OWNER'S MANUAL IPS LED MONITOR (LED MONITOR*) *LG LED Monitors are LCD Monitors with LED Backlighting. Please read the safety information carefully before using the product. IPS LED Monitor (LED Monitor) Model List 25UM58 29UM58 34UM58 www.lg.
Contents ENGLISH ENG CONTENTS 3 4 LICENSE ASSEMBLING AND PREPARING 21 - -General 22 - -Reset 23 - -Picture mode 24 TROUBLESHOOTING 4 Product Components 5 Component and Button Description 6 Moving and Lifting the Monitor 26 SPECIFICATIONS 7 Installing the Monitor 26 25UM58 7 - Assembling the stand base 27 29UM58 8 - Using the cable holder 28 34UM58 9 - Detaching the stand base 29 Factory support mode 11 - Installing onto a table 29 HDMI Timing (Video) 12 - Adjustin
LICENSE 3 Each model has different licenses. Visit www.lg.com for more information on the license. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
ASSEMBLING AND PREPARING ASSEMBLING AND PREPARING ENGLISH ENG Product Components Please check whether all the components are included in the box before using the product. If there are missing components, contact the retail store where you purchased the product. Note that the product and components may look different from those shown here.
ASSEMBLING AND PREPARING 5 Component and Button Description ENG ENGLISH Power Indicator yyOn: power is on yyOff: power is off (Power Button) Ports
ASSEMBLING AND PREPARING Moving and Lifting the Monitor ENGLISH ENG When moving or lifting the monitor, follow these instructions to prevent the monitor from being scratched or damaged and to ensure safe transportation regardless of its shape or size. CAUTION As far as possible, avoid touching the moniyy tor screen. This may result in damage to the screen or some of the pixels used to create images.
ASSEMBLING AND PREPARING Installing the Monitor 4 Attach the screw cover. ENG ENGLISH Assembling the stand base 25UM58 1 Place the screen face down. CAUTION To protect the screen from scratches, cover yy the surface with a soft cloth. 2 Check the direction of the stand body (front, back) and then mount the stand body onto the stand hinge. Tighten two screws into the back of the stand body . Screws Stand Body 3 Stand Hinge 1 Attach the Stand Base to Stand Body. 2 Tighten the screw to the right.
ASSEMBLING AND PREPARING 29UM58 34UM58 4 Attach the screw cover. ENGLISH ENG 1 Place the screen face down. CAUTION To protect the screen from scratches, cover yy the surface with a soft cloth. Screw Cover 2 Check the direction of the stand body (front, back) and then mount the stand body onto the stand hinge. Tighten two screws into the back of the stand body . Screws CAUTION Applying excessive force when tightening the screws may cause damage to the monitor.
ASSEMBLING AND PREPARING Detaching the stand base 3 Remove the two screws on the back of stand As shown in the illustration, disconnect the stand body from the stand hinge. 1 Place the screen face down. Screws CAUTION To protect the screen from scratches, cover yy the surface with a soft cloth. 2 Remove the screw cover. Stand Body 4 1 Turn the screw to the left. 2 Pull out the Stand Base. Stand Body Stand Base ENG ENGLISH body.
ASSEMBLING AND PREPARING 29UM58 34UM58 4 ENGLISH ENG 1 Turn the screw to the left. 2 Pull out the Stand Base. 1 Place the screen face down. Stand Body CAUTION To protect the screen from scratches, cover yy the surface with a soft cloth. 2 Remove the screw cover. Screw cover Stand Base CAUTION 3 Remove the two screws on the back of stand body. As shown in the illustration, disconnect the stand body from the stand hinge.
ASSEMBLING AND PREPARING Installing onto a table 11 2 Connect the adapter to the monitor, then plug 1 Lift the monitor and place it on the table in an upright position. Place at least 100 mm (3.94 inches) away from the wall to ensure sufficient ventilation. 100 mm (3.94 inches) 100 mm (3.94 inches) 100 mm (3.94 inches) or 100 mm (3.94 inches) the 3 Press 29UM55 (Power) button on the bottom of the monitor to turn it on. CAUTION Unplug the power cord prior to moving or yy installing the monitor.
ASSEMBLING AND PREPARING Adjusting the angle WARNING ENGLISH ENG 1 Place the monitor in an upright position, mounted on the stand base. 2 Adjust the angle of the screen. The angle of the To avoid injury to the fingers when adjusting yy the screen, do not hold the lower part of the monitor's frame as illustrated below. screen can be adjusted forwards or backwards for a comfortable viewing experience.
