0 (% LCD TV / DVD Combo OWNER'S MANUAL 26LG40 32 LG40 Please read this manual carefully your set and retain it for future before operating reference. Write the model number and serial number from the label on the back cabinet on the front or back of this manual.
WARNING / CAUTION WARNING/ CAUTION To prevent fire or shock this product hazards, do not expose to rain or moisture. Class B digital device This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS 0 Read these instructions. Protect the power cord from being walked on Keep these instructions. or pinched Heed all warnings. receptacles, and the point where they exit from the apparatus. particularly at plugs, convenience Follow all instructions. O Do not use this apparatus near water. Only use attachments/accessories the manufacturer. specified by Clean only with dry cloth.
SAFETY INSTRUCTIONS Never touch this apparatus or antenna a thunder or lighting storm. during O WARNING - To reduce the risk of fire or electrical shock, do not expose this product to rain, moisture or other liquids. Do not touch the TV 0 When mounting with a TV on the wall, make sure wet hands. Do not install not to install the TV by the hanging power and near flammable signal cables on the back of the TV.
@ ANTENNAS Outdoor antenna If an outdoor precautions should head antenna is installed, below. An outdoor not be located power Moving Make sure grounding follow unplugged the in the vicinity light is turned off, Do not press against or put stress on the front panel of the TV. of over- electric product may take 2 or more people to carry larger TVs. antenna system lines or other the and all cables have been removed.
CONTENTS WARNING / CAUTION SAFETY INSTRUCTIONS ............................ A .......................... 1 Input List ........................................................ 41 Input Label ..................................................... AV Mode ........................................................ 42 43 SIMPLINK ....................................................... 44 46 Accessories ...................................................... 7 Front Panel Information .....................
AutoVolume Leveler (AutoVolume) ................. 74 75 Troubleshooting ............................................ Maintenance ................................................. 104 106 Preset Sound Setting (Sound Mode) ................ 76 Product Specifications ................................... 107 Sound Setting Adjustment - User Mode ........... 77 Programing the Remote Control ..................... 108 IR Code ......................................................... 111 Clear Voice ..........
SRS(_) D I r_ _ ® I T A _° is a trademark of SRS Labs, inc. TruSurround L DOLBY XT technology Manufactured is incorporated under license from SRS Labs, Inc. under license from Dolby Laboratories. "Dolby "and the double-D symbol are trademarks of Dolby Laboratories. DIGITAL [ is a trademark of DVD format/Logo Licensing Corporation. VIDEO This product incorporates and 6,836,549, rized and other by Macrovision.
PREPARATION ACCESSORIES Ensure that the following accessories dealer where you purchased The accessories included are included with your TV. If an accessory is missing, please contact the the TV. may differ from the images below. "O _o rT1 _o © z Owner's Manual x4 CD Manual Cloth is not available for all models.) Protection Screw for stand fixing (Refer to R12) * Wipe spots on the exterior polishing cloth. Polishing Power Cord x4 Bolts for stand assembly (Refer to P.
PREPARATION FRONTPANELINFORMATION ,,,IImage shown may differ from your TV. -0 ""_NOTE: If your TV has a protection tape attached, remove the tape. And then wipe the TV with a cloth (If a polishing cloth is included with your TV, use it). _o _o © z EJECTButton -PLAY/PAUSEButton -_11 STOP Button -_ _ SKIP Button-- CHANNEL ( ^, v )Buttons VOLUME (+,-)__ Buttons ENTER Button -MENU ButtonPower/Standby INPUT Button -- Indicator Illuminates red in standby mode.
BACK PANELINFORMATION ,,,IImage shown may differ from your TV. -0 _o I-I"1 _o 0 z i!i!i!i!i O HDMI/DVI IN, HDMI IN @ DIGITAL AUDIO OUT OPTICAL Digital Connection. Supports HD video and Digital audio. Doesn't support 480i. Digital audio output theater systems. Accepts DVl video using an adapter DVl cable (not included). Includes an optical connection. @ COMPONENT Analog or HDMI to IN Connection. Note: In standby mode, these ports do not work. AUDIO Supports HD.
PREPARATION STAND INSTRUCTION ,,,IImage shown may differ from your TV. INSTALLATION _D r_ O _D Carefully cushioned DETACHMENT place the TV screen side down on a surface to protect Carefully place the TV screen side down on a cushioned surface to protect the screen from the screen from damage. damage. © z ....._ O ssemble the parts of the STAND with COVER BASE of the TV. _STAND BODY 0 Loose the bolts from TV. BODY BASE Detach the stand from TV. O Assemble the TV as shown.
CABLEMANAGEMENT ,,,IImage shown may differ from your TV. O Align the hole with the tab on the CABLE MANAGEMENT CLIP. Turn the CABLE MANAGEMENT shown. CLIP as Note: This cable management clip can be broken by excessive pressure. Connect the cables as m 0 z necessary. To connect additional equipment, see the EXTERNAL EQUIPMENT SETUP section.
PREPARATION DESKTOP PEDESTALINSTALLATION ,,,IImage shown may differ from your TV. For proper ventilation, allow a clearance of 4 inches on all four sides from the wall. -0 _o l'rl _o 4 inches © z SWIVELSTAND After installing the TV, you can adjust the TV set manually to the left or right direction by 20 degrees to suit your viewing position. •,,......._ ..........
VESA WALL MOUNTING Install your wall mount on a solid wall perpendicular contact to the floor. When attaching to other building materials, please your nearest dealer. If installed on a ceiling or slanted wall, it may fall and result in severe personal We recommend LG recommends that you use an LG brand wall mount when mounting that wall mounting be performed by a qualified injury. the TV to a wall. professional m installer.
PREPARATION SECURING THE TV TO THE WALL TO PREVENTFALLING WHEN THE TV IS USED ON A STAND ,,,IYou should purchase necessary components to prevent TV from falling off of the stand. ""_Image shown may differ from your TV. m We recommend Additionally, © z potentially Caution: that you set up the TV close to a wall so it cannot fall over if pushed backwards.
,,,ITo prevent damage do not connect to the power outlet until all connections are made between the devices. ANTENNA OR CABLE CONNECTION 1. Antenna (Analog or Digital) "O _o Wall Antenna Socket or Outdoor Antenna without m a Cable Box Connections. _o For optimum picture quality, adjust the antenna direction if needed.
EXTERNAL EQUIPMENT SETUP 01_ To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment. HD RECEIVERSETUP This TV can receive digital you do receive digital shown below. m x Component over-the-air signals from or digital a digital cable signals without set-top box or other an external digital digital external set-top box. However, if device, refer to the figure as Connection m z > m _D c 1.
