LCD TV OWNER’S MANUAL MODEL: 26LZ5RV 27LZ5RV Please read Information Manual included together before reading this manual and operating your set. Retain it for future reference. Record model number and serial number of the set. See the label attached on the back cover and quote this information to your dealer when you require service.
Accessories RE Ensure that the following accessories are included with your TV. If any accessory is missing, please contact the dealer from where you purchased the product.
ENGLISH Contents Introduction 2 5 6 7 Accessories Controls Connection Options Remote Control Installation 10 11 11 12 13 14 15 16 17 Basic Connection External Equipment Connections Antenna Connection VCR Setup External AV Source Setup External DVD Setup DVD Output Setup PC Setup Power Cord Connection TV 18 18 18 18 19 Turning On/Off the TV Volume Adjustment Programme selection On screen language selection How to adjust the OSD sreen Setting up TV stations 20 21 22 23 24 24 Auto programme tuning M
Contents Teletext 36 36 36 37 37 Switch on/off SIMPLE text TOP text (option) FASTEXT Special teletext functions 38 40 40 40 41 41 42 42 42 43 43 44 44 45 45 46 46 46 47 Notes on Discs Language Menu Language Disc Audio / Disc Subtitle / Disc Menu Display Progressive Scan Audio Dolby Digital / DTS / MPEG Sample Freq.
ENGLISH Introduction Controls - This is a simplified representation of front panel. - Here shown may be somewhat different from your TV. Programme (D Buttons PR Volume (F / Buttons VOL / E) G) OK Button OK MENU Button MENU TVvAV/PC Button TV DVD / CD PLAYER Remote Control Sensor P S SC KIP AN / AY S SC KIP AN / PL ST O O C PE LO N SE / AV/PC ON/OFF Button r) Power/Standby Indicator (r • illuminates red in standby mode. • illuminates green when the set is switched on.
Introduction Connection Options 480i/576i S-Video Input Component Input (Y,PB,PR) Audio Input RS-232C 2 AC Input DVI (PC) Input Euro Scart Socket (AV1) Euro Scart Socket (AV2) Remote Control Port PC Sound Input RS-232C port VIDEO DIGITAL SOUND OUT DVD Output (Video) DVD Output (Audio) 6 OPTICAL (Digital Sound Output) Antenna Input
ENGLISH Remote Control POWER Switches the set On from standby or Off to standby. OPEN/CLOSE POWER TV/AV LIST EDIA MULTIM TEXT AUDIO I/II SSM PSM 1 PLAY PAUSE/STEP REP EAT STOP SCAN SCAN SKIP MENU OPEN/CLOSE Opens or closes the disc tray. SKIP ARC TV/AV • Selects: TV, AV1, AV2, S-video, DVD, Component, or PC mode. • Clears the menu from the screen. • Switches the set On from standby. MULTIMEDIA • Selects: TV, DVD, Component, or PC mode. • Clears the menu from the screen.
Introduction Remote Control OPEN/CLOSE POWER TV/AV ARC Selects your desired picture format. (Refer to p.26) LIST EDIA MULTIM TEXT AUDIO I/II SSM PSM MENU Selects a menu. EXIT Exits from each mode. PLAY PAUSE/STEP REP STOP EAT D / E / F / G (up / down / left / right) Selects or adjusts an item in the menu. SCAN SCAN SKIP SKIP ARC MENU EXIT OK Accepts your selection or displays the current mode. DISC MENU Accesses menu on a DVD disc. (Refer to p.
ENGLISH 1 2 3 4 5 6 7 8 9 SLEEP 0 CLEAR A-B RANDOM A-B Repeat sequence. (Refer to p.52) RANDOM Plays chapters or tracks in random order. (Refer to p.52) ANGLE Selects a DVD camera angle if available. (Refer to p.52) ANGLE SUB_T MARKER SEARCH PROGRAM ZOOM MIX TIME REVEAL MODE ? UPDATE SIZE HOLD M INDEX i SUB_T (SUBTITLE) Selects a subtitle language. (Refer to p.53) MARKER Marks any point during playback. (Refer to p.53) SEARCH Displays MARKER SEARCH menu. (Refer to p.
