USER GUIDE LG Digital Signage (MONITOR SIGNAGE) Please read this manual carefully before operating your set and retain it for future reference. L15 www.lg.
ENGLISH TABLE OF CONTENTS USING THE MONITOR.............. 3 -- Using the Input List................................... 3 -- Adjusting Aspect Ratio.............................. 3 ENTERTAINMENT..................... 5 -- Using the Network..................................... 5 Connecting to a Network Network Status -- Using the My Media.................................. 7 Connecting USB storage devices Browsing Files IR CODES................................ 31 TO CONTROL MULTIPLE PRODUCTS...............
ENGLISH USING THE MONITOR Using the Input List 1 Press INPUT to access the Input List. 2 Press the navigation buttons to scroll to one of the input mode and press OK. yy yy yy yy yy yy RGB-PC HDMI DVI-D USB Display Port OPS NOTE •• Some input signals may not be supported depending on the model. Adjusting Aspect Ratio Resize the image to view the image at its optimal size by pressing ARC while you are watching monitor set.
ENGLISH yy 16:9 : T his selection will allow you to adjust the picture horizontally, in linear proportion, to fill the entire screen (useful for viewing 4:3 formatted DVDs). yy Just Scan : This Selection will allow you view the picture of best quality without loss of original picture in high resolution image. Note: If there is noise in original Picture, You can see the noise at the edge. yy Set By Program : Depending on the input signal, screen aspect ratio changes to 4:3 or 16:9.
Using the Network To set up the network settings: (Even if your display has already connected automatically, running setup again will not harm anything), Connecting to a wired network Connecting to a Network For wired network connections, connect the display to a local area network (LAN) via the LAN port as shown on the following diagram. Then, set up the network settings. For wireless network connections, connect the Wi-Fi USB module to the USB port. Then, set up the network settings.
Connecting to a wireless network ENGLISH 1 Press SETTINGS to access the main menus. 2 Press the navigation buttons to scroll to NETWORK and press OK. 3 Press the navigation buttons to select Network Setting and press OK. 4 Select Setting from the AP list or Simple setting (WPS-button mode). -Setting from the AP list Select an AP to connect to a wireless network. - Simple setting (WPS-button mode) Press the button on the wireless router that supports PBC to easily connect to the router.
yy Wireless networks can be subject to interference from other devices operating at a frequency of 2.4 GHz (wireless phones, Bluetooth devices, or microwave ovens). There may also be interference from devices with a frequency of 5 GHz, same as other Wi-Fi devices. yy The surrounding wireless environment can cause the wireless network service to run slowly.
ENGLISH Tips for using USB storage devices yy Only a USB storage device is recognizable. yy If the USB storage device is connected through a USB hub, the device is not recognizable. yy A USB storage device using an automatic recognition program may not be recognized. yy A USB storage device which uses its own driver will not be recognized. yy The recognition speed of a USB storage device may depend on each device.
ENGLISH Browsing Files Browse files saved in a USB storage device. 1 Press SETTINGS to access the main menu. 2 Press the search button to scroll to MY MEDIA and press OK. 3 Press the Search button to go to the Movie List, Photo List, Music List, or Content List that you want, and press OK. Supported file format Type Supported file format Movie Video Codec Media Container Profile MPEG1 / MPEG2 DAT, MPG, MPEG, TS, TP 1080P @ 30 fps MPEG4 AVI, DIVX, MP4, MKV, TS, 1080P @ 30 fps (DivX 3.
ENGLISH Type Photo Supported file format JPEG Min : 64 x 64 Max : Normal Type: 15360 (W) x 8640 (H) Progressive Type: 1920 (W) x 1440 (H) BMP Min : 64 x 64 Max : 9600 x 6400 PNG Min : 64 x 64 Max : Interlace: 1200 x 800 Non-Interlace: 9600 x 6400 yy Non-supported files are displayed in the form of predefined icon. Music mp3 [Bit rate] 32 kbps ~ 320 kbps [Sample freq] 16 kHz ~ 48 kHz [Support] MPEG1, MPEG2, Layer2, Layer3 AAC [Bit rate] Free Format [Sample freq.
