LCD TV / DVD Combo OWNER’S MANUAL 26LG40 32LG40 Please read this manual carefully before operating your set and retain it for future reference. Write the model number and serial number from the label on the back cabinet on the front or back of this manual. CAUTION - CLASS 1M VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN DO NOT VIEW DIRECTLY WITH OPTICAL INSTRUMENTS P/NO : SAC31712401 (0810-REV06) www.lgusa.com / www.lg.
WARNING / CAUTION WARNING / CAUTION To prevent fire or shock hazards, do not expose this product to rain or moisture. TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.
SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. 1 2 Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 7 Only use attachments/accessories specified by the manufacturer. 8 Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus.
SAFETY INSTRUCTIONS 2 11 Never touch this apparatus or antenna during a thunder or lighting storm. 12 When mounting a TV on the wall, make sure not to install the TV by the hanging power and signal cables on the back of the TV. 13 Do not allow an impact shock or any objects to fall into the product, and do not drop onto the screen with something.
20 ANTENNAS Outdoor antenna grounding If an outdoor antenna is installed, follow the precautions below. An outdoor antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can come in contact with such power lines or circuits as death or serious injury can occur. Be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges.
CONTENTS WARNING / CAUTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . A SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Input List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 Input Label . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 AV Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SOUND & LANGUAGE CONTROL APPENDIX Auto Volume Leveler (Auto Volume) . . . . . . . . . . . . . . . . . 74 Clear Voice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75 Preset Sound Setting (Sound Mode) . . . . . . . . . . . . . . . . 76 Sound Setting Adjustment - User Mode . . . . . . . . . . . 77 Balance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 TV Speakers On/Off Setup .
is a trademark of SRS Labs, Inc. TruSurround XT technology is incorporated under license from SRS Labs, Inc. Manufactured under license from Dolby Laboratories. “Dolby “and the double-D symbol are trademarks of Dolby Laboratories. is a trademark of DVD format/Logo Licensing Corporation. This product incorporates copy protection technology that is protected by U.S. and foreign patents, including patent numbers 5,315,448 and 6,836,549, and other intellectual property rights.
PREPARATION ACCESSORIES NT ER + ZO CH OM 2 5 AB TIT LE 6 3 AN GL E E A G P ME NU 9 0 TV PO ST Q.
PREPARATION FRONT PANEL INFORMATION PREPARATION ■ Image shown may differ from your TV. ■ NOTE: If your TV has a protection tape attached, remove the tape. And then wipe the TV with a cloth (If a polishing cloth is included with your TV, use it). EJECT Button PLAY/PAUSE Button / STOP Button SKIP Button CHANNEL ( , ) Buttons VOLUME (+, -) Buttons ENTER Button MENU Button Power/Standby Indicator Illuminates red in standby mode. Illuminates blue when the TV is switched on. (Can be adjusted.
BACK PANEL INFORMATION Image shown may differ from your TV. R ■ R PREPARATION HDMI/DVI IN RGB IN RGB(PC) 6 HDMI IN 3 3 ANTENNA/ CABLE IN DIGITAL AUDIO AUDIO OUT (RGB/DVI) OPTICAL 7 2 4 REMOTE CONTROL IN AUDIO VIDEO COMPONENT IN RS-232C IN (CONTROL & SERVICE) AUDIO OUT ( S-VIDEO VIDEO (MONO) ) AUDIO 8 AV IN 1 1 9 VIDEO L/MONO AUDIO R 1 5 USB SERVICE ONLY 11 10 1 9 AV IN 2 2 1 HDMI/DVI IN, HDMI IN Digital Connection. Supports HD video and Digital audio.
PREPARATION STAND INSTRUCTION ■ Image shown may differ from your TV. INSTALLATION DETACHMENT PREPARATION 1 Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. 2 Assemble the parts of the S T A N D B O D Y with C O V E R B A S E of the TV. 1 Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. 2 Loose the bolts from TV. 3 Detach the stand from TV. STAND BODY COVER BASE 3 Assemble the TV as shown.
CABLE MANAGEMENT ■ Image shown may differ from your TV. Align the hole with the tab on the C A B L E M A N A G E M E N T C L I P. Turn the C A B L E M A N A G E M E N T C L I P as shown. Note: This cable management clip can be broken by excessive pressure. 2 Connect the cables as necessary. To connect additional equipment, see the EXTERNAL EQUIPMENT SETUP section.
PREPARATION DESKTOP PEDESTAL INSTALLATION ■ Image shown may differ from your TV. PREPARATION For proper ventilation, allow a clearance of 4 inches on all four sides from the wall. 4 inches 4 inches 4 inches 4 inches CAUTION G G Ensure adequate ventilation by following the clearance recommendations. Do not mount near or above any type of heat source. SWIVEL STAND After installing the TV, you can adjust the TV set manually to the left or right direction by 20 degrees to suit your viewing position.
VESA WALL MOUNTING PREPARATION Install your wall mount on a solid wall perpendicular to the floor. When attaching to other building materials, please contact your nearest dealer. If installed on a ceiling or slanted wall, it may fall and result in severe personal injury. We recommend that you use an LG brand wall mount when mounting the TV to a wall. LG recommends that wall mounting be performed by a qualified professional installer.
PREPARATION SECURING THE TV TO THE WALL TO PREVENT FALLING WHEN THE TV IS USED ON A STAND ■ PREPARATION ■ You should purchase necessary components to prevent TV from falling off of the stand. Image shown may differ from your TV. We recommend that you set up the TV close to a wall so it cannot fall over if pushed backwards. Additionally, we recommend that the TV be attached to a wall so it cannot be pulled in a forward direction, potentially causing injury or damaging the product.
■ To prevent damage do not connect to the power outlet until all connections are made between the devices. R ANTENNA OR CABLE CONNECTION Multi-family Dwellings/Apartments (Connect to wall antenna socket) ANTENNA/ CABLE IN R Wall Antenna Socket R Wall Antenna Socket or Outdoor Antenna without a Cable Box Connections. For optimum picture quality, adjust the antenna direction if needed. PREPARATION 1.
EXTERNAL EQUIPMENT SETUP ■ To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment. HD RECEIVER SETUP This TV can receive digital over-the-air or digital cable signals without an external digital set-top box. However, if you do receive digital signals from a digital set-top box or other digital external device, refer to the figure as shown below. EXTERNAL EQUIPMENT SETUP Component Connection AUDIO A (RGB/DVI) RGB(PC) 2 1.
HDMI Connection 1. How to connect 2 No separate audio connection is necessary. HDMI supports both audio and video. 2. How to use ( HDMI/DVI IN RGB IN RGB(PC) AUDIO (RGB/DVI) 2 1 REMOTE CONTROL IN AUDIO VIDEO ) RS-23 (CONTROL COMPONENT IN Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.) ■ Select the H D M I 1, H D M I2, or H D M I 3 input source on the TV using the INPUT button on the remote control.