Installation Basic Connection 1 Pull the back cover backside while pushing the two tabs and then lift it up. 2 Connect the cables as necessary. To connect an additional equipment, see the External equipment Connections section. 3 Align the holes on the TV back panel with the protuberances on the rear back cover and insert. - Cable Arranagement Pull the cables through the hole on the set and bundle the cables using the supplied twister holder.
ENGLISH External Equipment Connections To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment. Antenna Connection - For optimum picture quality, adjust antenna direction. - An antenna cable and converter are not supplied. Multi-family Dwellings/Apartments (Connect to wall antenna socket) Wall Antenna Socket RF Coaxial Wire (75 ohm) VHF Antenna Turn clockwise to tighten.
Installation External Equipment Connections VCR Setup - To avoid picture noise (interference), leave an adequate distance between the VCR and TV. - Typically a frozen still picture from a VCR. If the 4:3 picture format is used; the fixed images on the sides of the screen may remain visible on the screen. When connecting with an antenna cable 1 Connect the ANT OUT socket of the VCR to the ANT IN socket on the set. 2 Connect the antenna cable to the ANT IN socket of the VCR.
ENGLISH When connecting with an S-Video cable 1 Connect the S-VIDEO output of the VCR to the SVIDEO input on the set. The picture quality is improved; compared to connecting a regular VCR to the Video input. 2 Connect the AUDIO jacks between TV and VCR. 3 Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.) 4 Select S-video input source with using the TV/AV button on the remote control.
Installation External Equipment Connections External DVD Setup When connecting with a component cable 1 Connect the video outputs (Y, PB, PR) of the DVD to the COMPONENT DVD IN (Y, PB, PR) jacks on the set. 2 Connect the audio outputs of the DVD to the AUDIO input jacks on the set. 3 Turn on the DVD player, insert a DVD. 4 Select Component input source with using the TV/AV button on the remote control. 5 Refer to the DVD player's manual for operating instructions.
ENGLISH When connecting with a S-Video cable 480i/576i TV side panel 1 Connect the S-VIDEO output of the DVD to the S-VIDEO input on the set. 2 Connect the audio outputs of the DVD to the AUDIO input jacks on the set. 3 Turn on the DVD player, insert a DVD. 4 Select S-video input source with using the TV/AV button on the remote control. 5 Refer to the DVD player's manual for operating instructions.
Installation External Equipment Connections PC Setup 1 Connect the TV to the PC with the PC cable. 2 Connect the PC audio output to the TV's PC SOUND input. 3 Turn on the PC. 4 Use the TV/AV button on the remote control to select PC. NOTE Connect the signal cable (DVI-D cable, Not DVI to D-Sub cable) from the DVI output socket of the PC to the DVI input socket of the set when using a PC with DVI output. In some video cards, DVI-Analog output may not be supported.
ENGLISH Note a. For optimum picture quality, use standard WXGA 1280x768 (26LZ5RV) / 1360x768 (27LZ5RV) computer output at a 60Hz refresh rate. Using other formats (VGA, SVGA, etc.) or refresh rates may result in reduced picture quality. (To change the computer video output format, please refer to the operating manual for the computer you are using). b. If the message Out of range appears on the screen, adjust the PC output to a format listed in the Monitor Display Specifications table. c.
Operation Basic Operation Turning On/Off the TV 1 OPEN/CLOSE POWER TV/AV LIST EDIA MULTIM PSM PLAY PAUSE/STEP REP STOP EAT SCAN SCAN SKIP 2 SKIP ARC MENU • In the standby mode, press the POWER, PR D / E, TV/AV, MULTIMEDIA or number buttons on the remote control to turn on the TV. TEXT AUDIO I/II SSM First, make all equipment connections. Connect the AC power cord into the TV, then plug the power cord into a wall outlet. Press the POWER button located on the TV to turn on the TV.