ENGLISH Viewing Movies Plays movie files saved in the USB storage device. 1 Press SETTINGS to access the main menu. 2 Press the navigation button to scroll to MY MEDIA and press OK. 3 Press the navigation button to scroll to Movie List and press OK. 4 Press the navigation buttons to scroll to a folder you want and press OK. 5 Press the navigation buttons to scroll to a file you want and press OK. yy yy yy yy 6 Change Device : Selects the USB storage device.
Tips for using playing video files ENGLISH yy yy yy yy yy yy yy yy yy yy yy yy yy yy yy yy yy yy yy Some user-created subtitles may not work properly. Some special characters are not supported in subtitles. HTML tags are not supported in subtitles. Subtitles in languages other than the supported languages are not available. The screen may suffer temporary interruptions (image stoppage, faster playback, etc.) when the audio language is changed.
Select Set Video Play to access the following menus: Sync Position Size Repeat Description Selects your desired picture format during movie play. Changes the Language Group of the audio during movie play. Files with a single audio track cannot be selected. Turn on/off the subtitle. Activated for SMI subtitle and can select the language within the subtitle. Can select the font for subtitle. When set to default, same font as general menu will be used.
ENGLISH Viewing Photos View image files saved in the USB storage device. 1 Press SETTINGS to access the main menu. 2 Press the navigation button to scroll to MY MEDIA and press OK. 3 Press the navigation button to scroll to Photo List and press OK. 4 Press the navigation buttons to scroll to a folder you want and press OK. 5 Press the navigation buttons to scroll to a file you want and press OK. yy yy yy yy 6 Change Device : Selects the USB storage device.
Photo options Press SETTINGS to show the Option menus. 2 Press the navigation buttons to scroll to Set Photo View, Set Video, or Set Audio, and press OK. NOTE yy The option values changed in Movie List do not affect Photo List or Music List. Therefore, they are not affected by option values changed in Photo List or Music List. yy The option values changed in Photo List and Music List do affect each other.
ENGLISH Listening to Music Plays music files saved in the USB storage device. 1 Press SETTINGS to access the main menu. 2 Press the navigation button to scroll to MY MEDIA and press OK. 3 Press the navigation button to scroll to Music List and press OK. 4 Press the navigation buttons to scroll to a folder you want and press OK. 5 Press the navigation buttons to scroll to a file you want and press OK. yy yy yy yy yy 6 Change Device : Selects the USB storage device.
yy This unit cannot support the ID3 Tag embedded MP3 files. NOTE yy A damaged or corrupted music file does not play but displays 00:00 in playtime. yy A music downloaded from a paid service with copyright protection does not start but displays inappropriate information in playtime. yy If you press OK, buttons, screen saver is stopped. yy The , , , , buttons on the remote control are also available in this mode.
ENGLISH Viewing the Contents List Plays back the stored files using the Export option in SuperSign Manager. 1 Press SETTINGS to access the main menu. 2 Press the navigation button to scroll to MY MEDIA and press OK. 3 Press the navigation button to scroll to Contents List and press OK. 4 Press the navigation buttons to scroll to a folder you want and press OK. 5 Press the navigation buttons to scroll to a file you want and press OK. yy yy yy yy Change Device : Selects the USB storage device.
Extension Codec .asf .wmv Videos VC-1 Simple and Main Profiles Audio WMA Standard, WMA 10 Professional .divx .avi Videos DivX3.11, DivX4, DivX5, DivX6, XViD, H.264/AVC, Motion Jpeg, MPEG-4 Part2 Audio MPEG-1 Layer I, II, MPEG-1 Layer III (MP3), Dolby Digital, LPCM, ADPCM, DTS .mp4 .m4v .mov Videos H.264/AVC, MPEG-4 Part2 Audio AAC, MPEG-1 Layer III (MP3) .3gp .3g2 Videos H.264/AVC, MPEG-4 Part2 Audio AAC, AMR-NB, AMR-WB .mkv Videos H.264/AVC Audio HE-AAC, Dolby Digital .ts .