EXTERNAL EQUIPMENT SETUP DVI to HDMI Connection HDMI/DVI IN RGB IN RGB(PC) DIGITAL AUDIO AUDIO OU (RGB/DVI) OPTICA EXTERNAL EQUIPMENT SETUP 2 1 REMOTE CONTROL IN RS-232C IN (CONTROL & SERVICE) AUDIO VIDEO S-VIDEO VIDEO COMPONENT IN 1 ( ) 2 DVI-DTV OUTPUT L R 1. How to connect 1 Connect the DVI output of the digital set-top box to the H D M I / D V I I N 1, 2 , or 3 jack on the TV. 2 Connect the PC audio output to the A U D I O ( R G B / D V I ) jack on the TV. 2.
DVD SETUP Component Connection 1. How to connect 2 2 Connect the audio outputs of the DVD to the C O M P ON E N T I N A U D I O jacks on the TV. 1 REMOTE CONTROL IN AUDIO VIDEO COMPONENT IN 2. How to use ■ Turn on the DVD player, insert a DVD. ■ Select C o m p o n e n t input source by using the I N P U T button on the remote control. ■ Refer to the DVD player's manual for operating instructions.
EXTERNAL EQUIPMENT SETUP S-Video Connection 1. How to connect Connect the S-VIDEO output of the DVD to the S V I D E O input on the TV. 2 Connect the audio outputs of the DVD to the A U D I O input jacks on the TV. AUDIO S-VIDEO ■ ■ R ANTENNA/ CABLE IN 2. How to use ■ L 2 1 Turn on the DVD player, insert a DVD. Select the A V 1 input source on the TV using the I N P U T button on the remote control. Refer to the DVD player's manual for operating instructions.
VCR SETUP ( ) To avoid picture noise (interference), leave an adequate distance between the VCR and TV. ■ If the 4:3 picture format is used; the fixed images on the sides of the screen may remain visible on the screen. This phenomenon is common to all TVs and is not covered by warranty.
EXTERNAL EQUIPMENT SETUP ( ) Composite (RCA) Connection ANT IN S-VIDEO VIDEO ANT OUT OUTPUT SWITCH L R 1. How to connect V I D E O jacks between TV and Connect the A U D I O/V VCR. Match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red) EXTERNAL EQUIPMENT SETUP Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.) ■ Select the A V 1 input source on the TV using the I N P U T button on the remote control.
OTHER A/V SOURCE SETUP Camcorder 1. How to connect V I D E O jacks Connect the A U D I O/V between TV and external equipment. Match the jack colors. (Video = yellow, Audio Left = white, and Audio Right = red) ■ ■ Select the A V 2 input source on the TV using the I N P U T button on the remote control. If connected to A V I N 1 input, select the A V 1 input source on the TV. Operate the corresponding external equipment. L USB IN HDMI IN 3 ■ VIDEO L/MONO AUDIO R 2.
EXTERNAL EQUIPMENT SETUP AUDIO OUT CONNECTION Send the TV’s audio to external audio equipment via the Audio Output port. ( C) (RGB/DVI) 1. How to connect Connect audio outputs to the TV’s AUDIO OUT jacks. 2 Set the “TV Speaker option - Off” in the AUDIO menu. (G p . 7 9). See the external audio equipment instruction manual for operation. AUDIO N RS-232C IN (CONTROL & SERVICE) AUDIO OUT (MONO) S-VIDEO VIDEO ( ) 1 Digital 1.
PC SETUP This TV provides Plug and Play capability, no display driver is needed. VGA (D-Sub 15 pin) Connection 1. How to connect Connect the VGA output of the PC to the R G B ( P C) jack on the TV. 2 Connect the PC audio output to the A U D I O ( R G B / D V I) jack on the TV. 2. How to use ■ ■ Turn on the PC and the TV. Select the R G B - P C input source on the TV using the I N P U T button on the remote control.
EXTERNAL EQUIPMENT SETUP DVI to HDMI Connection 1. How to connect EXTERNAL EQUIPMENT SETUP 1 Connect the DVI output of the PC to the H D M I / D V I I N 1, 2 , or 3 jack on the TV. HDMI/DVI IN RGB IN RGB(PC) 2 Connect the PC audio output to the A U D I O ( R G B / D V I ) jack on the TV. 2 1 REMOTE CONTROL IN RS-232C IN (CONTROL & SERVICE) 2. How to use Turn on the PC and the TV. ■ Select the H D M I 1, HDMI 2 or HDMI 3 input source on the TV using the I N P U T button on the remote control.
! NOTES To get the the best picture quality, adjust the PC graphics card to 1360x768. G Depending on the graphics card, DOS mode may not work if a HDMI to DVI Cable is in use. G In PC mode, there may be noise associated with the resolution, vertical pattern, contrast or brightness. If noise is present, run Auto Config. in the Screen (RGB-PC) menu.
EXTERNAL EQUIPMENT SETUP Screen Setup for PC mode Selecting Resolution You can choose the resolution in RGB-PC mode. The P o s i t i o n, P h a s e, and S i z e can also be adjusted. EXTERNAL EQUIPMENT SETUP PICTURE SCREEN Enter Move MENU Prev. E • Contrast 50 • Brightness 50 • Sharpness 50 • Color 50 • Tint 0 Resolution Auto config. Position R G • Advanced Control • Reset Screen (RGB-PC) Size Phase Reset 1 2 MENU/ SET UP Select P I C T U R E.
Auto Configure Automatically adjusts picture position and minimizes image instability. After adjustment, if the image is still not correct, try using the manual settings or a different resolution or refresh rate on the PC. Move SCREEN Enter E • Contrast 50 • Brightness 50 • Sharpness 50 • Color 50 • Tint 0 Move MENU Prev. Resolution Auto config. G To Set Position R G • Advanced Control • Reset Screen (RGB-PC) Yes Size No Phase Reset 1 2 MENU/ SET UP ENTER Select P I C T U R E.
EXTERNAL EQUIPMENT SETUP Adjustment for screen Position, Size, and Phase PICTURE Move SCREEN Enter Move MENU Prev. E EXTERNAL EQUIPMENT SETUP If the picture is not clear after auto adjustment and especially if characters are still trembling, adjust the picture phase manually. This feature operates only in RGB-PC mode. • Contrast 50 • Brightness 50 • Sharpness 50 • Color 50 • Tint 0 Resolution Auto config.