HDMI Connection 1. How to connect m X O onnect the digital set-top box to HDMI/DVI 2, or 3 jack on the TV. IN1, m _o z O No separate audio connection is necessary. HDMI supports both audio and video. m x:) C "O 2. How to use m z 01_ Turn on the digital set-top box. (Refer to the owner's manual for the digital 01_ Select the HDMI1, HDMI2, or HDMI3 m set-top box.) C input source on the "O TV using the INPUT button on the remote control. HDMI-DTV 31.47 31.50 59.94 60.00 44.96 45.
EXTERNALEQUIPMENT SETUP DVI to HDMI Connection m x m _o z m X:) c "O m z m c "O 1. How to connect O Connect the DVI output of the digital O Connect the PC audio output set-top box to the HDMI/DVI to the AUDIO (RGB/DVI) IN 1,2, or 3 jack on the TV. jack on the TV. 2. How to use Turn on the digital set-top box. (Refer to the owner's manual for the digital set-top box.) Select the HDMI 1, HDMI 2 or HDMI 3 input source on the TV using the INPUT button on the remote control.
DVD SETUP Component Connection 1. How to connect O Connect the video outputs COMPONENT IN VIDEO rT1 (Y, PB, PR) of the DVD to the jacks on theTV. x Match the r_l _o jack colors (Y = green, PB = blue, and PR = red). z _> r_l Connect the audio outputs of the DVD to the COM PONENT IN AUDIO jacks on the TV. X:) c r_l z 2. How to use r_l c 01_ Turn on the DVD player, insert a DVD. "O 01_ Select Component input source by using the INPUT button on the remote control.
EXTERNALEQUIPMENT SETUP S-Video Connection 1. How to connect O onnect the S-VIDEO output VIDEO input on the TV. O onnect the audio outputs input jacks on the TV. of the DVD to the S- x r_l _o z of the DVD to the AUDIO r_l X:) c 2. How to use "O Turn on the DVD player, insert a DVD. r_l z Select the AV 1 input source on the TV using the INPUT button on the remote control. r_l Refer to the DVD player's manual for operating c instructions. "O /_il HDMI Connection 1.
VCR SETUP To avoid picture noise (interference), If the 4:3 picture format This phenomenon Antenna leave an adequate distance between the VCR and TV. is used; the fixed images on the sides of the screen may remain visible on the screen. is common to all TVs and is not covered by warranty. Connection x r_l _o z r_l X:) c "0 r_l z r_l Wall Jack c "0 Antenna 1.
EXTERNALEQUIPMENT SETUP Composite (RCA) Connection 1. How to connect O Connect the AUDIO/VIDEO VCR. Match the jack colors jacks between TV and (Video = yellow, Audio Left = white, and Audio Right = red) m x .-t m 2. How to use z Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner's manual.) m Select the AVl input source on the TV using the INPUT button on the remote control. JC) c If connected to AV IN2, select AV2 input source on the TV. m z .
OTHERA/V SOURCESETUP Camcorder 1. How to connect 0 Connect between the Video Game Set AUDIO/VIDEO TV and external jacks m X equipment. m Match the jack colors. _o z (Video = yellow, Audio Left = white, and Audio Right = red) m x:) C 2. How to use m z 01_ Select the AV2 input source on the TV using the INPUT button on the remote control. [ m 01_ If connected to AV IN 1 input, select the AV 1 C -O input source on the TV. 01_ Operate the corresponding external equipment. .......
EXTERNALEQUIPMENT SETUP AUDIO OUT CONNECTION Send the TV's audio to external audio equipment via the Audio Analog 1. How to connect m x m O Connect audio outputs to the TV's AUDIO OUT jacks. O Set the "TV Speaker option - Off" in the AUDIO menu. (@ p.79). See the external audio equipment instruction manual for operation. z m _D c m z m Digital c 1. How to connect O Connect one end of the optical cable to the TV's OPTICAL port of DIGITAL AUDIO OUT.
PC SETUP This TV provides Plug and Play capability, no display driver is needed. VGA (D-Sub 15 pin) Connection 1. How to connect m x O onnect the VGA output jack on the TV. of the PC to the RGB (PC) m z p.- O onnect the PC audio output (RGB/DVI) jack on the TV. to the AUDIO 2. How to use Turn on the PC and the TV. Select the RGB-PC input source on the TV using the INPUT button on the remote control.
EXTERNALEQUIPMENT SETUP DVI to HDMI Connection 1. How to connect m x O onnect the DVI output of the PC to the HDMI/DVI IN1,2, or 3 jack on the TV. O onnect the PC audio output (RGB/DVI) jack on the TV. m _o z m X:) c 2_ to the AUDIO "O m 2. How to use z Turn on the PC and the TV. m Select the HDMI c TV using the INPUT "O 26 1, HDMI 2 or HDMI 3 input source on the button on the remote control.
m X .-I m _o z m JO C "O m z .-I m -4 C "O Supported !!!!!!! Display Specifications 31.469 70.08 _-_ 31.469 70.08 _-_ 31.469 59.94 37.879 60.31 48.363 60.00 47.776 59.87 47.720 59.799 47.130 59.
EXTERNALEQUIPMENT SETUP Screen Setup for PC mode Selecting Resolution You can choose the resolution in RGB-PC mode. The Position, Phase, and Size can also be adjusted. m x m _o z m X:) c m z m iiIii_iiiiii!i_iiii!iii!ii!i!M!ii!iiiii!i!ii!i!i_i_iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii c "0 Select PICTURE. Select Screen (RGB-PC). Select Resolution. Select the desired resolution.
Auto Configure Automatically adjusts picture position and minimizes image instability. After adjustment, not correct, try using the manual settings or a different if the image is still resolution or refresh rate on the PC. r'_ x m z m c m z m c Select PICTURE. Select Screen (RGB-PC). 01_ If the position correct, 011_ If picture after Auto Select Auto config.. of the image is still not try Auto adjustment can adjust Phase. needs to adjustment the again.
EXTERNALEQUIPMENT SETUP Adjustment If the picture for screen Position, is not clear after auto adjustment Size, and Phase and especially if characters are still trembling, adjust the picture phase manually. This feature operates only in RGB-PC mode. m x m z m _D c m z m c Select PICTURE. _ Position: This function ture to left/right Select Screen (RGB-PC). Size, or Phase. and up/down as you prefer.
Screen Reset (Reset to original factory values) Returns Position, This feature Size, and Phase to the default factory settings. operates only in RGB-PC mode. m x m _o z m c m z m c -0 Select PICTURE. Select Screen (RGB-PC). Select Reset. Select Yes.
WATCHING TV / CHANNEL CONTROL REMOTE CONTROL FUNCTIONS When using the remote control, aim it at the remote control sensor on the TV. TV/STB/VCR Selectthe remoteoperatingmode:TV,STB,VCR,or BUILT-INDVD. /BUILT-IN DVD POWER Turns your TV or any other programmed off, depending Q.MENU equipment on or on the mode. Select the desired quick menu source. _ p.35 _h z MENU Displays the main menu. Clear all on-screen any menu.