ENGLISH How to adjust the OSD screen 1 Press the MENU button and then D / E button to display each menu. 2 Press the G button and then D / E button to select a menu item. 3 Change the setting of an item in the sub or pull-down menu with F / G button. You can move to the higher level menu by pressing the OK or MENU button.
Setting up TV stations Up to 100 TV stations can be stored by programme numbers (0 to 99). Once you have preset the stations, you will be able to use the D / E or NUMBER buttons to scan the stations you have programmed. Stations can be tuned using automatic or manual modes.
ENGLISH Manual programme tuning Auto programme Manual programme Programme edit Favourite programme DE F G Manual programme Manual programme Channel OK MENU Storage System Channel Search Name DE F G 29 Storage System Channel Search Name OK MENU - Manual programme lets you manually tune and arrange the stations in whatever order you desire. DE F G GGG OK MENU 1 Press the MENU button and then D / E button to select the Channel menu.
Setting up TV stations Assigning a station name Channel Manual programme Auto programme Manual programme Programme edit Favourite programme DE F G Storage System Channel Search Name OK MENU DE F G - You can assign a station name with five characters to each programme number. C 01 OK MENU 1 Press the MENU button and then D / E button to select the Channel menu. 2 Press the G button and then D / E button to select Manual programme. 3 Press the G button and then D / E button to select Name.
ENGLISH Programme edit Channel Auto programme Manual programme Programme edit Favourite programme DE F G 0 C 03 1 BLN 03 2 C 12 3 S 66 4 S 67 5 6 7 8 9 Delete Move Copy Skip S 69 S 17 ------------- OK MENU - This function enables you to delete or skip the stored programmes. Also you can move some stations to other programme numbers or insert a blank station data into the selected programme number. 1 Press the MENU button and then D / E button to select the Channel menu.
Setting up TV stations Favourite programme Channel Favourite programme Auto programme Manual programme Programme edit Favourite programme DE F G On --------- DE F G OK MENU - This function lets you select your favourite programmes directly. - Repeatedly press the Q.VIEW button to select stored favourite programmes. DISC MEN U VOL ETU DIS PL AY R TIT LE RN PR Q.VIEW Q.VIEW MUTE --------------------------------OK MENU 1 Press the MENU button and then D / E button to select the Channel menu.
ENGLISH Picture adjustment PSM (Picture Status Memory) Picture Picture PSM Contrast Brightness Colour Sharpness PSM Contrast Brightness Colour Sharpness OK MENU DE F G DE F G - You can also recall a desired picture (Dynamic, Standard, Mild, Game or User) with PSM button on the remote control. The picture Dynamic, Standard, Mild and Game are programmed for optimum picture reproduction at the factory and cannot be changed.
Picture adjustment Picture format (ARC) OPEN/CLOSE POWER TV/AV LIST EDIA MULTIM TEXT AUDIO I/II SSM PSM PLAY PAUSE/STEP REP EAT STOP SCAN SCAN SKIP SKIP ARC ARC MENU EXIT OK DISC ME NU ETU DIS PL AY R TIT LE VOL MUTE PR Q.VIEW 1 2 3 4 5 6 7 8 9 SLEEP 0 CLEAR A-B RANDOM RN - You can watch TV in various picture formats; 16:9, 14:9, Zoom, Spectacle, Original, 4:3. Repeatedly press the ARC button to select your desired picture format.
ENGLISH Sound adjustment If you enter the SSM button after making appropriate adjustment on the User sub menu, the display User automatically appears even though you have already set a factory preset setting; Flat, Music, Movie or Speech. SSM (Sound Status Memory) Sound Sound SSM AVL Balance DE F G SSM AVL Balance DE F G OK MENU - You can also recall a desired sound setting (Flat, Music, Movie, Speech or User) with SSM button on the remote control.