Screen Reset (Reset to original factory values) Returns P o s i t i o n, S i z e, and P h a s e to the default factory settings. This feature operates only in RGB-PC mode. Move SCREEN Enter Move MENU Prev. E • Contrast 50 • Brightness 50 • Sharpness 50 • Color 50 • Tint 0 Resolution Auto config. Position R To set G • Advanced Control Yes Size No EXTERNAL EQUIPMENT SETUP PICTURE • Reset Screen (RGB-PC) Phase Reset 1 2 MENU/ SET UP Select P I C T U R E.
WATCHING TV / CHANNEL CONTROL REMOTE CONTROL FUNCTIONS When using the remote control, aim it at the remote control sensor on the TV. BUILT-IN TV/STB/VCR Select the remote operating mode: TV, STB, VCR, or BUILT-IN DVD. /BUILT-IN DVD POWER Turns your TV or any other programmed equipment on or off, depending on the mode. TV DVD VCR INPUT STB MENU/ Q. MENU SETUP ROTATE - MENU Displays the main menu. Clear all on-screen displays and return to TV viewing from any menu.
THUMBSTICK Navigate the on-screen menus and adjust the system settings to your preference. (Up/Down/Left Right/ENTER) RETURN Allows the user to move return one step in an interactive application or other user interaction function. Also closes menus. AV MODE Toggles through preset picture and audio settings. G p.43 Blue Color The recommands printed on the remote in blue are active when in Built-In DVD mode. Button For further details, see the ‘DVD Operation’ section. G p.
WATCHING TV / CHANNEL CONTROL TURNING ON TV First, connect power cord correctly. At this moment, the TV switches to standby mode. ■ In standby mode to turn TV on, press the , I N P U T, C H ( button on the TV or press the P O W E R, I N P U T, C H ( N u m b e r ( 0~9 9 ) button on the remote control. 1 or or ) ), WATCHING TV / CHANNEL CONTROL Select the viewing source by using the I N P U T button on the remote control.
QUICK MENU / FAVORITE CHANNEL SETUP Your TV's OSD (On Screen Display) may differ slightly from what is shown in this manual. Q.Menu (Quick Menu) is a menu of features which users might use frequently. ■ ■ ■ ■ ■ ■ ■ ■ Favorite Channle Setup 1 CH 2Q. MENU 3 4Q. MENU ■ F 2 3 4 5 6 8 9 7 Select your desired channel. Select D e l / A d d / F a v. Select F a v o r i t e. Return to TV viewing. To tune to a favorite channel, press the F A V (Favorite) button repeatedly.
WATCHING TV / CHANNEL CONTROL INITIAL SETTING This Function guides the user to easily set the essential items for viewing the TV for the first time when purchasing the TV. It will be displayed on the screen when turning the TV on for the first time. It can also be activated from the user menus. ■ ■ WATCHING TV / CHANNEL CONTROL H o m e”. We recommend setting the TV to “H H o m e” mode for the best picture in your Default selection is “H home environment.
ON-SCREEN MENUS SELECTION Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual.
WATCHING TV / CHANNEL CONTROL CHANNEL SETUP Auto Scan (Auto Tuning) Automatically finds all channels available through antenna or cable inputs, and stores them in memory on the channel list. Run Auto Tuning again after any Antenna/Cable connection changes. WATCHING TV / CHANNEL CONTROL CHANNEL Move Enter Auto Tuning Manual Tuning Manual Tuning Channel Edit Channel Edit Move Enter Press ‘Yes’ button to begin auto tuning. Yes No 1 2 MENU/ SET UP ENTER Select C H A N N E L.
Add/Delete Channel (Manual Tuning) If selecting DTV or CADTV input signal, you can view the on-screen signal strength monitor to see the quality of the signal being received. CHANNEL Move Enter CHANNEL Move Auto Tuning Manual Tuning Manual Tuning Channel Edit Channel Edit DTV F G Select channel type and RF-channel number. Channel 2 DTV 2-1 Bad Normal Good Delete Close 1 2 MENU/ SET UP Select C H A N N E L. Select M a n u a l T u n i n g.
WATCHING TV / CHANNEL CONTROL Channel Editing A custom list can be created by toggling each channel on or off with the ENTER button. The channels in the Custom List are displayed in black and the channels deleted from the Custom List are displayed in gray. Once a channel is highlighted you can add or delete the channel by referring to the small window at the topright corner of the screen.
INPUT LIST Only these input signals which are connected to a TV can be activated and selected. Antenna ENTER AV1 AV2 Component Select the desired input source. Antenna Cable AV1 AV2 Component HDMI3 HDMI2 HDMI1 RGB-PC Built-In DVD ie) Disconnected inputs are inactivated (grayed out). Antenna Cable AV1 AV2 Q.MENU ■ ■ ■ ■ A n t e n n a: Select it to watch over-the-air broadcasts. C a b l e: Select it to watch cable and digital cable.
WATCHING TV / CHANNEL CONTROL INPUT LABEL You can set a label for each input source when it's not in use.
AV MODE You can select the optimal images and sounds. 2 Cinema Game Sport Press the A V M O D E button repeatedly to select the desired source. ENTER ■ ■ WATCHING TV / CHANNEL CONTROL 1AV MODE Off C i n e m a” in AV mode, If you select “C C i n e m a will be selected both for “PICTURE menu - Picture Mode” and “AUDIO menu - Sound Mode” respectively. O f f” in AV mode, the If you select “O P i c t u r e M o d e” and “S S o u n d M o d e” “P return to previous selected value.
WATCHING TV / CHANNEL CONTROL This function operates only with devices with the logo. The TV might not function properly when using it with other products with HDMI-CEC function. This allows you to control and play other AV devices connected with HDMI cable without additional cables and settings. To start using SIMPLINK, turn it on in the user menus.
SIMPLINK Functions D i r e c t P l a y : After connecting AV devices to the TV, you can directly control the devices and play media without additional settings. ■ S e l e c t A V d e v i c e : Enables you to select one of the AV devices connected to TV. ■ D i s c p l a y b a c k : Control connected AV devices by pressing the , ENTER, G, A, l l, FF and GG buttons. ■ P o w e r o f f a l l d e v i c e s : When you power off the TV, all connected devices are turned off.
DVD OPERATION NOTES ON DISCS Symbol used in this manual objects on discs outside of their case may cause warping. “ ” may appear on the TV screen during operation. A “ ” means that the operation is not permitted by the unit or is not available on the disc. Structure of disc contents On handling discs ■ Do not touch the playback side of the disc. Normally, DVD video discs are divided into titles, and the titles are sub-divided into chapters. Video CDs and Audio CDs are divided into tracks.
Types of Playable Discs ■ ■ ■ DVD (8 cm / 12 cm disc) Video CD (VCD) (8 cm / 12 cm disc) Audio CD (8 cm / 12 cm disc) In addition, this unit plays DVD -R, DVD +R, DVD -RW, DVD +RW, Kodak Picture CDs, SVCD, and CD-R / CDRW that contains audio titles, MP3, and/or JPG files. Regional code of the DVD player and DVDs This DVD player is designed and manufac1 ” encoded tured for playback of region “1 DVD software.