THUMBSTICK (Up/Down/Left Right/ENTER) Navigate the on-screen menus and adjust the system settings RETURN Allows the user to move return one step in an interactive tion function. to your preference. application or other user interac- Also closes menus. SIMPLINK See a list of SIMPLINK compatible When you press this button, AV MODE Toggles through Blue Color Button The recommands devices connected the SIMPLINK to the TV. menu appears at the screen. _ p.44-45 preset picture and audio settings.
WATCHING TV / CHANNEL CONTROL TURNING ON TV @ First, connect power cord correctly. At this moment, the TV switches to standby In standby mode to turnTVon, @ pressthe mode. (b/I,INPUT, CH button on the TV or press the POWER, INPUT, Number (0~9) button on the remote control. CH(^ Select the viewing source by using the INPUT trol. 01_ This TV is programmed (^ or v) or v), button on the remote con- to remember which power state it was last set to, even if the power cord is out.
QUICK MENU / FAVORITECHANNEL SETUP Your TV's OSD (On Screen Display) Q.Menu may differ slightly (Quick Menu) is a menu of features _ Aspect Ratio: from what is shown in this manual. which users might use frequently. Selects your desired picture format. Backlight: Adjust the brightness of LCD panel to control the brightness of the screen. Favorite Channle Select your desired channel. Clear Voice: By differentiating the human sound range from others, it helps make human voices sound better.
WATCHING TV / CHANNEL CONTROL INITIAL SETTING This Function guides the user to easily set the essential purchasing the TV. It will be displayed activated from the user menus. 0_Default selection is "Home". home environment. 01_ "In-store" We recommend Mode is only intended Step1. Mode Setting for viewing the TV for the first the TV on for the first time. setting the TV to "Home" for use in retail environments. - Picture mode" manually while inspecting mode after 5 minutes.
ON-SCREENMENUSSELECTION Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual. z < N I > z z fT1 T N © Z T © For USA For Canada Display each menu. Select a menu item. Enter to the pop up menu. Return to TV viewing.
WATCHING TV / CHANNEL CONTROL CHANNELSETUP Auto Scan (Auto Automatically channel list. Tuning) finds all channels available through Run Auto Tuning again after any Antenna/Cable antenna connection or cable inputs, and stores them in memory on the changes. z < N -r" > Z Z r_l N © Z Select CHANNEL. © Select Auto Tuning. 01_ A password is required to gain access to Auto Tuning menu if the Lock System is turned on. Select Yes. Run Auto tuning. Return to the previous menu.
Add/Delete If selecting Channel (Manual DTV or CADTV input Tuning) signal, you can view the on-screen signal strength monitor to see the quality of the signal being received. N -r" z c_ < N -r" > Z Z fT1 N 0 Z Select CHANNEL. 0 Select Manual Tuning. 01_ A password is required Select DTV, TV, CADTV, or CATV. to gain access to Manual Tuning menu if the Lock System is turned on. Select channel you want to add or delete. Select Add or Delete. Return to the previous menu.
WATCHING TV / CHANNEL CONTROL Channel A custom Custom Editing list can be created List are displayed by toggling each channel on or off with the ENTER button. in black and the channels Once a channel is highlighted right corner of the screen. you can add or delete deleted from the channel The channels the Custom List are displayed by referring to the small window at the top- N -r" z < N I > z z (_ Add/Delete fT1 N © Z Select CHANNEL. © Select Channel Edit. Select a channel.
INPUT LIST Only these input signals which are connected to a TV can be activated and selected. N -r" __ _ Select the desired input source. Z Antenna ]'1 Cab,e ].[ AVl1"[ AV21"[ < Component i N -r > Z Z t HDMI3 ] (--[ HDMI2 [(1,,[ HDMI1 ](_,[ RGB-PC l(l,,,[ Built-In DVD i fT1 N © Z ie) Disconnected inactivated inputs are © (grayed out). Select a desired input source (except Built-In DVD, Antenna or Cable).
WATCHING TV / CHANNEL CONTROL INPUT LABEL You can set a label for each input source when it's not in use. N -r" z < N -r" > Z Z With using OPTION menu fT1 N 0 Z With using INPUT button Select OPTION. Select the source. Select Input Select the label. Label. _m 0 Select the source. Return to the previous menu. Select the label. Return to TV viewing Return to the previous menu. Return to TV viewing When new external device is connected, If selecting automatically.
AV MODE You can select the optimal images and sounds. -r" z < Press the AV MODE button repeatedly N -1> z z to select the desired source. N O z _m O 01_ If you select "Cinema" Cinema will be selected in AV mode, both for "PIC- TURE menu - Picture Mode" menu - Sound Mode" and "AUDIO respectively. 011_ If you select "Off" in AV mode, the "Picture Mode" and "Sound Mode" return to previous selected value.
WATCHING TV / CHANNEL CONTROL C,_ImPLInK This function The TV might operates only with devices with the not function This allows you to control properly _ImPLlnK and play other AV devices connected settings. To start using SlMPLINK, turn it on in the user menus. -r" z < N -r" > Z Z fT1 N 0 Z _m 0 Select OPTION. Select SIMPLINK. Select On or Off. Return to the previous menu. Return to TV viewing. 44 logo.
SIMPLINK Functions Direct Play: out additional _Select Disc After connecting playback: _Switch Sync off Enables you to select one of the AV devices connected Control all devices: audio-out: Power control the devices and play media with- settings. AV device: 01_ Power AV devices to the TV, you can directly connected AV devices by pressing the ^ When you power offthe TV, all connected v to TV. < > , ENTER, I_, II, I L _I_I and I_I_ buttons. devices are turned off.
DVD OPERATION NOTESON DISCS Symbol objects used in this manual on discs outside of their case may cause warping. "Q " may appear on the TV screen during operation. A "Q" means that the operation is not permitted the unit or is not available on the disc. by Structure On handling discs _ Do not touch the playback Normally, side of the disc. of disc contents DVD video discs are divided into titles, and the titles are sub-divided into chapters. and Audio CDs are divided into tracks.
CAUTION: Types of Playable Discs _ DVD (8 cm / 12 cm disc) _ Video CD (VCD) (8 cm / 12 cm disc) This Digital Video Disc Player employs a Laser System. To ensure proper please read this _ Audio CD (8 cm / 12 cm disc) In addition, this unit plays DVD -R, DVD +R, DVD -RW, DVD +RW, Kodak Picture CDs, SVCD, and CD-R / CDaudio titles, Note: Depending on the conditions MP3, and/or JPG files.
DVD OPERKI°ION @NOTE _' insert aDVD and press sToP butt0n twice tO access this DVD setup menul SELECTING LANGUAGE Selecting Select your whenever Audio preferred audio language. If an audio language you start a new disc playback. You can also select control Language during another available is selected, (The disc must contain audio language during the selected the selected playback with the AUDIO playback. Original Korean © "0 m ..