Sound adjustment AVL (Auto Volume Leveler) Sound Sound SSM AVL Balance SSM AVL Balance DE F G OK MENU - AVL (Auto Volume Leveler) maintains an equal volume level automatically even if the programme is changed. DE F G On Off OK MENU 1 Press the MENU button and then D / E button to select the Sound menu. 2 Press the G button and then D / E button to select AVL. 3 Press the G button and then use the D / E button to select On or Off. 4 Press the OK button to save.
ENGLISH I/II A Stereo/Dual reception When a programme is selected, the sound information for the station appears after the programme number and station name disappear. OPEN/CLOSE POWER TV/AV LIST EDIA MULTIM AUDIO I/II SSM PSM I/II PLAY PAUSE/STEP REP EAT STOP SCAN SCAN SKIP SKIP ARC MENU EXIT OK DISC ME NU ETU DIS PL AY R TIT LE VOL MUTE 2 3 4 5 6 7 8 9 SLEEP 0 CLEAR RANDOM RN PR Q.
T ime menu Time Time Time Time Off time On time Auto off DE F G OK MENU - You must set the time correctly before using on/off time function. Time Off time On time Auto off DE F G -i-i:i-i- OK MENU 1 Press the MENU button and then D / E button to select the TIME menu. 2 Press the G button and then D / E button to select TIME. 3 Press the G button and then D / E button to adjust the hour. 4 Press the G button and then D / E button to adjust the minute. 5 Press the OK button to save.
ENGLISH Auto off Time Time Time Off time On time Auto off Time Off time On time Auto off OK MENU DE F G DE F G - If you select On on the Auto off menu, the set will automatically switch itself to standby mode approximately ten minutes after a TV station stops broadcasting. - In the Component, DVD, or PC mode, Auto off is not available. On Off OK MENU 1 Press the MENU button and then D / E button to select the TIME menu. 2 Press the G button and then D / E button to select Auto off.
Setup menu Input source Setup Setup Language Input Child lock Set ID DE F G OK MENU - Inputs can be set for TV, AV, DVD or PC mode. AV mode is used when a video cassette recorder (VCR), or other equipment is connected to the set. - Alternatively you can select the TV or AV mode by pressing the TV/AV button. Language Input Child lock Set ID DE F G TV AV1 AV2 S-video DVD Component PC OK MENU 1 Press the MENU button and then D / E button to select the Setup menu.
ENGLISH Child lock Setup Setup Language Input Child lock Set ID DE F G OK MENU - The TV can be set so that the remote control handset is needed to control it. This feature can be used to prevent unauthorized viewing. - With the lock on, the display Child lock appears on the screen if any button on the side panel is pressed while viewing the TV. Language Input Child lock Set ID DE F G On Off OK MENU 1 Press the MENU button and then D / E button to select the Setup menu.
PC menu After setup, be sure to select PC source to see the PC image the on TV screen. Auto Configure PC PC H-Position V-Position Clock Phase Auto Configure Reset H-Position V-Position Clock Phase Auto Configure Reset DE F G OK MENU - Automatically adjusts the screen position, clock, and phase. (The displayed image will disappear for a few seconds while Auto-configuration is in progress.) DE F G To Set OK MENU 1 Press the MENU button and then use the D / E button to select the PC menu.
ENGLISH Clock / Phase PC PC H-Position V-Position Clock Phase Auto Configure Reset H-Position V-Position Clock Phase Auto Configure Reset DE F G OK MENU • Clock This function is to minimize any vertical bars or stripes visible on the screen background. And the horizontal screen size will also change. • Phase This function allows you to remove any horizontal noise and clear or sharpen the image of characters.
Teletext Teletext (or TOP text) is an optional function, therefore only a set with the teletext system can receive the teletext broadcast. Teletext is a free service broadcast by most TV stations which gives up-to-the-minute information on news, weather, television programmes, share prices and many other topics. The teletext decoder of this TV can support the SIMPLE, TOP and FASTEXT systems.