ENGLISH CUSTOMIZING SETTINGS Accessing Main Menus 1 Press SETTINGS to access the main menus. 2 Press the navigation buttons to scroll to one of the following menus and press OK. 3 Press the navigation buttons to scroll to the setting or option you want and press OK. 4 When you are finished, press EXIT. When you return to the previous menu, press BACK. yy yy yy yy yy yy PICTURE : Adjusts the image size, quality, or effect. AUDIO : Adjusts the sound quality, effect, or volume level.
1 Press SETTINGS to access the main menus. 2 Press the navigation buttons to scroll to PICTURE and press OK. 3 Press the navigation buttons to scroll to the setting or option you want and press OK. - To return to the previous level, press BACK. 4 When you are finished, press EXIT. When you return to the previous menu, press BACK. The available picture settings are described in the following: Setting Energy Saving Description Reduces power consumption by adjusting peak screen brightness.
ENGLISH Setting Screen (In RGB Mode Only) Description Customizes the PC display options in RGB mode. Option Resolution Selects a proper resolution. Auto Configure Sets to adjust the screen position, clock, and phase automatically. The displayed image may be unstable for a few seconds while the configuration is in progress. Adjusts the options when the picture is not clear, especially when characters are shaky, after the auto configuration. Restores the options to the default setting.
Advanced Control - Picture Mode (Standard/ APS/ Sport/ Game/ Calibration) Description Adjusts the contrast to the optimal level according to the brightness of the image. Dynamic Color Adjusts color for more natural-looking colors. Color Gamut Selects the range of colours that can be expressed. Skin Color Sky Color Skin color spectrum can be separately set to implement the skin color as defined by the user. Sky color is set separately. Grass Color Natural color spectrum (meadows, hills, etc.
ENGLISH AUDIO Settings 1 Press SETTINGS to access the main menus. 2 Press the navigation buttons to scroll to AUDIO and press OK. 3 Press the navigation buttons to scroll to the setting or option you want and press OK. - To return to the previous level, press BACK. 4 When you are finished, press EXIT. When you return to the previous menu, press BACK. The available audio options are described in the following: Setting Sound Mode Sound Effect AV Sync.
1 Press SETTINGS to access the main menus. 2 Press the navigation buttons to scroll to TIME and press OK. 3 Press the navigation buttons to scroll to the setting or option you want and press OK. - To return to the previous level, press BACK. 4 When you are finished, press EXIT. When you return to the previous menu, press BACK. The available time settings are described in the following: Setting Clock Description Sets the time feature.
ENGLISH OPTION Settings 1 Press SETTINGS to access the main menus. 2 Press the navigation buttons to scroll to OPTION and press OK. 3 Press the navigation buttons to scroll to the setting or option you want and press OK. - To return to the previous level, press BACK. 4 When you are finished, press EXIT. When you return to the previous menu, press BACK. The available option settings are described in the following: Setting Language Selects a language for the display text.
Description Creates simple schedules and sets playback using files in My Media. Level Add Schedule Creates a contents schedule. - Media: Select the file to which you want to apply the contents schedule. - Select [Create] to register the contents schedule. Play Plays a contents schedule. Delete All Deletes all registered schedules. NOTE yy Information about registered schedules is stored on your USB storage device. This feature does not work when your USB storage device has been removed.
ENGLISH Tile Mode This monitor can be tiled with additional monitors to create a large tiled display.