DVD OPERATION ! NOTE G Insert a DVD and press STOP button twice to access this DVD setup menu. SELECTING LANGUAGE Selecting Audio Language Select your preferred audio language. If an audio language is selected, the selected audio language is played whenever you start a new disc playback. (The disc must contain the selected language) You can also select another available audio language during playback with the A U D I O button on the remote control during playback.
Selecting Subtitle Language Select your preferred subtitle language. If a subtitle language is selected, the selected subtitle language is played whenever you start a new disc playback. (The disc must contain the selected language) You can also select another available subtitle language with the S U B T I T L E button on the remote control during playback.
DVD OPERATION Selecting Disc OSD Language The OSD (on screen display) can be shown on the screen in your specified language. Audio Language Subtitle Language Subtitle Language Rating Level Rating Level New Password New Password DVD OPERATION TV Screen TV Screen MENU Language Digital Output DRC DE 1 MENU/ SET UP 2 3 50 Audio Language : Move G G English Spanish French : Next Select M E N U L a n g u a g e. Select desired language.
PARENTAL CONTROL / RATINGS Parental Control Setup Some movies contain scenes that may not be suitable for children to view. Many of these discs contain parental control information that applies to the complete disc or to certain scenes on the disc. Movies and scenes are rated from 1 to 8, depending on the country. Some discs offer more suitable scenes as an alternative.
DVD OPERATION Changing the password Audio Language Audio Language Subtitle Language Subtitle Language Rating Level Rating Level DVD OPERATION New Password G ---- MENU Language MENU Language Digital Output Digital Output DRC : Move DE MENU/ SET UP 2 G : Next Select N e w P a s s w o r d. 1 2 3 4 5 6 7 8 9 Input the password. 0 3 1 2 3 4 5 6 7 8 9 Enter it again when requested.
PICTURE SIZE CONTROL You can watch TV in various picture formats. Audio Language Audio Language Subtitle Language Subtitle Language Rating Level Rating Level New Password TV Screen G MENU Language Digital Output 4 : 3 LB 4 : 3 PS 16 : 9 DRC DE 1 MENU/ SET UP Digital Output 4 : 3 LB 4 : 3 PS 16 : 9 DRC : Move G : Next DE : Move F : Prev Select T V S c r e e n. ■ Depending on the disc, the TV screen feature may not be available.
DVD OPERATION DIGITAL AUDIO OUTPUT You can select the output for SPDIF (Sony/Philips Digital Interface). Each DVD disc has a variety of audio output options. Set the player’s AUDIO options according to the type of audio system you use.
DYNAMIC RANGE COMPRESSION (DRC) Confines the audio range to prevent excessively loud sound yet allows you to hear the low sounds clearly. Audio Language Audio Language Subtitle Language Subtitle Language Rating Level Rating Level New Password New Password TV Screen TV Screen MENU Language MENU Language Digital Output DRC DE 1 MENU/ SET UP 2 3 G : Move G : Next Off On DE G : Move F : Prev Off On Select D R C.
DVD OPERATION PLAYING A DVD OR VIDEO CD Basic Playback Fast Forward/Backward 1POWER 1 2 Turn TV on. Slide your chosen disc into the disc slot on the side panel. Be sure to face the top of the disc (with title etc.) toward the front of the screen. Playback starts. ■ DVD OPERATION If there are scratches on the DVD or CD Disc, then it may happen the kind of the mechanical noise a little. 2 Return to normal playback. Slow Motion 1SLOW - SLOW + Stop Playback/Ejection 1 Stop playback.
Still Picture and Frame-by-Frame Playback 1 1 TITLE MENU Press this button during playback. 6 Press this button during playback. 2SKIP - 2 SKIP + Press this button during playback. Press it repeatedly to advance the picture frame-by-frame. ENTER ■ Select the desired item. The TV may not be able to select the disc or title menu depending on a sort of DVD disc. Exit still motion mode. Repeat Playback You can play a specific title, chapter, track, or segment repeatedly.
DVD OPERATION A-B Repeat Playback Subtitles A-B repeat playback allows you to repeat material between two selected points. 1 1 Select the start point during back. “ A” is displayed on TV screen and the starting point of your selected segment is set up. A-B 5 2 A-B DVD OPERATION 5 3 SUBTITLE 7 Press it during playback to see the different subtitle languages. Zoom Select the end point. “ AB” is displayed on TV screen and the ending point is set up.
MP3 OPERATION MP3 Files Playback Options Move to another Track 1 1SKIP - When inserted, the MP3 menu screen appears automatically depending on the MP3 disc’s folder (directory) structure. 02 : 30 03 : 37 001 / 011 G SKIP - / D .. PICTURE 2 PICTURE 1 O.S.T. - 3 PICTURE 3 O.S.T. - 4 2 E 500 x 375 Press it briefly during playback to go to the next track or to return to the beginning of the current track. Press it twice briefly to go back to the previous track.
DVD OPERATION AUDIO CD OPERATION On-Screen Display Repeat Playback You can display the Track, and Playback time status on the TV screen. You can play a specific track repeatedly. 1 DISPLAY 1 Press this button during playback. Press it repeatedly to change track information: Single Elapsed, Single Remain, Total Elapsed, or Total Remain. 1 REPEAT 4 Use this button during playback. Press it repeatedly to change the repeat mode: Track, All, Repeat Off.
JPG FILE VIEWING OPTIONS As a JPG file is loaded, the table of contents appears on the TV screen. Rotation Picture Selection ROTATE - ROTATE + 1 1 Rotate a JPG file clockwise or counter clockwise during showing a picture. Select the desired picture. The selected JPG file appears as shown. 02 : 30 03 : 37 001 / 011 Repeat Playback G D Resolution 2 E 500 x 375 You can show JPG files repeatedly. 1 REPEAT 4 Start Slide show mode. ■ 3 Return to play list.
PICTURE CONTROL PICTURE SIZE (ASPECT RATIO) CONTROL This feature lets you choose the way an analog picture with a 4:3 aspect ratio is displayed on your TV. ! NOTE G If a fixed image is displayed on the screen for very long time, the image could become imprinted on the screen and remain visible. This phenomenon is common to all manufacturers and is not covered by warranty. Normally it will dissipate after a few minutes.
Set by program Zoom 1 Selects the proper picture proportion to match the source’s image. Choose Zoom 1 when you want to view the picture without any alteration. However, the top and bottom portions of the picture will be cropped. (4:3 16:9) Zoom 2 Choose Zoom 2 when you want the picture to be altered, both vertically extended and cropped. The picture taking a halfway trade off between alteration and screen coverage.