ENGLISH FASTEXT The teletext pages are colour coded along the bottom of the screen and are selected by pressing the corresponding coloured button. A Page selection i button to select the index page. 1. Press the 2. You can select the pages which are colour coded along the bottom line with the same coloured buttons. 3. Corresponding to the SIMPLE teletext mode, you can select a page by entering its three digit page number with the NUMBER buttons in FASTEXT mode. 4.
DVD operation Notes on Discs Symbol Used in this Manual DVD-V VCD On storing discs v Do not store discs in a place subject to direct sunlight or near heat sources. v Do not store discs in places subject to moisture and dust such as a bathroom or near a humidifier. v Store discs vertically in a case. Stacking or placing objects on discs outside of their case may cause warping.
ENGLISH Types of Playable Discs • DVD (8 cm / 12 cm disc) • Video CD (VCD) (8 cm / 12 cm disc) • Audio CD (8 cm / 12 cm disc) In addition, this unit plays DivX file, DVD -R, DVD +R, DVD -RW, DVD +RW, Kodak Picture CDs, SVCD, and CD-R / CD-RW that contains audio titles, MP3, WMA, and/or JPEG files.
DVD operation DVD Menu options - LANGUAGE By using the DVD menu, you can make various adjustments to items such as picture and sound. You can also set a language for the subtitles and the DVD menu, among other things. Menu Language LANGUAGE Menu MenuLanguage Language G Disc Audio Disc Subtitle Disc Menu F Prev. - Select your preferred language for the DVD menus and on screen displays messages.
ENGLISH DVD Menu options - DISPLAY Progressive Scan DISPLAY - Progressive Scan Video provides the highest quality pictures with less flickering. Set Progressive Scan to On. Progressive ProgressiveScan Scan G F Prev. D E On Off Move G Select 1 Press the MENU button twice and then use the D / E button to select DISPLAY. 2 Press the G button to select Progressive Scan. 3 Press the G button and then use D / E button to select On or Off. 4 Press the OK button. 5 Press the EXIT button to exit the menu.
DVD operation DVD Menu options - AUDIO Each DVD disc has a variety of audio output options. Set the player’s AUDIO options according to the type of audio system you use. Dolby Digital / DTS / MPEG DVD-V DivX AUDIO Dolby Digital G DTS Bitstream PCM MPEG Sample Freq. DRC Vocal F Prev. • Bitstream: Select Bitstream if you connect the DVD Player’s DIGITAL OUT jack to an amplifier or other equipment with a Dolby Digital, DTS or MPEG decoder.
ENGLISH DRC (Dynamic Range Control) DVD-V DivX AUDIO Dolby Digital DTS MPEG Sample Freq. DRC G Vocal F Prev. - With the DVD format, you can hear a program’s soundtrack in the most accurate and realistic presentation possible, thanks to digital audio technology. However, you may wish to compress the dynamic range of the audio output (the difference between the loudest sounds and the quietest ones). This allows you to listen to a movie at a lower volume without losing clarity of sound.
DVD operation DVD Menu options - LOCK Rating LOCK Rating LOCK G Password Area Code F Prev. DVD-V D E Unlock 8 (Adult) 7 6 5 4 3 2 1 (Kids) Move G Rating Area Code Select - Some movies contain scenes that may not be suitable for children to view. Many of these discs contain parental control information that applies to the complete disc or to certain scenes on the disc. Movies and scenes are rated from 1 to 8, depending on the country. Some discs offer more suitable scenes as an alternative.
ENGLISH Password (Security Code) LOCK LOCK Rating Rating Password G Password Change F Prev. New Password Area Code Area Code D E G Move CLEAR Select OK F Clear Delete 0-9 Input 1 Press the MENU button twice and then use the D - You can enter or change password. / E button to select LOCK. 2 Press the G button and then use D / E button to select Password. 3 Press the G and OK button. In case of “New” Input a 4-digit password and press OK button.