Selecting Select your Subtitle preferred played whenever Language subtitle language. If a subtitle you start a new disc playback. You can also select another available language is selected, the selected subtitle language is (The disc must contain the selected language) subtitle language with the SUBTITLE button on the remote control during playback.
DVD OPERKFION Selecting Disc OSD Language The OSD (on screen display) can be shown on the screen in your specified language. Audi o Languag e !_i_ Subtitle .......................................... Subtitle Language _ New Password Language Rating Level New Password TV Screen "/English E:I Digital Output 0 DRC IT : Move "0 m _0 _ Spanish French : Next AT 0 Z Select MENU Language. Select desired language. The menus and on screen displays appear in the selected language.
PARENTALCONTROL / RATINGS Parental Control Some movies contain control information scenes that may not be suitable that applies to the complete from I to 8, depending The parental Setup control on the country. feature for children to view. Many of these discs contain parental disc or to certain scenes on the disc. Movies and scenes are rated Some discs offer more suitable scenes as an alternative.
DVD OPERKFION Changing the password _D Digital 0 DRc........... "0 m _0 • • -.q 0 Z Select New Password. Input the password. Enter it again when requested. Return to normal playback. 52 Language Output : Move 41 : Prev .........
PICTURE SIZE CONTROL You can watch TV in various picture formats. .evel Digital Output Digital AT Output © DRC DRC :Move l_:Next AT : Move m ,,,t : Prey © z Select TV Screen. Depending Select 4:3 LB, 4:3 PS, or 1 6:9. feature on the disc, the TV screen may not be available. 4:3 LB (Letter Box) Return to normal playback.
DVD OPERKFION DIGITAL AUDIO OUTPUT You can select the output for SPDIF (Sony/Philips Each DVD disc has a variety Set the player's AUDIO of audio output options according Digital Interface). options. to the type of audio system you use. Digital DRC AT Output I- DRC : Move I_ : Next AT : Move _t : Prev O "O -4 © Z Select Digital Select Off, Output. Bitstream, or PCM. Bitstream: Select Bitstream nect DVD the Player's jack to an amplifier Return to normal playback.
DYNAMIC RANGE COMPRESSION (DRC) Confines the audio range to prevent excessively loud sound yet allows you to hear the low sounds clearly. ta! Output v Off AT : Move _ : Next On DRC AT I_ : Move _t : Prev On © -O r_ _o © z Select DRC. Select Off (Decrease the DRC range) or On (Reset the DRC range to original values). With the DVD format, program's soundtrack you can hear a in the most accu- rate and realistic presentation Return to normal playback.
DVD OPERATION PLAYING A DVD OR VIDEO CD Fast Forward/Backward Basic Playback Press this button Turn TV on. during playback. Select the required Slide your chosen X2, X4, X8, X16 orX32 disc into the disc slot the ....................... then it may happen the kind of the mechanical C7 O "O r_ Return to normal playback. i _ If there are scratches on the DVD or CD Disc, _D noise a little, i i Slow Motion i LOW-_,,_/YSLOW + _,_ Stop playback.
Still Picture and Frame-by-Frame Playback Title Menu (DVD only) Press this button during playback. Press this button during playback. Select the desired item. Press this button Press it repeatedly during playback. to advance the picture frame-by-frame. The TV may not be able to select the disc or title menu depending Exit still motion on a sort of DVD disc. mode.
DVD OPERKflON Subtitles A-B Repeat Playback A-B repeat between playback allows you to repeat two selected material Press it during points. ent subtitle playback to see the differ- languages. Select the start point during back. " _) A" is displayed the starting on TV screen and point of your selected seg- Zoom ment is set up. Select the end point. "_ < AB" is displayed When enlarging on TV screen and the ending point is set up. starts at the Playback m selected.
MP3 OPERATION Move to another Track MP3 Files Playback Options 1 When inserted, automatically (directory) the MP3 depending menu screen appears Press it briefly during playback to go to the next track or to return to on the MP3 disc's folder structure. the beginning Press it twice of the current briefly track. to go back to the previous track. Repeat Playback You can play a specific < track repeatedly. © Select desired folder. m _D > Use this button during playback.
DVD OPERKFION AUDIO CD OPERATION On-Screen Display Repeat Playback You can display the Track, and Playback on the TV screen. time status You can play a specific Press this button during playback. Press it repeatedly mation: Single Use this button during playback. to change track infor- Elapsed, Single track repeatedly. Press it repeatedly Remain, to change the repeat mode: Track, All, Repeat Off. Total Elapsed, or Total Remain. Move to another Track Track Number 0 Playing Time "0 _0 .
JPGFILEVIEWING OPTIONS As a JPG file is loaded, appears the table of contents on the TV screen. Rotation Picture Selection Rotate a JPG file clockwise or counter clockwise during showing a picture. Select the desired picture. The selected JPGfile appears as shown. Repeat Playback You can show JPG files repeatedly. © m Use this button during playback. _D Press it repeatedly to change the repeat mode: Shuffle, Random, Repeat One, © z Repeat All, Repeat Off. Start Slide show mode.
PICTURE CONTROL PICTURE SIZE (ASPECT RATIO) CONTROL This feature lets you choose the way an analog picture with a 4:3 aspect ratio is displayed on your TV. "O N C _o m N © Z _o © Select PICTURE. _ You can also adjust Aspect the Q-Menu. Select Aspect Ratio. Select the desired picture format. Return to the previous menu. Return to TV viewing.
Set by program Zoom 1 Selects the proper picture proportion to match the source'simage. Choose Zoom 1 when you want to view the pic- (4:3"* ture without bottom 4:3) any alteration. portions However, the top and of the picture will be cropped. m v.. ..................... m _u (16:9--_ 16:9) "O Zoom 2 N Choose Zoom 2 when you want the picture to be altered, both The picture alteration vertically taking extended and cropped. a halfway trade off between and screen coverage.
PICTURECONTROL PRESETPICTURE SETTINGS Picture Mode - Preset There are factory setting manually. presets for picture settings available in the user menus. You can use a preset, change each "O N C _o N © Z _o © Select PICTURE. Select Picture Mode. 01_ Vivid, Game Standard, Settings mum picture Select Vivid, Sport, Standard, or Game. Return to the previous menu. Return to TV viewing.
Color Tone - Preset Choose one of three automatic color adjustments. cool to see less intense colors with more blue. Set to warm to enhance hotter colors such as red, or set to c © Z © Select PICTURE. Select Advanced Select Color Select Cool, Medium, Control. Temperature. or Warm. Return to the previous menu. Return to TV viewing.
