OWNER'S MANUAL LED LCD Monitor (LED Monitor*) *LG LED Monitors are LCD Monitors with LED Backlighting. Please read this manual carefully before operating your set and retain it for future reference. LED LCD MONITOR MODEL 32MP58HQ www.lg.
TABLE OF CONTENTS ENGLISH CONTENTS 3 LICENSE 28 4 ASSEMBLING AND PREPARING 30 SPECIFICATIONS 31 Preset Modes (Resolution) 4 Unpacking 31 Indicator 6 Parts and buttons 6 - How to Use the Joystick Button 7 - Input Connector 32 PROPER POSTURE 8 Moving and Lifting the Monitor 32 Proper posture for using the Monitor set.
LICENSE 3 ENG ENGLISH LICENSE Each model has different licenses. Visit www.lg.com for more information on the license. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.
ASSEMBLING AND PREPARING ASSEMBLING AND PREPARING ENGLISH ENG Unpacking Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and accessories. D-SUB Cable CD(Owner's Manual) / ( This cable is not included in all Card countries.
ASSEMBLING AND PREPARING 5 CAUTION NOTE The accessories supplied with your product may vary depending on the model. yy Product specifications or contents in this manual may be changed without prior notice due to upgrade yy of product functions. ENG ENGLISH Do not use any unapproved accessories to ensure the safety and product life span. yy Any damages or injuries by using unapproved accessories are not covered by the warranty.
ASSEMBLING AND PREPARING Parts and buttons ENGLISH ENG Joystick Button/ Power Indicator yyOn: power is on yyOff: power is off How to Use the Joystick Button You can easily control the functions of the monitor by pressing the joystick button or moving it left/right with your finger. Basic Functions ◄/► Power on Press the joystick button once with your finger to turn on the monitor. Power off Press and hold the joystick button once with your finger to turn off the monitor.
ASSEMBLING AND PREPARING 7 Parts and buttons ENG ENGLISH Input Connector
ASSEMBLING AND PREPARING Moving and Lifting the Monitor ENGLISH ENG When moving or lifting the monitor, follow these instructions to prevent the monitor from being scratched or damaged and to ensure safe transportation regardless of its shape or size. It is advisable to place the monitor in the yy original box or packing material before attempting to move it. Before moving or lifting the monitor, disconyy nect the power cord and all cables. Hold the top and bottom of the monitor frame yy firmly.
ASSEMBLING AND PREPARING 9 Setting up the Monitor set 1 1 Please put a soft cloth on a low table or box to protect the screen of the monitor. 3 1 Please push the Stand Base in the direction of the arrow as shown below and assemble together. Stand Base 2 Please put the monitor on the soft cloth with the screen facing down. 2 Please use a driver(-) or coin to insert thumb screw and turn right arrow direction lock.
ASSEMBLING AND PREPARING Detaching the Stand Base ENGLISH ENG 1 Please remove the cable installed to the monitor. 2 2 Please pull the Stand Base in the direction of the arrow as shown below and disassemble as shown below. 1 Please put a soft cloth on a low table or box to protect the screen of the monitor. 4 After fixing the monitor in one hand, remove the Stand body by pulling it strongly in the direction of the arrow as shown below.
ASSEMBLING AND PREPARING CAUTION Mounting on a table 1 Lift and tilt the Monitor set into its upright position on a table. Leave a 100 mm space from the wall for proper ventilation. 100 mm 100 mm 100 mm 100 mm 2 Connect the AC-DC Adapter and Power Cord to a wall outlet. or ENG ENGLISH yyIllustrations in this document represent typical procedures, so they may look different from the actual product. yyDo not carry the monitor upside down by just holding the stand base.
ASSEMBLING AND PREPARING 3 Press the joystick button on the bottom of the ENGLISH ENG monitor to turn on the monitor. WARNING When you adjust the angle, do not hold the bottom of the Monitor set frame as shown on the following illustration, as may injure your fingers. CAUTION Unplug the power cord before moving the Monitor to another location. Otherwise electric shock may occur. Using the cable holder Do not touch or press the screen when adjusting the angle of the monitor.
ASSEMBLING AND PREPARING 13 Installing the wall mount NOTE 1 Place the screen face down. To protect the screen from scratches, cover the surface with a soft cloth. 2 Detach the screw cover as below. 3 Remove the screws and separate the stand hinge. Front Rear Using the Kensington security system The Kensington security system connector is located at the back of the Monitor set.
