OWNER’S MANUAL LED TV *LG LED TV applies LCD screen with LED backlights. Please read this manual carefully before operating your set and retain it for future reference. LN45** P/NO : MFL67605616 (1302-REV00) Printed in Korea www.lg.
TABLE OF CONTENTS ENGLISH ENG TABLE OF CONTENTS 3 SAFETY INSTRUCTIONS 30 OPEN SOURCE SOFTWARE NOTICE 8 INSTALLATION PROCEDURE 30 EXTERNAL CONTROL DEVICE SETUP 8 ASSEMBLING AND PREPARING 8 11 12 13 13 13 14 15 16 Unpacking Parts and buttons Lifting and moving the TV Setting up the TV - Attaching the Stand Base - Detaching the Stand Base Mounting on a table Mounting on a wall Tidying cables 17 MAKING CONNECTIONS 17 Antenna connection 18 Adapter connection 18 HDMI connection 19 DVI to HDMI
SAFETY INSTRUCTIONS ENGLISH ENG SAFETY INSTRUCTIONS Please read these safety precautions carefully before using the product.
SAFETY INSTRUCTIONS ENGLISH ENG yyKeep the packing antimoisture material or vinyl packing out of the reach of children. Anti-moisture material is harmful if swallowed. If swallowed by mistake, force the patient to vomit and visit the nearest hospital. Additionally, vinyl packing can cause suffocation. Keep it out of the reach of children. yyDo not spray water on the product or scrub with an inflammable substance (thinner or benzene). Fire or electric shock accident can occur.
SAFETY INSTRUCTIONS yyApparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus. CAUTION yyInstall the product where no radio wave occurs. yyThere should be enough distance between an outside antenna and power lines to keep the former from touching the latter even when the antenna falls. This may cause an electric shock. yyDo not install the product on places such as unstable shelves or inclined surfaces.
SAFETY INSTRUCTIONS ENGLISH ENG yyPlease follow the installation instructions below to prevent the product from overheating. --The distance between the product and the wall should be more than 10 cm. --Do not install the product in a place with no ventilation (e.g., on a bookshelf or in a cupboard). --Do not install the product on a carpet or cushion. --Make sure the air vent is not blocked by a tablecloth or curtain. Otherwise, this may result in fire.
SAFETY INSTRUCTIONS yyRefer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. yyIf the product feels cold to the touch, there may be a small “flicker” when it is turned on. This is normal, there is nothing wrong with product.
INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING ENGLISH ENG NOTE yy yy yy yy yy Image shown may differ from your TV. Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual. The available menus and options may differ from the input source or product model that you are using. New features may be added to this TV in the future. The TV can be placed in standby mode in order to reduce the power consumption.
ASSEMBLING AND PREPARING 9 ENGLISH ENG or Remote control and batteries (AAA) ( See p.23) Owner’s manual Cable Tie (Depending on model) ( See p.16) Isolator (Depending on model) ( See p.10) AC-DC Adapter (Depending on model) ( See p.18) Stand Base ( See p.13) or Power Cord AC-DC Adapter (Depending on model) ( See p.18) ( See p.
ASSEMBLING AND PREPARING ENGLISH ENG NOTE yy Antenna Isolator Installation Guide -- Use this to install TV in a place where there is a voltage difference between TV Set and GND of antenna signal. »» If there is a voltage difference between TV Set and GND of antenna signal, the antenna contact might be heated and excessive heat might cause an accident. -- You can improve the safety when watching TV by efficiently removing power voltage from TV antenna.
ASSEMBLING AND PREPARING ENGLISH ENG Parts and buttons Screen Remote control Sensor Speakers OK SETTINGS INPUT Touch buttons1 Touch Buttons Description Scrolls through the saved programmes. H Adjusts the volume level. H OK ꔉ Selects the highlighted menu option or confirms an input. SETTINGS Accesses the main menu, or saves your input and exits the menus. INPUT Changes the input source. /I Turns the power on or off.
ASSEMBLING AND PREPARING ENGLISH ENG Lifting and moving the TV Please note the following advice to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size. yy When transporting a large TV, there should be at least 2 people. yy When transporting the TV by hand, hold the TV as shown in the following illustration. CAUTION yy Avoid touching the screen at all times, as this may result in damage to the screen.
ASSEMBLING AND PREPARING 13 ENGLISH ENG Setting up the TV Image shown may differ from your TV. Attaching the Stand Base 1 Detaching the Stand Base 1 Stand Base Stand Base NOTE yy When Detaching the stand from TV, Detach the stand with lifting up the lever in the direction of the arrow. 2 2 CAUTION yy Lay a foam mat or soft protective cloth on the surface to protect the screen from damage.
ASSEMBLING AND PREPARING ENGLISH ENG Mounting on a table 1 Lift and tilt the TV into its upright position on a table. -- Leave a 10 cm (minimum) space from the wall for proper ventilation. CAUTION yy Make sure that children do not climb on or hang on the TV. NOTE 10 cm 10 cm m 10 c 10 cm yy Use a platform or cabinet that is strong and large enough to support the TV securely. yy Brackets, bolts and ropes are not provided. You can obtain additional accessories from your local dealer.
ASSEMBLING AND PREPARING (This feature is not available for all models.) The Kensington security system connector is located at the rear of the TV. For more information of installation and using, refer to the manual provided with the Kensington security system or visit http://www.kensington.com. Connect the Kensington security system cable between the TV and a table.