1 Press SETTINGS to access the main menus. 2 Press the navigation buttons to scroll to NETWORK and press OK. 3 Press the navigation buttons to scroll to the setting or option you want and press OK. - To return to the previous level, press BACK. 4 When you are finished, press EXIT. When you return to the previous menu, press BACK. The available option settings are described in the following: Setting Network Setting Description Configure the network settings.
ENGLISH PICTURE ID Settings NOTE yy Only applies to certain models. PICTURE ID is used to change the settings of a specific set (display) using a single IR receiver for multi-vision. Communication is possible between a monitor with an IR receiver and other monitors using RS-232C cables. Each monitor is identified by a Set ID. If you assign the PICTURE ID using the remote control, only displays with matching PICTURE ID and Set ID can be controlled remotely.
ENGLISH IR CODES yy All models do not support the HDMI/USB function. yy Some key codes are not supported depending on the model.
ENGLISH Code (Hexa) Function Note 8F R/C BUTTON 8E R/C BUTTON 72 Red Key (PICTURE ID ON) R/C BUTTON 71 Green Key (PICTURE ID OFF) R/C BUTTON 63 Yellow Key R/C BUTTON 61 Blue Key R/C BUTTON
yy Use this method to connect several products to a single PC. You can control several products at a time by connecting them to a single PC. yy In the Option menu, Set ID must be between 1 and 255 (or from 1 to 1,000) without being duplicated. Connecting the Cable Connect the RS-232C cable as shown in the picture. yy The RS-232C protocol is used for communication between the PC and product. You can turn the product on or off, select an input source or adjust the OSD menu from your PC.
ENGLISH Communication Parameter RS-232C Configurations 4P Cable 4-Wire Configurations (Standard RS-232C cable) Set Set TXD RXD GND IR RXD TXD GND IR NOTE •• When using three-wire connections (nonstandard), an IR daisy chain cannot be used. •• If you want to control multiple units simultaneously, use 3.5 mm 4-pole cables (sold separately).
COMMAND 1 DATA (Hexadecimal) 2 01 Power k a 00 to 01 02 Select input x b See [Select input] 03 Aspect ratio k c See [Aspect ratio] 04 Energy saving j q See [Energy saving] 05 Picture mode d x See [Picture mode] 06 Contrast k g 00 to 64 07 Brightness k h 00 to 64 08 Sharpness k k 00 to 32 09 Color k i 00 to 64 10 Tint k j 00 to 64 11 Color temperature x u 00 to 64 12 H position f q 00 to 64 13 V position f r 00 to 64 14 H size f s 00
ENGLISH COMMAND 1 DATA (Hexadecimal) 2 35 Software version f z FF 36 White balance red gain j m 00 to FE 37 White balance green gain j n 00 to FE 38 White balance blue gain j o 00 to FE 39 Backlight m g 00 to 64 40 Screen off k d 00 to 01 41 Tile Mode d d See [Tile Mode] 42 Tile Mode Check d z FF 43 Tile ID d i Refer to ‘Tile ID'.
Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] * [Command1] Identifies the factory setting and the user setting modes. * [Command2] Controls monitors. * [Set ID] Used for selecting a set you want to control. A Set ID can be assigned to each set from 1 to 255 (from 01H to FFH), or from 1 to 1,000 (from 001H to 3e8H) in certain models, under OPTION in the OSD menu. Selecting '00H' or '000H' for Set ID allows the simultaneous control of all connected monitors.
ENGLISH 01. Power (Command: k a) Controls the power on/off of the set. 04. Energy saving (Command: j q) Sets the energy saving function. Transmission Transmission [k][a][ ][Set ID][ ][Data][Cr] Data 00: Off 01: On [j][q][ ][Set ID][ ][Data][Cr] Data Acknowledgement [a][ ][Set ID][ ][OK/NG][Data][x] * Only when the monitor is fully powered on, the acknowledgement signal is returned properly. * There may be a delay between the transmission and acknowledgement signals. 02.