PICTURECONTROL MANUAL PICTUREADJUSTMENT Picture Mode - User Mode Adjust the picture appearance to suit your preference and viewing situations. "O N C _o m N O Z _o O Select PICTURE. Select Picture Select Vivid, Mode. Standard, Select Backlight, Sharpness, Contrast, Color, Make appropriate 66 or Tint. adjustments. Return to the previous menu. Return to TV viewing. Cinema, Sport, Brightness, or Game.
Picture Mode - Expert Control By segmenting fit, offering categories, the optimal Expert1 picture and Expert2 quality provide more categories which users can set as they see for users. "O N C m N O Z O Select PICTURE. Select Picture Mode. Select Expert1 or Expert2. Select Expert Control. Select your desired menu option. Make appropriate adjustments. Return to the previous menu. Return to TV viewing.
PICTURECONTROL PICTURE IMPROVEMENT TECHNOLOGY Fresh Contrast: Fresh Color: Adjusts Noise Reduction: Gamma: Optimizes the contrast the color automatically of the reflection Removes interference High gamma values display according automatically up to the point whitish "O C m N O Z O Select PICTURE. Control. Select Fresh Contrast, Fresh Color, Noise Reduction, or Gamma. Select your desired options. Return to the previous menu. Return to TV viewing. 68 to reproduce of the reflection.
ADVANCED CONTROL- BLACK (DARKNESS) LEVEL Adjusting the contrast This feature is disable and the brightness of the screen using the black level of the screen. in DTV and RGB-PC mode. "O _h C _o m _h © Z _o © Select PICTURE. Select Advanced Control. 01_ Low: The reflection darker. of the screen gets 01_ High: of the screen gets The reflection brighter. 01_ Auto: Select Black Level. Realizing the black level of the screen and set it to High or Low automatically. Select Low or High.
PICTURECONTROL ADVANCEDCONTROL- EYECARE Dims extremely This feature bright is disabled pictures. in "Picture Mode-Vivid, c _D m © z _D © Select PICTURE. Select Advanced Select Eye Control. Care. Select On or Off. Return to the previous menu. Return to TV viewing. 7O Cinema".
ADVANCED CONTROL- REALCINEMA Set up the TV for the best picture When you operate Real Cinema appearance (3:2 Pull-Down for viewing Mode movies. or Cinema Correction Mode), the TV will adjust 24 fps video from movies to 30 fps video for display. This feature operates only in TV (Analog and HDMI 1080i mode. TV/CATV, Digital DTV/CADTV), AVl, AV2, Component 480i/1080i, -O N C _o m N O Z _o O Select PICTURE. Select Advanced Select Real Control. Cinema. Select On or Off.
PICTURECONTROL PICTURE RESET Settings of the selected picture modes return "O N C m N O Z O Select PICTURE. Select Reset. Initialize the adjusted value. Return to TV viewing. 72 to the default factory settings.
POWER INDICATOR -4 C m © z .-t © Select OPTION. Select Power Select Standby Indicator. Light or Power Light. 01_ Standby brightness Light: You can set the of the LED on the front side of the TV during power standby. Select your desired options. 0101_ Power Light: You can set the the LED on the front side of the TV to be turned on or off while watching the TV. Return to the previous menu. Return to TV viewing.
SOUND & LANGUAGE CONTROL AUTO VOLUME LEVELER(AUTO VOLUME) Auto Volume makes sure that the volume level remains consistent whether you are watching a commercial or a regular TV program. 0 C z z C 1-11 Select AUDIO. N 0 z .-I Select Auto Volume. 0 Select On or Off. Return to the previous menu. Return to TV viewing.
CLEAR VOICE By differentiating the human sound range from others, it improves the sound quality of voices. 0 c Z Select AUDIO. z c Select Clear Voice. l'rl N 0 Z .-I Select 0 n or Off. Return to the previous menu. 0 0_If you select TruSurround "Clear Voice-On': SRS XT feature will not work. Return to TV viewing. 0_0_ You can also adjust Clear Q-Menu.
SOUND & LANGUAGE CONTROL PRESETSOUND SETTINGS (SOUND MODE) Sound Mode sound options Standard, lets you enjoy the best sound based on the program Music, Cinema, without any special adjustment as the TV sets the appropriate content. Sport, and Game are preset for optimum sound quality at the factory and are not adjustable. 0 c Z z c l'rl N 0 Z .-I Select AUDIO. 0 Select Sound Mode. f_l_ You can also adjust Sound the Q. Menu. Select Standard, Cinema, Sport, Music, or Game.
SOUND SETTING ADJUSTMENT- USER MODE Adjust the sound to suit your taste and room situations. Select AUDIO. Make appropriate adjustments. O c Z Select Sound Mode. _o Return to the previous menu. z Select Standard, Cinema, Music, Sport, Return to TV viewing. c or Game. l'rl Select Treble N 0 Z .-I or Bass. 0 SRS TRUSURROUND XT Select AUDIO. Select SRS TruSurround Select On or Off. XT. SRS TruSurround any multi-channel Return to the previous menu.
SOUND & LANGUAGE CONTROL BALANCE Adjust the left/right sound of speaker to suit your taste and room situations. 0 c Z _o z Select AUDIO. c l'rl Select Balance. N 0 Z .-I 0 Make appropriate Return to the previous menu. Return to TV viewing. 78 adjustments.
TV SPEAKERSONIOFF SETUP Turn the TV speakers off if using external audio equipment. 0 c z _o z c Select AUDIO. Select TV Speaker. l'rl N 0 Z .-I 0 Select 0 n or Off. Return to the previous menu. Return to TV viewing.
SOUND & LANGUAGE CONTROL AUDIO RESET Settings of the selected Sound Mode return 0 c Z z c Select AUDIO. l'rl N 0 Z .-I Select Reset. 0 Initialize the adjusted value. Return to TV viewing. 8O to the default factory settings.
STEREO/SAPBROADCASTSETUP For Analog only: This TV can receive MTS stereo programs and any SAP (Secondary Audio Program) that accompanies the stereo program if the station transmits an additional sound signal. Mono sound is automatically used if the broadcast is only in Mono. 0 c Z _o z c l'rl Analog TV N 0 Z .-I Digital TV 0 Select SAP. Select Mono, Stereo, Select Multi Audio. or SAP. Select other languages. Return to TV viewing. Return to TV viewing.
SOUND & LANGUAGE CONTROL AUDIO LANGUAGE Other languages may be available if a digital signal is provided This feature operates only in DTV/CADTV O c Z _o z c l'rl N 0 Z .-I Select OPTION. Select Language. 0 Select Audio. Select your desired language: English, Spanish, or French Return to the previous menu. Return to TV viewing. 82 mode. by the broadcasting station.
ON-SCREEN MENUS LANGUAGE SELECTION The menus can be shown on the screen in the selected language. 0 c z z c Select OPTION. l'rl N 0 Z .-I Select Language. 0 Select Menu. Select your desired language. From this point on, the on-screen menus will be shown in the selected language. Return to the previous menu. Return to TV viewing.