PICTURE CONTROL PRESET PICTURE SETTINGS Picture Mode - Preset There are factory presets for picture settings available in the user menus. You can use a preset, change each setting manually.
Color Tone - Preset Choose one of three automatic color adjustments. Set to warm to enhance hotter colors such as red, or set to cool to see less intense colors with more blue.
PICTURE CONTROL MANUAL PICTURE ADJUSTMENT Picture Mode - User Mode Adjust the picture appearance to suit your preference and viewing situations. PICTURE Move Enter Aspect Ratio : 16:9 Picture Mode : Standard 50 • Sharpness 60 • Color 60 0 • Backlight E R G E 1 3 MENU/ SET UP Select P I C T U R E. ENTER Select P i c t u r e M o d e. ENTER Select V i v i d, S t a n d a r d, C i n e m a, S p o r t, or G a m e.
Picture Mode - Expert Control By segmenting categories, E x p e r t 1 and E x p e r t 2 provide more categories which users can set as they see fit, offering the optimal picture quality for users.
PICTURE CONTROL PICTURE IMPROVEMENT TECHNOLOGY Fresh Contrast: Optimizes the contrast automatically according to the brightness of the reflection. Fresh Color: Adjusts the color of the reflection automatically to reproduce as close as possible natural colors. Noise Reduction: Removes interference up to the point where it does not damage the original picture. Gamma: High gamma values display whitish images and low gamma values display high contrast images.
ADVANCED CONTROL - BLACK (DARKNESS) LEVEL Adjusting the contrast and the brightness of the screen using the black level of the screen. This feature is disable in DTV and RGB-PC mode.
PICTURE CONTROL ADVANCED CONTROL - EYE CARE Dims extremely bright pictures. P i c t u r e M o d e - V i v i d, C i n e m a”.
ADVANCED CONTROL - REAL CINEMA Set up the TV for the best picture appearance for viewing movies. When you operate Real Cinema (3:2 Pull-Down Mode or Cinema Correction Mode), the TV will adjust 24 fps video from movies to 30 fps video for display. This feature operates only in TV (Analog TV/CATV, Digital DTV/CADTV), AV1, AV2, Component 480i/1080i, and HDMI 1080i mode.
PICTURE CONTROL PICTURE RESET Settings of the selected picture modes return to the default factory settings. PICTURE Move Enter PICTURE Move E 50 • Contrast 50 • Brightness 50 • Brightness 50 • Sharpness 50 • Sharpness 50 • Color 50 • Color 50 0 R • Tint G 0 R i Resetting video configuration... • Advanced Control G • Advanced Control • Reset Screen (RGB-PC) 1 2 MENU/ SET UP ENTER Select P I C T U R E. Select R e s e t.
POWER INDICATOR OPTION Language Move Enter : English Input Label OPTION Move Language Input Label Key Lock : Off Key Lock : Off Caption : Off Caption : Off Set ID :1 Set ID :1 Power Indicator Initial Setting Enter : English Power Indicator : Home Initial Setting Standby Light : Home F On G Close 1 2 MENU/ SET UP Select O P T I O N. ENTER Select P o w e r I n d i c a t o r. ENTER Select S t a n d b y L i g h t or P o w e r L i g h t.
SOUND & LANGUAGE CONTROL AUTO VOLUME LEVELER (AUTO VOLUME) Auto Volume makes sure that the volume level remains consistent whether you are watching a commercial or a regular TV program. AUDIO Move Auto Volume : Off Clear Voice : On Clear Voice : On Sound Mode 0 L : Standard • SRS TruSurround XT: Off • Treble 50 • Bass 50 • Bass 50 SOUND & LANGUAGE CONTROL ENTER Select A u t o V o l u m e. 3 74 Sound Mode 0 50 Select A U D I O.
CLEAR VOICE By differentiating the human sound range from others, it improves the sound quality of voices. AUDIO Move Auto Volume : Off Clear Voice : On Balance Sound Mode 0 AUDIO Enter L : Standard R : Off Clear Voice : On Sound Mode L R : Standard • SRS TruSurround XT: Off • Treble 50 • Treble 50 • Bass 50 • Bass 50 • Reset E SOUND & LANGUAGE CONTROL 2 On 0 • SRS TruSurround XT: Off E MENU/ SET UP Enter Off Balance • Reset 1 Move Auto Volume Select A U D I O.
SOUND & LANGUAGE CONTROL PRESET SOUND SETTINGS (SOUND MODE) Sound Mode lets you enjoy the best sound without any special adjustment as the TV sets the appropriate sound options based on the program content. S t a n d a r d, M u s i c, C i n e m a, S p o r t, and G a m e are preset for optimum sound quality at the factory and are not adjustable.
SOUND SETTING ADJUSTMENT - USER MODE Adjust the sound to suit your taste and room situations. Move Auto Volume : Off Clear Voice : On Balance Sound Mode 0 L AUDIO Enter : Off Clear Voice : On Balance R : Standard Sound Mode OffTruSurround XT • SRS TruSurround XT:SRS 50 • Treble 50 Treble 50 • Bass 50 • Bass 50 Bass 50 E 5 ENTER Select S o u n d M o d e. 6RETURN Select S t a n d a r d, M u s i c, C i n e m a, S p o r t, or G a m e. ENTER Select T r e b l e or B a s s.
SOUND & LANGUAGE CONTROL BALANCE Adjust the left/right sound of speaker to suit your taste and room situations. Move Enter : Off Auto Volume : Off Clear Voice : On Clear Voice : On L R : Standard Sound Mode • SRS TruSurround XT: Off Close 50 • Treble 50 • Bass 50 • Bass 50 SOUND & LANGUAGE CONTROL 4RETURN MENU/ SET UP 78 Select A U D I O. Select B a l a n c e.
TV SPEAKERS ON/OFF SETUP Turn the TV speakers off if using external audio equipment. AUDIO Move Enter AUDIO Move E E Clear Voice : On Balance Clear Voice 0 Sound Mode L : Standard R : On Balance Sound Mode 0 L • SRS TruSurround XT: Off • Treble 50 • Treble 50 • Bass 50 • Bass 50 : On R : Standard • SRS TruSurround XT: Off • Reset TV Speaker Enter • Reset TV Speaker : On Off On 2 MENU/ SET UP Select A U D I O. ENTER Select T V S p e a k e r.
SOUND & LANGUAGE CONTROL AUDIO RESET Settings of the selected Sound Mode return to the default factory settings. AUDIO Move : Off Auto Volume : Off Clear Voice : On Clear Voice : On Sound Mode 0 SOUND & LANGUAGE CONTROL ENTER 4 80 MENU/ SET UP Balance Sound Mode 0 L • SRS TruSurround XT: Off 50 • Treble 50 • Bass 50 • Bass 50 Select A U D I O. Select R e s e t. Initialize the adjusted value. Return to TV viewing. R i Resetting audio configuration...