DVD operation DVD Menu options - OTHERS PBC VCD OTHERS PBC G Auto Play On Off DivX(R) VOD F Prev. - Set Playback Control (PBC) to On or Off. On: Video CDs with PBC are played according to the PBC. Off: Video CDs with PBC are played the same way as Audio CDs. D E Move G Select 1 Press the MENU button twice and then use the D / E button to select OTHERS. 2 Press the G button and then use D / E button to select PBC. 3 Press the G button and then use D / E button to select On or Off.
ENGLISH DivX(R) VOD Div-X OTHERS PBC DivX(R) Video on demand Auto Play DivX(R) VOD G Your registration code is : XXXXXXXX Select To lern more visit www.divx.com.vod (Done) F Prev. D E Move G Select - You can show the DivX DRM (Digital Right Management) Registration code for your unit only. The Registration code is used for VOD (Video-On-Demand) service agent. You can purchase or rental an encrypt movie file. 1 Press the MENU button twice and then use the D / E button to select OTHERS.
DVD operation Playing a DVD or V ideo CD Basic Playback OPEN/CLOSE POWER TV/AV MULTIM LIST EDIA TEXT AUDIO SSM I/II PLAY PAUSE/STEP REP EAT PSM STOP SCAN SCAN SKIP ARC MENU EXIT VCD DivX 1 Press the POWER button to turn the unit on. 2 Press OPEN/CLOSE button to open the disc tray and load your chosen disc in the tray, with the playback side down. 3 Press OPEN/CLOSE button to close the tray. Playback starts automatically. If playback does not start, press G PLAY button.
ENGLISH Slow Motion DVD-V VCD DivX II PAUSE/STEP button on the remote control during playback. 1 Press The DVD player will now go into PAUSE mode. OPEN/CLOSE POWER TV/AV MULTIM LIST EDIA TEXT AUDIO SSM I/II PLAY PAUSE/STEP REP EAT PSM STOP SCAN SCAN SKIP 1/8, F I 1/4, or F I 1/2 (backward), or I G 1/16, I G 1/8, I G 1/4, or I G 1/2 (forward). With a DivX Disc and Video CD, the Slow speed changes: I G 1/16, I G 1/8, I G 1/4 or I G 1/2 (forward).
DVD operation Playing a DVD or V ideo CD Disc Menu OPEN/CLOSE POWER TV/AV LIST EDIA MULTIM 1 Press the DISC MENU button during playback. 2 Use the D / E / F / G button or OK button to select the desired menu option. TEXT AUDIO SSM I/II PAUS E/STEP RE PLAY PEAT PSM STOP SCAN SCAN SKIP Title Menu EXIT Note OK a. DISC ME NU ETU DIS PL AY R TIT LE VOL MUTE 2 3 4 5 6 7 8 9 SLEEP 0 CLEAR RANDOM RN PR Q.
ENGLISH On-Screen Display OPEN/CLOSE POWER TV/AV LIST EDIA MULTIM TEXT AUDIO SSM I/II PLAY PAUSE/STEP REP EAT PSM STOP SCAN SCAN SKIP appropriate (e.g. inputting the title number). For some functions, press OK to execute the setting. Some discs may not provide all of the features shown below. SKIP ARC MENU 1 Press DISPLAY button during playback. 2 Use D / E button to select an item. 3 Press F / G button to change the setting.
DVD operation Playing a DVD or V ideo CD A-B Repeat Playback OPEN/CLOSE POWER TV/AV LIST EDIA MULTIM TEXT AUDIO SSM I/II PAUS E/STEP RE PLAY PEAT PSM STOP SCAN SCAN SKIP VCD DivX - A-B repeat playback allows you to repeat material between two selected points. Press the A-B button to select the start point during playback. “ A * ” is dis1 played on the TV screen and the starting point of your selected segment is set up. the A-B button again to select the end point.