ASSEMBLING AND PREPARING Wall Mount (A X B) yy Mounting on a wall ENGLISH ENG For proper ventilation, allow a clearance of 100 mm on each side and from the wall. Detailed instructions are available from your dealer, see the optional Tilt Wall Mounting Bracket Installation and Setup Guide. 100 mm 100 mm 100 mm 100 mm CAUTION Disconnect the power cord first, and then yy move or install the Monitor set. Otherwise electric shock may occur.
USING THE MONITOR SET 15 USING THE MONITOR SET Your Monitor set supports Plug & Play*. yy *Plug & Play: A PC recognizes a connected device that users connect to a PC and turn on, without device configuration or user intervention. HDMI connection Transmits the digital video and audio signals from your PC to the Monitor set. Connect the PC and the Monitor set with the HDMI cable as shown in the following illustrations. D-SUB connection Transmits analog video from your PC to the Monitor set.
USING THE MONITOR SET CAUTION ENGLISH Connect the signal input cable yy and tighten it by turning the screws clockwise. Do not press the screen with yy your finger for a long time as this may result in temporary distortion on the screen. Avoid displaying a fixed image on the yy screen for a long period of time to prevent image burn. Use a screensaver if possible. Connecting to AV Devices HDMI connection Transmits the digital video and audio signals from your AV devices to the monitor.
USING THE MONITOR SET 17 Connecting to External Devices Connect peripheral devices to the monitor using headphone ports. (sold separately) NOTE Peripheral devices are sold separately. yy Cables with angled plugs may have clearyy ance issues, use straight plugs when possible. Angle Type Straight Type NOTE Headphones or speakers may not work noryy mally, depending on the server PC settings.
CUSTOMIZING SETTINGS CUSTOMIZING SETTINGS Activating the Main Menu ENGLISH ENG 1 Press the joystick button on the bottom of the monitor. 2 Move the joystick up/down (▲/▼) and left/right(◄/►) to 3 Power Indicator set the options. Press the joystick button once more to exit the main menu. Button Joystick Button Menu Status Description Main menu disabled Enables the main menu. Main menu enabled Exits the main menu.
CUSTOMIZING SETTINGS 19 Customizing settings ENG ENGLISH Menu Settings -Quick Settings 1 To view the OSD menu, press the joystick button at the bottom of the monitor and then enter the Menu. Go to Quick Settings > Brightness by moving the joystick. 2 3 Configure the options following the instructions that appear in the 4 5 bottom right corner. To return to the upper menu or set other menu items, move the joystick to ◄ or pressing ( / OK) it.
CUSTOMIZING SETTINGS NOTE ENGLISH ENG Saving Data depends on the Panel. So,those values should be different from each panel and panel yy vendor.If option of SMART ENERGY SAVING is High or Low, monitor luminance become higher or lower depend on source.
CUSTOMIZING SETTINGS 21 -Picture ENG ENGLISH 1 To view the OSD menu, press the joystick button at the bottom of the monitor and then enter the Menu. Go to Picture by moving the joystick. 2 3 Configure the options following the instructions that 4 5 Color Adjust appear in the bottom right corner. To return to the upper menu or set other menu items, move the joystick to ◄ or pressing ( / OK) it. If you want to exit the OSD menu, move the joystick to ◄ until you exit.
CUSTOMIZING SETTINGS Picture Adjust ENGLISH ENG SUPER RESOLUTION+ High Optimized picture quality is displayed when a user wants crystal clear images. It is effective forhigh quality video or game. Middle The optimized picture quality is displayed when a user wants images between low and highmodes for comfortable viewing. It is effective for UCC or SD video. Low The optimized picture quality is displayed when a user wants smooth and natural images.
CUSTOMIZING SETTINGS Color Adjust 23 The higher the gamma value, the darker the image becomes. Likewise, the lower the gamma value, the lighter the image becomes. If you do not need to adjust the gamma settings, select Off. Color Temp Selects the factory default picture color. Warm: Sets the screen color to a reddish tone. Medium: Sets the screen color between a red and blue tone. Cool: Sets the screen color to a bluish tone.
CUSTOMIZING SETTINGS -General ENGLISH ENG 1 To view the OSD menu, press the joystick but- ton at the bottom of the monitor and then enter the Menu. Go to General by moving the joystick. 2 Color Adjust 3 Configure the options following the instructions that appear in the bottom right corner. 4 To return to the upper menu or set other menu items, move the joystick to ◄ or pressing ( / OK) it. 5 If you want to exit the OSD menu, move the joystick to ◄ until you exit.