STEREO/SAP BROADCAST SETUP For Analog only: This TV can receive MTS stereo programs and any SAP (Secondary Audio Program) that accompanies the stereo program if the station transmits an additional sound signal. Mono sound is automatically used if the broadcast is only in Mono. Q.Menu Aspect Ratio 16:9 3 Backlight Off Clear Voice Picture Mode Vivid Sound Mode Standard Off Caption Multi Audio English Sleep Timer Off Del/Add/Fav Add G SOUND & LANGUAGE CONTROL CH F Close Analog TV 1Q.
SOUND & LANGUAGE CONTROL AUDIO LANGUAGE Other languages may be available if a digital signal is provided by the broadcasting station. This feature operates only in DTV/CADTV mode. OPTION Language Move Enter : English Input Label SIMPLINK Key Lock : Off Key Lock : Off Caption : Off Caption : Off Set ID :1 Set ID :1 SOUND & LANGUAGE CONTROL Select O P T I O N. ENTER Select L a n g u a g e. ENTER Select A u d i o.
ON-SCREEN MENUS LANGUAGE SELECTION The menus can be shown on the screen in the selected language. OPTION Language Move Enter : English Input Label SIMPLINK Input Label Key Lock : Off Key Lock : Off Caption : Off Caption : Off Set ID :1 Set ID : On :1 Audio F English G English Close Power Indicator : Home Select O P T I O N. ENTER Select L a n g u a g e. ENTER Select M e n u.
SOUND & LANGUAGE CONTROL CAPTION MODE Analog Broadcasting System Captions Caption must be provided to help people with hearing loss watch TV. Select a caption mode for displaying captioning information if provided on a program. Analog caption displays information at any position on the screen and is usually the program's dialog. Caption/Text, if provided by the broadcaster, would be available for both digital and analog channels on the Antenna/Cable.
Digital Broadcasting System Captions Choose the language you want the DTV/CADTV Captions to appear in. Other Languages can be chosen for digital sources only if they are included on the program. This function in only available when Caption Mode is set On.
SOUND & LANGUAGE CONTROL Caption Option Customize the DTV/CADTV captions that appear on your screen. This function in only available when Caption Mode is set On. OPTION Move Language Enter : English Input Label Language Move : English Text Color White Key Lock : Off Key Lock : Off Text Opacity Solid Caption : Off Caption Set ID :1 Set ID Power Indicator : Home Initial Setting : On F: On 1 Service1 Mode : Home Digital Option SOUND & LANGUAGE CONTROL ■ ENTER Select O n.
TIME SETTING CLOCK SETTING Auto Clock Setup The time is set automatically from a digital channel signal. The digital channel signal includes information for the current time provided by the broadcasting station. Set the clock manually if the current time is set incorrectly by the auto clock function.
TIME SETTING Manual Clock Setup If the current time setting is wrong, reset the clock manually. TIME Move Enter TIME Move Enter Clock : Feb/21/2008 2:10 AM Clock : Feb/21/2008 2:10 AM F Off Time : Off Off Time : Off On Time : Off On Time : Off Sleep Timer : Off Sleep Timer : Off Auto Sleep : Off Auto Sleep : Off Manual Year Month 2 Date 21 Hour 2 AM Minute 10 Eastern Time Zone Daylight Saving Auto Close TIME SETTING 1 2 MENU/ SET UP Select T I M E.
AUTO ON/OFF TIME SETTING This function operates only if the current time has been set. The O f f T i m e function overrides the O n T i m e function if they are both set to the same time. The TV must be in standby mode for the O n T i m e to work. If you do not press any button within 2 hours after the TV turns on with the O n T i m e function, the TV will automatically revert to standby mode.
TIME SETTING SLEEP TIMER SETTING The Sleep Time turns the TV off at the preset time. Note that this setting is cleared when the TV is turned off. TIME Enter TIME : Feb/21/2008 2:10 AM Clock Off Time : Off Off Time : Off On Time : Off On Time : Off Clock Move Move Enter : Feb/21/2008 2:10 AM Sleep Timer : Off Sleep Timer : Off Auto Sleep : Off Auto Sleep : Off F Off G Close 1 TIME SETTING 2 MENU/ SET UP Select T I M E. ENTER Select S l e e p T i m e r.
AUTO SHUT-OFF SETTING TV will be automatically turned off, in case of no signal for 10 minutes. TIME Enter TIME : Feb/21/2008 2:10 AM Clock Off Time : Off Off Time : Off On Time : Off On Time : Off Clock Move Move Enter : Feb/21/2008 2:10 AM Sleep Timer : Off Sleep Timer : Off Auto Sleep : Off Auto Sleep : On Off On TV will be automatically turned off, in case of No Signal for 10 minutes. 1 Select T I M E. ENTER Select A u t o S l e e p.
PARENTAL CONTROL / RATINGS Parental Control can be used to block specific channels, ratings and other viewing sources. The Parental Control Function (V-Chip) is used to block program viewing based on the ratings sent by the broadcasting station. The default setting is to allow all programs to be viewed. Viewing can be blocked by choosing the type of the program and the categories. It is also possible to block all program viewing for a time period. To use this function, the following must be done : 1.
Lock System Enables or disables the blocking scheme you set up previously. LOCK Move Lock System 1 2 MENU/ SET UP 2 3 4 5 6 7 8 9 LOCK Move Lock System : On Set Password Set Password Block Channel Block Channel Movie Rating Movie Rating TV Rating-Children TV Rating-Children TV Rating-General TV Rating-General Downloadable Rating Downloadable Rating Input Block Input Block ENTER Enter Off On Select L O C K. Input the password. 0 3 Select L o c k S y s t e m.
PARENTAL CONTROL / RATINGS Set Password Change the password by inputting a new password twice. LOCK Move Lock System 1 2 MENU/ SET UP PARENTAL CONTROL / RATING 1 2 3 4 5 6 7 8 9 : Off LOCK Lock System 3 Block Channel Block Channel Movie Rating Movie Rating TV Rating-Children TV Rating-Children TV Rating-General TV Rating-General Downloadable Rating Downloadable Rating Input Block Input Block ENTER Select L O C K. Input the password.
CHANNEL BLOCKING Blocks any channels that you do not want to watch or that you do not want your children to watch. LOCK Move Lock System Enter : Off Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Downloadable Rating Input Block Block/Unblock 1 1 2 3 4 5 6 7 8 9 ENTER Input the password. Select B l o c k C h a n n e l. 4 ENTER Select a channel to block or unblock it. 5 ENTER 6 MENU/ SET UP RETURN Move Page MENU Previous RETURN Exit Select L O C K.