10. Tint (Command: k j) Adjusts the screen tint. Transmission Transmission [k][h][ ][Set ID][ ][Data][Cr] Data 00 to 64: Brightness 0 to 100 [k][j][ ][Set ID][ ][Data][Cr] Data Acknowledgement [h][ ][Set ID][ ][OK/NG][Data][x] [j][ ][Set ID][ ][OK/NG][Data][x] 08. Sharpness (Command: k k) Adjusts the screen sharpness. 11. Color temperature (Command: x u) Adjusts the screen color temperature.
ENGLISH 13. V position (Command: f r) Adjusts the vertical position of the screen. This function is only available when the Tile Mode is set to Off. * The operational range varies depending on the RGB input resolution. (Only available in RGB-PC input mode) Transmission 16. Balance (Command: k t) Adjusts the sound balance.
22. Off time schedule (Command: f c) Enables/disables the on time schedule. Transmission Transmission [k][f ][ ][Set ID][ ][Data][Cr] Data 00 to 64: Volume 0 to 100 [f ][c][ ][Set ID][ ][Data][Cr] Data Acknowledgement Acknowledgement [f ][ ][Set ID][ ][OK/NG][Data][x] 20. Clock 1 (year/month/day) (Command: f a) Adjusts the Clock 1 (year/month/day) value. [c][ ][Set ID][ ][OK/NG][Data][x] 23. On time schedule (Command: f b) Enables/disables the on time schedule.
ENGLISH 24. Off timer (repeat mode/time) (Command: f e) Configures the off time (repeat mode/time) settings. Transmission [f ][e][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr] Data1 1. F1 to F7 (reading data) F1: Read the 1st off timer data F2: Read the 2nd off timer data F3: Read the 3rd off timer data F4: Read the 4th off timer data F5: Read the 5th off timer data F6: Read the 6th off timer data F7: Read the 7th off timer data 2.
28. Auto off (Command: f g) Configures the automatic off settings. Transmission Transmission [f ][u][ ][Set ID][ ][Data1][Cr] [f ][u][ ][Set ID][ ][Data1][Data2][Cr] [f ][g][ ][Set ID][ ][Data][Cr] Data Data (adding schedule) 60: RGB 70: DVI-D 90: HDMI (HDMI1) 91: OPS (DTV) C0: DISPLAYPORT (DTV) Data1 1.
ENGLISH 30. Reset (Command: f k) Resets settings for Picture, Screen and Audio or restores factory settings. (Screen reset can only be performed in RGB input mode.) 33. Time elapsed (Command: d l) Checks the elapsed time.
39. Backlight (Command: m g) Adjusts the back light brightness. Transmission Transmission [j][m][ ][Set ID][ ][Data][Cr] Data 00 to FE: Red gain 0 to 254 [m][g][ ][Set ID][ ][Data][Cr] Data 00 to 64: Back light brightness 0 to 100 Acknowledgement Acknowledgement [m][ ][Set ID][ ][OK/NG][Data][x] [g][][set ID][][OK/NG][Data][x] ** This may not be supported on some models. 37. White balance green gain (Command: j n) Adjusts the white balance green gain value. 40.
ENGLISH 42. Tile Mode Check (Command: d z) To check Tile Mode status. Transmission [d][z][ ][Set ID][ ][Data][Cr] Data FF: Check Tile Mode status. ** It may not be supported depending on the model. Acknowledgement [z][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x] Data1 Data2 Data3 00: Tile Mode Off 01: Tile Mode On 00 to 0F: Tile Row 00 to 0F: Tile Column 43. Tile ID (Command: d i) To set Tile ID.
Transmission [d][j][ ][Set ID][ ][Data][Cr] Data 00: Off 01: On Acknowledgement [j][ ][Set ID][ ][OK/NG][Data][x] ENGLISH 48. Natural Mode (In Tile Mode) (Command : d j) To display the image naturally, the part of the image that would normally be displayed in the gap between the monitors is omitted.