CUSTOMIZING SETTINGS 25 -Auto Configuration bottom of the monitor and then enter the Menu. 2 Go to Auto Configuration by moving the joystick. 3 Configure the options following the instructions that appear in the 4 5 bottom right corner. To return to the upper menu or set other menu items, move the joystick to ◄ or pressing ( / OK) it. If you want to exit the OSD menu, move the joystick to ◄ until you exit. Each option is described below.
CUSTOMIZING SETTINGS -Reset ENGLISH ENG 1 To view the OSD menu, press the joystick but- ton at the bottom of the monitor and then enter the Menu. Go to Reset by moving the joystick. 2 3 Configure the options following the instructions that 4 5 appear in the bottom right corner. To return to the upper menu or set other menu items, move the joystick to ◄ or pressing ( / OK) it. If you want to exit the OSD menu, move the joystick to ◄ until you exit. Each option is described below.
CUSTOMIZING SETTINGS 27 -Picture Mode bottom. Each option is described below. Joystick Button > Picture Mode Picture Mode Description Custom Allows the user to adjust each element. The color mode of the main menu can be adjusted. Reader 1 It is a mode that the screen is adjusted to the best for the newspaper. If you want screen more bright, you can control brightness in Menu OSD. Reader 2 It is a mode that the screen is adjusted to the best for the cartoon.
TROUBLESHOOTING ENGLISH ENG TROUBLESHOOTING Check the following before calling for service. No image appears Is the power cord of the display connected? Is the power indicator light on? Is the power indicator flickering? Do you see an "OUT OF RANGE" message on the screen? Do you see a "NO SIGNAL" message on the screen? yy Check and see if the power cord is connected properly to the power outlet. yy Press the Power button.
TROUBLESHOOTING 29 CAUTION Display image is incorrect The screen color is mono or abnormal. yy Check if the signal cable is properly connected and use a screwdriver to fasten if necessary. yy Make sure the video card is properly inserted in the slot. yy Set the color setting higher than 24 bits (true color) at Control Panel ► Settings. The screen blinks. yy Check if the screen is set to interlace mode and if yes, change it to the recommend resolution.
SPECIFICATIONS ENGLISH ENG SPECIFICATIONS 32MP58HQ Display Resolution Power Consumption Power Input AC-DC Adapter Screen Type Pixel Pitch Flat Panel Active matrix-TFT LCD Anti-Glare coating 0.36375 mm x 0.36375 mm (Pixel Pitch) Max 1920 x 1080 @ 60 Hz Recommend VESA 1920 x 1080 @ 60 Hz On Mode : 24.4 W Typ. (ENERGY STAR® standard) * 34.9 W Typ. (Outgoing condition) ** Sleep Mode ≤ 0.3 W Off Mode ≤ 0.3 W 19 V 2.0 A or 19 V 1.
SPECIFICATIONS 31 Preset Modes (Resolution) ENG ENGLISH D-SUB/HDMI PC Timing Display Modes (Resolution) Horizontal Frequency(kHz) Vertical Frequency(Hz) Polarity(H/V) 640 x 480 31.469 60 -/- 800 x 600 37.879 60 +/+ 1024 x 768 48.363 60 -/- 1280 x 1024 63.981 60 +/+ 1680 x 1050 65.290 60 -/+ 1920 x 1080 67.5 60 +/+ Recommend Mode HDMI Timing(Video) Factory support mode (Preset Mode) Horizontal Frequency(kHz) Vertical Frequency(Hz) 480P 31.50 60 O 576P 31.
PROPER POSTURE ENGLISH ENG PROPER POSTURE Proper posture for using the Monitor set. Adjust the Monitor set and your posture to allow you to view images at the optimal viewing angle. Place your hands gently on the keyboard, keeping your arms bent at the elbows and horizontally outright. Adjust the location of the Monitor set to avoid it reflecting light.
Make sure to read the Safety Precautions before using the product. Keep the Owner’s Manual (CD) in an accessible place for future reference. The model and serial number of the SET is located on the back and one side of the SET. Record it below should you ever need service. MODEL SERIAL ENERGY STAR® is a set of power-saving guidelines issued by the U.S.Environmental Protection Agency (EPA). As an ENERGY STAR® Partner LGE U. S. A., Inc.