SOUND & LANGUAGE CONTROL CAPTION MODE Analog Caption tioning Broadcasting must be provided information to help people with hearing if provided and is usually the program's digital System Captions on a program. dialog. Caption/Text, and analog channels on the Antenna/Cable. which was last set when you turned loss watch TV. Select a caption Analog caption if provided displays information by the broadcaster, This TV is programmed the power off.
Digital Choose Other Broadcasting the language System Captions you want the DTV/CADTV Languages can be chosen for digital This function in only available when Caption Captions to appear in. sources only if they are included on the program. Mode is set On. 0 c z Select OPTION. z c Select Caption. l'rl N 0 Z .-I Select 0 n. 0 Select CC1-4, Text1-4, Service1 - 6. or Return to the previous menu. Return to TV viewing.
SOUND & LANGUAGE CONTROL Caption Option Customize the DTV/CADTV This function captions in only available that appear when Caption on your screen. Mode is set On. O c Z _o Select OPTION. 01_ Size: z c Select Caption l'rl N 0 Z .-I Set the word size. 01_ Font: Select a typeface 0_Text Color: Choose for the text. a color for the text. 01_ Text Opacity: Specify the opacity for the text color. Select O n. 01_ Bg (Background) background color. 0 Select Digital Option.
TIME SETTING CLOCK SETTING Auto Clock Setup The time is set automatically The digital channel signal Set the clock manually from a digital includes if the current channel information signal. for the current time is set incorrectly time provided by the broadcasting station. by the auto clock function. Select TIME. m z Select Clock. Select Auto. Select your viewing area time zone. • U.S.A: Eastern, Central, Pacific, Alaska, or Hawaii.
TIME SETTING Manual Clock Setup If the current time setting is wrong, reset the clock manually. Select TIME. m m z c_ Select Clock. Select Manual. Select the Year, Month, Date, Hour, or Minutes option. Set the Year, Month, Date, Hour, or Minutes option. Return to the previous menu. Return to TV viewing.
AUTO ON/OFF TIME SETTING This function The Off Time operates only if the current function overrides The TV must be in standby time has been set. the On Time mode for the On If you do not press any button within automatically mode. revert to standby function Time if they are both set to the same time. to work. 2 hours after the TV turns on with the On 01_ To cancel On/Off Select TIME. Time Time function, function, the TV will select Off.
TIME SETTING SLEEPTIMER SETTING The Sleep Time turns the TV off at the preset time. Note that this setting is cleared when the TV is turned off. Select TIME. Select Sleep Timer. m z Select Off, 1 O, 2 O, 3 O, 6 O, 9 O, 120, 180, or 240 minutes. Return to the previous menu. Return to TV viewing. 9O ,i,_You can also adjust Sleep the Q.Menu.
AUTO SHUT-OFF SETTING TV will be automatically turned off, in case of no signal for 10 minutes. Select TIME. Select Auto Sleep. m m Select 0 n or Off. z Cl Return to the previous menu. Return to TV viewing.
PARENTALCONTROL / RATINGS Parental Control can be used to block specific channels, ratings and other viewing sources. The Parental Control Function (V-Chip) is used to block program viewing based on the ratings sent by the broadcasting station. The default setting is to allow all programs to be viewed. Viewing can be blocked by choosing the type of the program and the categories. this function, the following It is also possible to block all program viewing for a time period.
Lock System Enables or disables the blocking '/>/_ scheme you set up previously. @ Select LOCK. Input the password. _o m z Select Lock System. N © z Select O n or Off. 01_ When you select O n, the Lock System is enable. _o © _o Return to the previous menu. z Return to TV viewing.
PARENTALCONTROL / RATINGS Set Password Change the password by inputting a new password twice. Select LOCK. Input the password. m z Select Set password. N O z Choose any 4 digits for your new password. O As soon as the 4 digits are entered, the same 4 digits on the Confirm. z c_ Return to the previous menu. Return to TV viewing.
CHANNEL BLOCKING Blocks any channels that you do not want to watch or that you do not want your children Block/Unblock MENU/ _u_ _:_ Move CH Move Page Previous to watch. R_T_ Exit _J _ ,2 Input Select LOCK. the password. m z Select Block Channel. Select a channel to block or unblock N O z O it. Block or unblock a channel. z Return to the previous menu. Return to TV viewing.
PARENTALCONTROL / RATINGS MOVIE & TV RATING Movie Rating (MPAA) - Onlyfor Blocks movies according set the ratings limit the movie ratings USA to the movie ratings limits specified, by blocking so children out all the movies with the ratings cannot view certain above a specified limit only applies to movies shown on TV, not TV programs, movies. You can level. Keep in mind that such as soap operas. Select LOCK. _o 01_ G (General audience) Input the password.
TV Rating Children - Onlyfor Prevents children from watching rating does not apply to other certain children's TV programs. ences in the TV Rating - sub menu, your __ USA TV programs, Unless you block children can view those according certain to the ratings limit set. The children TV programs intended for mature audi- programs. Select LOCK. _o Input the password. m z N 0 z Select TV Rating-Children. 01_ Age (applies to TV-Y, TV-Y7) Select Age or Fantasy Violence.
PARENTALCONTROL / RATINGS TV Rating General - Onlyfor USA Based on the ratings, blocks certain TV programs that you and your family do not want to view. Select LOCK. Input the password. _D m z Select TV Rating-General. N 0 z _D 0 01_ Age (applies Select Age, Dialogue, Sex or Violence. Language, to TV-G,TV-PG,TV-14,TV- MA). 01_ Dialogue-sexual (applies to language (applies to TV-PG,TV- 14). _D 01_ Language-adult z dialogue Select block options. TV-PG, TV-14, TV-MA).
TV Rating English - Onlyfor CANADA Selecting SETUP canadian _ ',,_/_ english language rating system. Select LOCK. o,_ E (Exempt) Input the password. o,_ C (Children) 01_ C8+ (Children eight years and older) 01_ G (General programming, Select TV Rating-English. suitable for m z all audiences) 0101_ PG (Parental Guidance) Select E, C, C8+, _u G, P G, 1 4+, 1 8+, or Blocking Off.
PARENTALCONTROL / RATINGS TV Rating French - Onlyfor CANADA Selecting canadian french language rating system. Select LOCK. 0,_E (Exempt) Input the password. 0,_G (General) 01_ 8ans+ rrl z Select TV Rating-French. N O z O (General-Not convenient for lit- tle children) 01_1Sans+ (Not convenient for children of 13 years and younger) Select E, G, 8ans+, 1 6ans+, 1 8ans+, 01_16ans+ (Not convenient 1 3ans+, or Blocking off.