ENGLISH Subtitles OPEN/CLOSE POWER TV/AV LIST EDIA MULTIM TEXT PSM SCAN SCAN SKIP guages. If a subtitle language is selected, the selected subtitle language is played whenever you start a new disc playback. (The disc must contain the selected language) MENU Note a. The subtitle file of the DivX file is displayed only smi, srt and sub. b. If there is no information or there is a code that can not read in the DivX file, “ 1 ” etc are displayed.
DVD operation Playing an Audio CD or MP3/WMA Disc - The DVD player can play MP3/WMA formatted recordings on CD-ROM, CD-R, or CD-RW discs. A Audio CD A CD 1. Once you insert an audio CD a menu appears on the TV screen. 2. Press D / E button to select a track then press G PLAY or OK button. Playback starts. MP3 / WMA WMA 1. Press D / E button to select a folder, and press OK button to see the folder contents. 2. Press D / E button to select a track then press G PLAY or OK button. Playback starts.
ENGLISH Repeat Playback CD MP3 WMA - You can play a track/all on a disc. 1 Press the GIF REPEAT button during playback. 2 Each time you press the GIF REPEAT button, the repeat mode changes as follows. Track → All → (Off) • If you press GGI SKIP button once during repeat track playback, the repeat playback cancels. A-B Repeat Playback CD - A-B repeat playback allows you to repeat material between two selected points. 1 Press the A-B button to select the start point during playback.
DVD operation Programmed Playback - The program function enables you to store your favorite tracks from any disc in the player memory. A program can contain 30 tracks. 1 Insert a disc. 2 Press PROGRAM button. The E mark will appear to the right of the word Program on the right side of the menu screen. • Press PROGRAM button again, then the E mark will disappear to exit the Program Edit mode.
ENGLISH V iewing a JPEG Disc - Using this DVD Player you can view Kodak PICTURE CDs and discs with JPEG files. 1 Insert a disc and close the tray. The PHOTO menu appears on the TV screen. PHOTO List JPEG Folder 1 JPEG Folder 2 JPEG Folder 3 JPEG Folder 4 JPEG Folder 5 JPEG Folder 6 JPEG Folder 7 JPEG Folder 8 Preview E 2 Press D / E button to select a folder, and press OK button. A list of files in the folder appears.
DVD operation V iewing a JPEG Disc A To listen to MP3/WMA music watching picture You can display files while listening to MP3/WMA music files recorded on the same disc. 1. Insert the disc containing the two types of file in the player. 2. Press TITLE button to display PHOTO menu. 3. Press D / E button to select a photo file. 4. Use G button to select icon then press OK button. Playback starts. The playback will continue until A STOP button is pressed.
ENGLISH Playing a DivX Movie Disc - Using this DVD Player you can play DivX (Digital Internet Video eXpress) disc. 1 Insert a disc and close the tray. The MOVIE menu appears on the TV screen. MOVIE A 0 : 00 : 00 List Movie Folder 1 Movie Folder 2 Movie Folder 3 Movie Folder 4 Movie Folder 5 Movie Folder 6 Movie Folder 7 Movie Folder 8 Data Duration E 2 Press D / E button to select a folder, and press OK button. A list of files in the folder appears.
Reference Troubleshooting Checklist The operation does not work normally. The remote control doesn’t work • Check to see if there is any object between the product and the remote control causing obstruction. • Are batteries installed with correct polarity (+ to +, - to -)? • Correct remote operating mode set: TV, VCR etc.? • Install new batteries. Power is suddenly turned off • Is the sleep timer set? • Check the power control settings.
ENGLISH The audio function does not work. Picture OK & No sound No output from one of the speakers Unusual sound from inside the product • Press the VOL or VOLUME button. • Sound muted? Press MUTE button. • Try another channel. The problem may be with the broadcast. • Are the audio cables installed properly? • Adjust Balance in menu option. • A change in ambient humidity or temperature may result in an unusual noise when the product is turned on or off and does not indicate a fault with the product.