PARENTAL CONTROL / RATINGS MOVIE & TV RATING Movie Rating (MPAA) - Only for USA Blocks movies according to the movie ratings limits specified, so children cannot view certain movies. You can set the ratings limit by blocking out all the movies with the ratings above a specified level. Keep in mind that the movie ratings limit only applies to movies shown on TV, not TV programs, such as soap operas.
TV Rating Children - Only for USA Prevents children from watching certain children's TV programs, according to the ratings limit set. The children rating does not apply to other TV programs. Unless you block certain TV programs intended for mature audiences in the TV Rating - sub menu, your children can view those programs.
PARENTAL CONTROL / RATINGS TV Rating General - Only for USA Based on the ratings, blocks certain TV programs that you and your family do not want to view.
TV Rating English - Only for CANADA Selecting canadian english language rating system. LOCK Move Enter Blocking off : Permits all programs LOCK Move Enter E Lock System : Off Lock System : Off Set Password Set Password Block Channel Block Channel TV Rating-English TV Rating-English TV Rating-French TV Rating-French Downloadable Rating Downloadable Rating Input Block Input Block C C8+ G PG 14+ 18+ Blocking Off 1 2 MENU/ SET UP 2 3 4 5 6 7 8 9 Select L O C K.
PARENTAL CONTROL / RATINGS TV Rating French - Only for CANADA Selecting canadian french language rating system.
DOWNLOADABLE RATING This function may become available in the future and will be available only for digital channel signals. This function operates only when TV has received Region5 Rating data.
PARENTAL CONTROL / RATINGS EXTERNAL INPUT BLOCKING Enables you to block an input.
KEY LOCK The TV can be set up so that it can only be used with the remote control. This feature can be used to prevent unauthorized viewing by locking out the front panel controls. This TV is programmed to remember which option it was last set to even if you turn the TV off.
APPENDIX TROUBLESHOOTING The operation does not work normally. Check to see if there is any object between the product and the remote control causing obstruction. Ensure you are pointing the remote control directly at the TV. ■ Ensure that the batteries are installed with correct polarity (+ to +, - to -). ■ Ensure that the correct remote operating mode is set: TV, VCR etc. ■ Install new batteries.
The audio function does not work. Press the VOL or VOLUME button. Sound muted? Press MUTE button. ■ Try another channel. The problem may be with the broadcast. ■ Are the audio cables installed properly? ■ ■ Picture OK but No sound No output from one of the speakers ■ Adjust Balance in menu option. ■ A change in ambient humidity or temperature may result in an unusual noise when the product is turned on or off and does not indicate a fault with the product. ■ Check HDMI cable over version 1.3.
APPENDIX MAINTENANCE Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you enjoy your new TV. Caution: Be sure to turn the power off and unplug the power cord before you begin any cleaning. Cleaning the Screen Here’s a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until it’s almost dry, and then use it to wipe the screen.
PRODUCT SPECIFICATIONS 26LG40 (26LG40-UA) (26LG40-UG) 32LG40 (32LG40-UA) (32LG40-UG) 26.2 x 20.6 x 10.5 inches 666.8 x 524.5 x 267.0 mm 31.8 x 24.8 x 11.7 inches 808.8 x 630.3 x 299.2 mm Without stand 26.2 x 18.0 x 4.0 inches 666.8 x 457.8 x 103.0 mm 31.8 x 21.7 x 4.2 inches 808.8 x 551.6 x 108.0 mm With stand Without stand 25.1 pounds / 11.4 kg 21.6 pounds / 9.8 kg 34.1 pounds / 15.5 kg 29.7 pounds / 13.
APPENDIX PROGRAMMING THE REMOTE CONTROL The provided universal remote control can be programmed to operate most remote-controllable devices. Note that the remote may not control all models of other brands. Programming a code into a remote mode APPENDIX 108 1 Testing your remote control.
Remote Control Code VCR Brand AIWA AKAI Codes Codes Brand MAGNAVOX 031 067 012 069 101 027 031 003 033 101 045 013 013 049 151 034 024 012 048 043 053 066 133 SAMSUNG 043 046 124 146 MARANTZ 033 023 037 031 103 039 043 129 033 MARTA MATSUI MEI MEMOREX 040 033 007 108 116 135 041 010 064 110 111 117 119 MGA MINOLTA MITSUBISHI 023 039 043 053 017 031 037 131 008 025 034 046 138 009 033 109 136 012 018 063 033 033 013 066 063 072 144 147 031 050 150 034 048 012 106 027 035 101 153 010 045
APPENDIX HDSTB Brand ALPHASTAR DSR AMPLICA BIRDVIEW CHANNEL MASTER Codes 123 050 051 013 036 CHAPARRAL 008 CITOH 054 CURTIS MATHES 050 DRAKE 005 011 141 DX ANTENNA 024 ECHOSTAR 038 093 097 122 ELECTRO HOME 089 EUROPLUS 114 FUJITSU 017 133 GENERAL INSTRUMENT 003 031 HITACHI 139 APPENDIX 110 Brand 126 129 014 015 018 055 009 012 077 145 006 007 010 052 112 116 046 040 094 098 056 057 095 099 076 058 096 100 021 022 027 134 004 016 029 059 101 140 Codes HOUSTON TRACKER 033 057 HUGHES 068 JANIEL 060
IR CODES 1. How to Connect ■ Connect your wired remote control to the Remote Control port on the TV. 2. Remote Control IR Codes ■ Output waveform Single pulse, modulated with 37.
APPENDIX APPENDIX 112 (Hexa) Code Function Note 08 POWER Remote control Button (Power On/Off) D6 45 Q.
EXTERNAL CONTROL THROUGH RS-232C The RS-232C port allows you connect the RS-232C input jack to an external control device (such as a computer or an A/V control system) to control the TV’s functions externally. ■ Note: RS-232C on this unit is intended to be used with third party RS-232C control hardware and software. The instructions below are provided to help with programming software or to test functionality using telenet software.
APPENDIX RS-232C Configurations Either cable below can be used. 7-Wire Configuration (Serial female-female NULL modem cable) RXD TXD GND DTR DSR RTS CTS PC TV 2 3 5 4 6 7 8 3 2 5 6 4 8 7 D-Sub 9 D-Sub 9 3-Wire Configurations (Not standard) TXD RXD GND DSR DTR CTS RTS PC TV 2 3 5 4 6 7 8 3 2 5 6 4 7 8 D-Sub 9 D-Sub 9 RXD TXD GND DTR DSR RTS CTS Set ID Use this function to specify a TV ID number. Refer to ‘Real Data Mapping1’. G p.118.