DOWNLOADABLE RATING This function may become This function operates available in the future only when TV has received and will be available Region5 only for digital channel signals. Rating data. 01_ Based on rating table, your TV's OSD (On Screen Display) may differ slightly from what is shown in this manual. _D m z _ Select LOCK. 0 z Input the password. _D 0 Select Downloadable Rating. _D z c_ Select desired Downloadable Rating option. Select desired option and block it.
PARENTALCONTROL / RATINGS EXTERNAL INPUT BLOCKING Enables you to block an input. Select LOCK. m z N 0 z Input the password. Select Input Block. 0 Select input source. z Select On or Off. Return to the previous menu. Return to TV viewing.
KEY LOCK The TV can be set up so that it can only be used with the remote This feature can be used to prevent This TV is programmed to remember unauthorized which option control. viewing by locking out the front panel controls. it was last set to even if you turn the TV off. Select OPTION. rT1 z Select Key Lock 0_In Key Select O n or Off. Lock if the TV is turned off, press the dD/ I, INPUT, CH ^ v button on the TV or POWER, INPUT, CH ^ v or NUMBER buttons on the remote control.
APPENDIX TROUBLESHOOTING Check to see if there is any object between the product causing obstruction. and the remote control Ensure you are pointing the remote control Ensure that the batteries Ensure that the correct are installed with correct remote operating polarity directly at the TV. (+ to +, - to -). mode is set: TV, VCR etc. Install new batteries. Is the sleep timer set? Check the power control I,I,ICheck whether settings. the product is turned I,I,ITry another channel.
mm_ Press the VOL or VOLUME button. i,i,iSound muted? Press MUTE button. mini Try another channel. The problem i,i,iAre the audio cables installed may be with the broadcast. properly? i,i,iAdjust Balance in menu option. i,i,iA change in ambient when the product humidity is turned or temperature may result in an unusual noise on or off and does not indicate a fault with the product. Check HDMI cable over version 1.3. Check USB cable over version 2.0.
MAINTENANCE Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you enjoy your new TV. Caution: Be sure to turn the power off and unplug Cleaning O the power cord before you begin any cleaning. the Screen Here's a great way to keep the dust offyour water and a little fabric softener screen for a while. Wet a soft cloth in a mixture of lukewarm or dish washing detergent. Wring the cloth until it's almost dry, and then use it to wipe the screen.
PRODUCT SPECIFICATIONS 26.2 x 20.6 x 10.5 inches 31.8 x 24.8 x 11.7 inches 666.8 x 524.5 x 267.0 mm 808.8 26.2 x 18.0 x 4.0 inches 666.8 x 45Z8 x 630.3 x 299.2 mm 31.8 x 21.7 x 4.2 inches x 103.0 mm 808.8 x 551.6 x 108.0 mm 25.1 pounds / 11.4 kg 34.1 pounds / 15.5 kg 21.6 pounds / 9.8 kg 29.7 pounds / 13.
PROGRAMMING THE REMOTE CONTROL The provided universal remote control Note that the remote may not control Programming O can be programmed to operate most remote-controllable devices. all models of other brands. a code into a remote mode Testing your remote control. To find out whether component your remote control can operate other such as a STB and press the corresponding trol, while pointing at the component. responds If the component correctly.
Remote Control Code VCR 034 AKAI 016 043 i25 i46 046 124 MARANTZ 033 067 068 012 072 034 031 033 041 067 069 031 033 103 012 023 039 BROKSONIC 03S 037 129 DYNATECH 034 053 MATSUI NEC 006 017 029 031 025 036 037 046 129 13i i38 003 008 009 034 033 109 063 144 120 122 048 135 007 010 014 031 033 102 134 024 034 056 057 012 023 077 078 149 033 034 039 043 058 076 034 STS 0S3 0S4 066 070 074 133 140 145 PENTAX 115 043 043
HDSTB ALPH 123 AMPLICA 050 BI_DVIEW 031 126 129 CHANNEL MASTER 013 014 015 036 055 008 009 CH CITOH CURTI ES DRAKE H 012 018 060 039 051 ,RbS 0Z2 RCA 066 P,EAESTC 043 074 SAMSUNG 147 106 123 028 085 035 047 037 054 LEGEND 057 SCIENTIFICATLANTA 032 0_50 14_5 LG 001 132 SON_ STARCAST 103 041 SUPER GUIDE 020 124 125 TEECOM 023 026 075 087 088 137 090 107 130 00.
IR CODES 1. How to Connect 01_ Connect your wired remote control 2. Remote Control 0_Output to the Remote Control port on the TV. IR Codes waveform Single pulse, modulated with 37917KHz signal at 455KHz L I- Tc Carrier frequency FCAR = 1/TC = fOSC/12 Duty ratio = T1/TC = 1/3 0_Configuration 1 st frame of frame Low custom code High custom Data code code Data code Repeat frame I I m Repeat code 4 Tf 0_Lead code J -O -O m 9 ms F z x 0_Repeat code 0.
MENU Remote control Button C4 POWER ON Discrete IR Code POWER OFF Discrete IR Code (Only Power Off) 09 FLASHBK Remote control Button MUTE Remote control Button VOL + Remote control Button VOL g 01 Remote control CH v Remote Control Button FAV Remote control 07 < Remote control ......
EXTERNAL CONTROL THROUGH RS-232C The RS-232C port allows you connect the RS-232C or an A/V control system) 01_ Note: RS-232C on this unit is intended The instructions software. RS-232C to control below are provided input jack to an external control the TV's functions device (such as a computer externally. to be used with third to help with programming party RS-232C software control hardware and software.
RS-232C Configurations Either cable below can be used. PC TV TV RXD TXD RXD TXD TXD RXD TXD RXD GND GND GND GND DTR DSR DTR DTR DSR RTS DTR CTS DSR RTS DSR RTS CTS RTS CTS CTS D-Sub 9 D-Sub 9 Set ID Use this function to specify a TV ID number. Refer to 'Real Data Mapping1 '. _ p.1 1 8. m z x Select OPTION. Select Set ID. Choose the desired TV ID number. The adjustment 1 -99. range of Set ID is Return to the previous menu.
Command Reference List k a x b l__ p.117) k c (_ p.117) 04 Screen Mute k d 00 ~ 01 1Z Color Temperature ume Mute k e 00 - 01 1 k f 00 ~ 64 20. Channel Add/Del k g 00 - 64 21 08. Brightness k h 00 ~ 64 22. Backlight O k i 00 - 64 k j O0 ~ 64 k k O0 - 64 k I O0 ~ 01 m O0 - 01 02. Input Select O 06. Volume Control or 10. Tint ]2. OSD Select !i!i!i!i!i! m 00 ~ 01 physical program high 1 e k r 00 ~ 64 15.