Reference Language Codes Use this list to input your desired language for the following initial settings: Disc Audio, Disc Subtitle, Disc Menu.
ENGLISH IR codes How to Connect G Connect your wired remote control to the Remote Control port on the TV. Remote Control IR Codes G Output waveform Single pulse, modulated with 37.
Reference IR codes Code (Hexa) 0BH 08H 98H 53H 20H 4DH 52H 0AH 43H 79H 5BH 07H 06H 40H 41H 44H 72H 71H 63H 61H 02H 03H 00H 01H 09H 1AH 10H~19H 0EH 26H 24H 2AH 22H 62H 64H 65H 70H 64 Function TV/AV POWER MULTIMEDIA LIST TEXT PSM SSM I/II MENU ARC EXIT F G D E OK RED GREEN YELLOW BLUE VOL D VOL E PR D PR E MUTE Q.
ENGLISH External Control Device Setup ; RS-232C - Connect the RS-232C input jack to an external control device (such as a computer or an A/V control system) and control the TV’s functions externally. - Connect the serial port of the control device to the RS-232C jack on the TV back panel. - RS-232C connection cable is not supplied with the TV. RS-232C Setup PC Type of Connector; D-Sub 9-Pin Male No.
Reference External Control Device Setup ; RS-232C Set ID - Use this function to specify a monitor ID number. - Refer to ‘Real Data Mapping 1’. See page 67. 1. Press the MENU button and then use Setup menu. 2. Press the G button and then use D /E D /E button to select the Setup Language Input Child lock Set ID button to select Set ID. 3. Press the G button and then use F / G button to adjust Set ID to choose the desired monitor ID number. The adjustment range of Set ID is 1 ~ 99. 4.
ENGLISH 01. Power On (Command:a) 05. Volume Mute (Command:e) G To control Power On/Off of the TV. G To control volume mute on/off. You can also adjust mute using the MUTE button on remote control. Transmission Transmission [k][a][ ][Set ID][ ][Data][Cr] Data 0 : Power Off 1 : Power On Acknowledgement [k][e][ ][Set ID][ ][Data][Cr] [a][ ][Set ID][ ][OK][Data][x] Data 0 : Volume mute off (Volume on) 1 : Volume mute on (Volume off) G To show Power On/Off.
Reference External Control Device Setup ; RS-232C 09. Colour (Command:i) 15. Tune Command (Command:m a) G To adjust the screen colour. You can also adjust colour in the Picture menu. Transmission [k][i][ ][Set ID][ ][Data][Cr] G Tune channel to following Physical/major/minor number. Data Min : 0 ~ Max : 64 • Refer to ‘Real data mapping 1’. See page 67. Acknowledgement Data0: Programme Number Min : 0 ~ Max : 63(transmit by Hexadecimal code) [i][ ][Set ID][ ][OK][Data][x] Acknowledgement 10.
Please set it up carefully so the product doesn’t fall over. Set it up close to the wall so the product doesn’t fall over when it is pushed backwards. The instructions shown below is a safer way to set up the product, which is to fix it on the wall so the product doesn’t fall over when it is pulled in the forward direction. It will prevent the product from falling forward and hurting people. It will also prevent the product from damage caused by fall.
Product Specifications Power Requirement/ Power Consumption Dimensions (Width x Depth x Height) Weight (Net) Television System Programme Coverage External Antenna Impedance 26LZ5RV 27LZ5RV : AC 100-240V~ 50/60Hz 1.5A / 130W : AC 100-240V~ 50/60Hz 1.5A / 130W 26LZ5RV/27LZ5RV : 776.0 mm x 235.0 mm x 549.6 mm 30.6 inches x 9.3 inches x 21.6 inches 26LZ5RV 27LZ5RV : 17.0 kg (37.5 lbs) : 17.3 kg (38.
ENGLISH