Command Reference List COMMAND1 COMMAND2 01. Power 02. Input Select 03. Aspect Ratio 04. Screen Mute 05. Volume Mute 06. Volume Control 07. Contrast 08. Brightness 09. Color 10. Tint 11. Sharpness 12. OSD Select 13. Remote Control Lock Mode k x k k k k k k k k k k a b c d e f g h i j k l 00 ~ 01 (G p.117) (G p.117) 00 ~ 01 00 ~ 01 00 ~ 64 00 ~ 64 00 ~ 64 00 ~ 64 00 ~ 64 00 ~ 64 00 ~ 01 k m 00 ~ 01 COMMAND1 COMMAND2 19. Channel Tuning DATA (Hexadecimal) m a COMMAND1 COMMAND2 14. Treble 15.
APPENDIX Transmission / Receiving Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] : First command to control the set.(j, k, m or x) [Command 2] : Second command to control the set. [Set ID] : You can adjust the set ID to choose desired TV ID number in Setup menu. Adjustment range is 1~ 99. When selecting Set ID ‘0’, every connected TV is controlled. Set ID is indicated as decimal (1~ 99) on menu and as Hexa decimal (0x0~ 0x63) on transmission /receiving protocol.
01. Power (Command: k a) 06. Volume Control (Command: k f) To control Power On/Off of the TV. To adjust volume. Transmission [k][a][ ][Set ID][ ][Data][Cr] You can also adjust volume with the volume buttons on remote control. Data 00: Power Off Data 01: Power On Acknowledgement [a][ ][Set ID][ ][OK/NG][Data][x] Transmission [k][f][ ][Set ID][ ][Data][Cr] * Note: The TV will send the acknowledgement after power on processing completion.
APPENDIX 12. OSD Select (Command: k l) To select OSD (On Screen Display) on/off. Transmission [k][l][ ][Set ID][ ][Data][Cr] Data 00: OSD off Data 01: OSD on Acknowledgement [l][ ][Set ID][ ][OK/NG][Data][x] 18. Auto Configuration (Command: j u) To adjust picture position and minimize image shaking automatically. Auto configuration only works in RGB-PC mode. Transmission [ j ][u][ ][Set ID][ ][Data][Cr] Data 01: To set 13.
Data5: 7 Main/Sub Picture 6 Two/One Part Channel 5 Using Physical Channel 4 3 2 1 0 Step NTSC Air NTSC Cable ATSC Air ATSC Cable_std ATSC Cable_hrc ATSC Cable_irc ATSC cable_auto Reserved ... Reserved Reserved 0 Main 0 Two 0 Use x 0 0 0 0 1 Sub 1 One 1 No Use x 0 0 0 1 x 0 0 1 0 x 0 0 1 1 x 0 1 0 0 x 0 1 0 1 x 0 1 1 0 x 0 1 1 1 x x x x x x 1 1 1 1 The table above lists the binary code which must be converted to Hexadecimal before sending.
APPENDIX OPEN SOURCE LICENSE - This feature is not available for all models. GNU GENERAL PUBLIC LICENSE Version 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. the program proprietary. To prevent this, we have made it clear that any patent must be licensed for everyone's free use or not licensed at all.
b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the Program or any part there of, to be licensed as a whole at no charge to all third parties under the terms of this license.
APPENDIX 7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this license, they do not excuse you from the conditions of this license.
END OF TERMS AND CONDITIONS How to apply these terms to your new programs If you develop a new program, and you want it to be of the greatest possible use to the public, the best way to achieve this is to make it free software which everyone can redistribute and change under these terms. To do so, attach the following notices to the program.
APPENDIX GNU LESSER GENERAL PUBLIC LICENSE Version 2.1, February 1999 Copyright (C) 1991, 1999 Free Software Foundation, Inc. 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. [This is the first released version of the Lesser GPL. It also counts as the successor of the GNU Library Public License, version 2, hence the version number 2.1.
Although the Lesser General Public License is Less protective of the users' freedom, it does ensure that the user of a program that is linked with the Library has the freedom and the wherewithal to run that program using a modified version of the Library. each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this license and to the absence of any warranty; and distribute a copy of this license along with the Library.
APPENDIX 3. You may opt to apply the terms of the ordinary GNU General Public License instead of this License to a given copy of the Library. To do this, you must alter all the notices that refer to this License, so that they refer to the ordinary GNU General Public License, version 2, instead of to this License. (If a newer version than version 2 of the ordinary GNU General Public License has appeared, then you can specify that version instead if you wish.) Do not make any other change in these notices.
For an executable, the required form of the "work that uses the library" must include any data and utility programs needed for reproducing the executable from it. However, as a special exception, the materials to be distributed need not include anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component itself accompanies the executable.
APPENDIX If the library does not specify a license version number, you may choose any version ever published by the Free Software Foundation. 14.If you wish to incorporate parts of the library into other free programs whose distribution conditions are incompatible with these, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this.
MOZILLA PUBLIC LICENSE Version 1.1 --------------code which is described in the source code notice required by exhibit as original code, and which, at the time of its release under this license is not already covered code governed by this license. 1.Definitions. 1.0.1. “Commercial use” means distribution or otherwise making the covered code available to a third party. 1.1. “Contributor” means each entity that creates or contributes to the creation of modifications. 1.2.
APPENDIX (c) the licenses granted in this section 2.1(a) and (b) are effective on the date Initial developer first distributes original code under the terms of this license. (d) Notwithstanding section 2.1(b) above, no patent license is granted: 1) for code that You delete from the original Code; 2) separate from the original code; or 3) for infringements caused by: i) the modification of the original code or ii) the combination of the original code with other software or devices. 2.2. APPENDIX 3.
3.5. 3.7. Required notices. You must duplicate the notice in exhibit A in each file of the source code. If it is not possible to put such notice in a particular source code file due to its structure, then You must include such notice in a location (such as a relevant directory) where a user would be likely to look for such a notice. If You created one or more modification(s), you may add your name as a contributor to the notice described in exhibit A.
APPENDIX 7. DISCLAIMER OF WARRANTY. COVERED CODE IS PROVIDED UNDER THIS LICENSE ON AN “AS IS” BASIS, WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, WITHOUT LIMITATION, WARRANTIES THAT THE COVERED CODE IS FREE OF DEFECTS, MERCHANTABLE, FIT FOR A PARTICULAR PURPOSE OR NON-INFRINGING. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE COVERED CODE IS WITH YOU.
11. MISCELLANEOUS. This license represents the complete agreement concerning subject matter hereof. If any provision of this license is held to be unenforceable, such provision shall be reformed only to the extent necessary to make it enforceable. This License shall be governed by California law provisions (except to the extent applicable law, if any, provides otherwise), excluding its conflict-of-law provisions.
