLVING DISPUTES: EXCEPT WHERE PROHIBITED AT LAW, ALL DISPUTES BETWEEN YOU AND LG ARISING OUT OF OR RELATING IN ANY WAY TO THIS LIMITED WARRANTY OR THE PRODUCT SHALL BE RESOLVED EXCLUSIVELY THROUGH BINDING ARBITRATION, AND NOT IN A COURT OF GENERAL JURISDICTION. EXCEPT WHERE PROHIBITED AT LAW, YOU AND LG BOTH IRREVOCABLY AGREE TO WAIVE THE RIGHT TO A JURY TRIAL AND TO BRING OR PARTICIPATE IN A CLASS ACTION. Definitions.
LIMITED WARRANTY 51 Hearings and Location. If your claim is for $25,000 or less, you may choose to have the arbitration conducted solely (1) on the basis of documents submitted to the arbitrator, (2) through a telephonic hearing, or (3) by an in-person hearing as established by the applicable arbitration rules. If your claim exceeds $25,000, the right to a hearing will be determined by the applicable arbitration rules.
LG Customer Information Center For inquiries or comments, visit www.lg.com or call: 1-800-243-0000 1-888-542-2623 U.S.A. CANADA Register your product Online! www.lg.