Transmission / Receiving Protocol i¸i i¸ii¸i i¸i i¸i i¸ii¸i i¸i i¸i!i_i ¸i¸i¸ ii̧¸i!iiil ¸iiii!!i iii!!i!_ !¸¸!I¸! iJi ii_il¸I i!!!!!!!_i!i iiiii¸!!_ii!_ iii! i!!i_i¸i_ill iiiii¸ii¸i I!II¸ i¸i_i!i_i_ili_i !ii!iiiiiiii iili i_!i ¸_i!ii i_ii_i i¸¸¸i¸¸i¸i¸ i jliiiiiiiiiiiiiiiii_!i_!!_ililililili_i_iiiililiiii!_!!ilJ!!!_i ii!iiliii_i i ii!!i!i! !iiiiiiiiiii_ ii̧ i¸!i_ii_iiiiiiiii ¸_iii i_ _:ii̧¸il¸i!¸iiiiiii!ii!_ii!i! i!i!i!i! i_!i_i_iiiililiiii_ii_i!_!i_ iiii!_iii ¸¸iiiiiiiii iiliiliiiiiiiiiiiiii!!i ¸_ !!!il
01. Power (Command: To control 06. Volume Control k a) Power On/Off You can also adjust volume with the volume buttons on Transmission [k][a][ ] [Set:ID] [ ] [Data][cr] remote control. Data 01: Power On [a][ ACknowledgemen_ ][Se_ ID][ ] [OK/NG] [Data] [x] * Note: The TV will send the acknowledgement power on processing after completion. acknowledgement. input Select Transmission [k] [f] [] Data Min: O0 - Max: 64 (*transmit Acknowledgement[f] 07.
12. OSD Select (Command: k I) 1 8. Auto Configuration To select OSD (On Screen Display) on/off. To adjust Transmission[k] [I][][Set!D][ ][Data][Cr] automatically. Data 00: OSD off Acknowledgement[I] Data 01 :OSD [] [Set ID] [] position j u) and minimize image shaking Auto configuration only works in RGB-PC mode. on [OK/NG] picture (Command: [Data] [x] Transmission [i] [u][] [Set !D] [ ] [Data] [Cr] Data 01 : To set 13.
Data 5: The table above lists the binary code which must be converted to Hexadecimal 20. Channel Add/Del (Command: m b) To add and delete the channels. before sending. For example: The binary code to tune the sub source to an NTSC TransmissiOn [m] [b] [ ] [Set ID] [ ] [Data] [Cr] cable channel is "1000 Data 00: Channel Delete 0001 ", which translates to "81" in Hex.
OPEN SOURCE LICENSE- This feature is not available for all models. GNU GENERAL PUBLIC LICENSE Version 2, June Copyright (C) 1989, 1991 Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA Everyone is permitted to copy and distribute verbatim this license document, but changing it is not allowed. 1991 the program proprietary. To prevent this, we have made it clear that any patent must be licensed for everyone's licensed at all.
b) You must cause any work that you distribute that in whole or in part contains or publish, or is derived c) Accompany from the it with the information offer to distribute corresponding you received as to the source code. (This alter- Program or any part there of, to be licensed as a whole at native is allowed only for noncommercial no charge to all third license.
If, as a consequence of a court patent infringement patent issues), conditions judgment or for any other or allegation of reason (not limited to are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this license, they do not excuse you from the conditions of this license.
END OF TERMS AND CONDITIONS Also add information on how to contact you by electronic and paper mail. How to apply these terms to your new programs If you develop a new program, and you want it to be of the greatest possible If the program is interactive, make it output this when it starts in an interactive mode: a short notice like use to the public, the best way to achieve this is to make it free software which everyone can redistribute under these terms.
GNU LESSER GENERAL PUBLIC LICENSE Version 2.1, February 1999 Copyright (C) 1991, 1999 Free Software Foundation, Inc. 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA To protect Everyone is permitted ified by someone else and passed on, the recipients to copy and distribute this license document, [This is the first counts verbatim copies of but changing it is not allowed. released version of the Lesser GPL.
Although the Lesser General Public License is Less protective of the users' freedom, it does ensure that the user of a program that each copy an appropriate is linked with the Library has the freedom and the wherewithal and to the absence of any warranty; and distribute warranty; to run that program using a modified version of the Library. The precise terms and conditions for copying, distribution and with the library in order to run. a in exchange for a fee. 2.
3. You may opt to apply the terms of the ordinary GNU General the object file is unrestricted, regardless of whether it is legal- Public License instead of this License to a given copy of the ly a derivative work. Library. To do this, you must alter all the notices that refer to plus portions of the library will still fall under Section 6.
For an executable, the library" the required ed for reproducing cial form of the "work that uses must include any data and utility exception, the executable from it. However, as a spe- the include anything materials to be distributed that is normally distributed and so on) of the operating runs, unless that cutable. of other (compiler, itself proprietary the operating accompanies contradicts kernel, the exe- the license libraries that do not normal- system.
If the library does not specify a license version number_ you may choose any version ever published Foundation. 14.1f you wish to incorporate To apply these terms, attach the following notices to the library. It is safest to attach them to the start of each source file to most effectively parts of the library into other free programs whose distribution these, write to the author by the Free Software conditions are incompatible to ask for permission.
MOZILLA PUBLIC LICENSE Version 1.1 1 •Definitions• code which is described in the source code notice required by exhibit as original code, and which, at the time 1.0.1. "Commercial use" means distribution the covered code available to a third 1.1. or otherwise making of its release under party. "Contributor" means each entity that tributes to the creation of modifications• this license is not already covered code governed by this license. creates or con- 1.lO.l .
(c) the licenses granted effective in this section 2.1 (a) and (b) are on the date Initial developer original You may not offer or impose any terms on any source code first distributes version that code under the terms of this license. you (d) Notwithstanding section 2.
3.Z (c) Representations. contributor represents that, except as disclosed You may create a larger work by combining with other code not governed modifications are contributor's and/or contributor has sufficient and distribute original creation(s) rights to grant the rights Required notices. covered code by the terms of this license the larger work as a single product. In such a case, you must make sure the requirements license are fulfilled for the covered code. by this license. of this 4.
Z DISCLAIMER OF WARRANTY. COVERED such participant CODE IS PROVIDED UNDER THIS ON AN "AS IS" BASIS, WITHOUT KIND, EITHER WITHOUT sold, distributed, INCLUDING, THE ENTIRE RISK AS TO THE QUALITY or had made, modifications made by that participant. COVERED CODE 8.3. AND PERFOR- MANCE OF SHOULD ANY COVERED CODE PROVE DEFECTIVE IN IS WITH YOU.
11. MISCELLANEOUS• EXHIBIT A -Mozilla Public License• This license represents the complete agreement concerning subject matter hereof. If any provision held to be unenforceable, of this license is such provision shall be reformed only to the extent necessary to make it enforceable• License shall be governed by California (except to the extent applicable erwise), excluding its This law provisions The contents of this file are subject to the Mozilla Public License Version 1.