ASSEMBLING AND PREPARING ENGLISH ENG CAUTION yy Disconnect the power first, and then move or install the TV. Otherwise electric shock may occur. yy If you install the TV on a ceiling or slanted wall, it may fall and result in severe injury. Use an authorized LG wall mount and contact the local dealer or qualified personnel. yy Do not over tighten the screws as this may cause damage to the TV and void your warranty. yy Use the screws and wall mounts that meet the VESA standard.
MAKING CONNECTIONS This section on MAKING CONNECTIONS mainly uses diagrams for the LN45** models. Connect various external devices to the TV and switch input modes to select an external device. For more information of external device’s connection, refer to the manual provided with each device. Available external devices are: HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external devices.
MAKING CONNECTIONS ENGLISH ENG Adapter connection HDMI connection Transmits the digital video and audio signals from an external device to the TV. Connect the external device and the TV with the HDMI cable as shown. DC-IN (19V ) AC-DC Adapter or (MHL) IN DC-IN (19V ) (*Not Provided) AC-DC Adapter HDMI CAUTION yy Please be sure to connect the TV to the ACDC power adapter before connecting the TV’s power plug to a wall power outlet.
MAKING CONNECTIONS Transmits the digital video signal from an external device to the TV. Connect the external device and the TV with the DVI-HDMI cable as shown. To transmit an audio signal, connect an audio cable. Transmits the analog video signal from your PC to the TV. Connect the PC and the TV with the D-sub 15 pin cable. To transmit an audio signal, connect an audio cable.
MAKING CONNECTIONS ENGLISH ENG Component connection Composite connection Transmits analog video and audio signals from an external device to the TV. Connect the external device and the TV with a component cable as shown. Transmits analog video and audio signals from an external device to the TV. Connect the external device and the TV with the composite cable as shown.
MAKING CONNECTIONS Transmits the headphone signal from the TV to an external device. Connect the external device and the TV with the headphone as shown. Mobile High-definition Link (MHL) is an interface for transmitting digital audiovisual signals from mobile phones to television sets. H/P MHL connection (MHL) (*Not Provided) NOTE yyAUDIO menu items are disabled when connecting a headphone. yyWhen changing AV MODE with a headphone connected, the change is applied to video but not to audio.
MAKING CONNECTIONS Connect a USB storage device such as a USB flash memory, external hard drive, or a USB memory card reader to the TV and access the My media menu to use various multimedia files. USB IN 5V 0.
REMOTE CONTROL 23 The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly. To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching the ends to the label inside the compartment, and close the battery cover. To remove the batteries, perform the installation actions in reverse. ENGLISH ENG REMOTE CONTROL and CAUTION yyDo not mix old and new batteries, as this may damage the remote control.
USING THE USER GUIDE ENGLISH ENG USING THE USER GUIDE User Guide allows you to more easily access the detailed TV information. Press SETTINGS to access the main menus. Press the RED button to access the Customer Support menus. Press the Navigation buttons to scroll to User Guide and press OK.
MAINTENANCE / TROUBLESHOOTING ENGLISH ENG MAINTENANCE 25 Cleaning your TV Clean your TV regularly to keep the best performance and to extend the product lifespan. CAUTION yy Make sure to turn the power off and disconnect the power cord and all other cables first. yy When the TV is left unattended and unused for a long time, disconnect the power cord from the wall outlet to prevent possible damage from lightning or power surges.
ENVIRONMENTAL INFORMATION ENGLISH ENG ENVIRONMENTAL INFORMATION (India only) WEEE Disposal of your old appliance 1. When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the e-waste (Management and Handling) Rules, 2011. 2. All electrical and electronic products should be disposed of separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities. 3.
SPECIFICATIONS 27 Product specifications may be changed without prior notice due to upgrade of product functions. For the power supply and power consumption, refer to the label attached to the product. MODELS 22LN45** 24LN45** 26LN45** 22LN4500-TA 22LN4500-TB 24LN4500-TA 24LN4500-TB 26LN4500-TA 26LN4500-TB Dimensions (W x H x D) With stand (mm) 513.0 x 362.0 x 140.0 557.0 x 390.0 x 140.0 621.0 x 431.0 x 162.1 Without stand(mm) 513.0 x 320.0 x 63.0 557.0 x 348.0 x 62.3 621.0 x 386.0 x 72.
SPECIFICATIONS ENGLISH ENG Environment condition Operating Temperature 0 °C to 40 °C Operating Humidity Less than 80 % Storage Temperature -20 °C to 60 °C Storage Humidity Less than 85 % Digital TV New Zealand, Singapore Television System Programme Coverage Australia Television System Programme Coverage Indonesia, Israel, Myanmar, Sri Lanka Television System Vietnam, Malaysia Television System Programme Coverage Programme Coverage Iran, Algeria, Tunisia, Digital model Television Sy
SPECIFICATIONS Resolution Horizontal Frequency(kHz) Vertical Frequency(Hz) 720 x 400 31.468 70.080 640 x 480 31.469 59.940 640 x 480 37.500 75.000 800 x 600 37.879 60.317 800 x 600 46.875 75.000 1024 x 768 48.363 60.004 1024 x 768 60.023 75.029 1280 x 800 49.702 59.810 1366 x 768 47.717 59.790 NOTE yyThe optimal display resolution is 1366 X 768@60Hz. yyThe optimal timing in each mode is vertical frequency 60Hz.
LICENSES / OPEN SOURCE SOFTWARE NOTICE / EXTERNAl CONTROL DEVICE SETUP ENGLISH ENG LICENSES Supported licenses may differ by model. For more information about licenses, visit www.lg.com. Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
Record the model number and serial number of the TV. Refer to the label on the back cover and quote this information to your dealer when requiring any service.