ASSEMBLING AND PREPARING 13 Installing the wall mount plate The Kensington security system connector is located at the back of the Monitor set. For more information on installation and usage, refer to the Kensington lock user manual or visit the website at http://www.kensington.com. This monitor supports the specification of the standard wall mount plate or compatible device. Connect the Kensington security system cable between the Monitor set and a table. 1 Place the screen face down.
ASSEMBLING AND PREPARING Installing to a wall CAUTION ENGLISH ENG Install the monitor at least 100 mm (3.94 inches) away from the wall and leave about 100 mm (3.94 inches) of space at each side of the monitor to ensure sufficient ventilation. Detailed installation instructions can be obtained from your local retail store. Please refer to the manual to install and set up a tilting wall mounting bracket. 100 mm (3.94 inches) 100 mm (3.94 inches) 100 mm (3.94 inches) 100 mm (3.
USING THE MONITOR 15 USING THE MONITOR This monitor supports the *Plug and Play yy feature. *Plug and Play: A feature that allows you to add a device to your computer without having to reconfigure anything or install any manual drivers. HDMI connection Transmits the digital video and audio signals from your PC and A/V devices to the monitor. Connect your PC and AV device to the monitor with the HDMI cable as illustrated below. Press the menu button and then select the input option from the input menu.
USING THE MONITOR Connecting to AV Devices ENGLISH ENG HDMI connection Transmits the digital video and audio signals from your PC and A/V devices to the monitor. Connect your PC and AV device to the monitor with the HDMI cable as illustrated below. Press the menu button and then select the input option from the input menu. Connecting to External Devices Connecting Headphones Connect peripherals to the monitor via the headphones port. Connect as illustrated.
CUSTOMIZING SETTINGS 17 CUSTOMIZING SETTINGS 1 Press the joystick button on the bottom of the monitor. 2 Move the joystick up/down (▲/▼) and left/right(◄/►) to set the options. 3 Press the joystick button once more to exit the main menu. Power Indicator Joystick Button Button Menu Status Description Main menu disabled Enables the main menu. Main menu enabled Exits the main menu.
CUSTOMIZING SETTINGS Customizing settings ENGLISH ENG Menu Settings -Quick Settings 1 To view the OSD menu, press the joystick button at the bottom of the monitor and then enter the Menu. Go to Quick Settings > Brightness by moving the joystick. 2 3 Configure the options following the instructions that appear in the 4 5 bottom right corner. To return to the upper menu or set other menu items, move the joystick to ◄ or pressing ( / OK) it.
CUSTOMIZING SETTINGS 19 -Picture the bottom of the monitor and then enter the Menu. Go to Picture by moving the joystick. 2 3 Configure the options following the instructions that 4 5 Game Adjust appear in the bottom right corner. To return to the upper menu or set other menu items, move the joystick to ◄ or pressing ( / OK) it. If you want to exit the OSD menu, move the joystick to ◄ until you exit. Color Adjust Each option is described below.
CUSTOMIZING SETTINGS Game Adjust Black Stabilizer : You can control the black contrast to have better visibility in dark scenes. Increasing the Black Stabilizer value brightens the low gray level area on the screen. (You can easily distinguish objects on dark game screens.) Reducing the Black Stabilizer value darkens the low gray level area and increases the dynamic contrast on the screen. Response Time Sets a response time for displayed pictures based on the speed of the screen.
CUSTOMIZING SETTINGS 21 -General ton at the bottom of the monitor and then enter the Menu. Go to General by moving the joystick. SMART ENERGY SAVING 2 Game Adjust 3 Configure the options following the instructions that 4 5 Low Power LED Automatic Standby Color Adjust appear in the bottom right corner. To return to the upper menu or set other menu items, move the joystick to ◄ or pressing ( / OK) it. If you want to exit the OSD menu, move the joystick to ◄ until you exit.
CUSTOMIZING SETTINGS -Reset ENGLISH ENG 1 To view the OSD menu, press the joystick but- ton at the bottom of the monitor and then enter the Menu. Go to Reset by moving the joystick. 2 3 Configure the options following the instructions that 4 5 appear in the bottom right corner. To return to the upper menu or set other menu items, move the joystick to ◄ or pressing ( / OK) it. If you want to exit the OSD menu, move the joystick to ◄ until you exit. Each option is described below.
CUSTOMIZING SETTINGS 23 -Picture mode bottom. Each option is described below. Menu > Picture Picture Mode Description Custom Allows the user to adjust each element. The color mode of the main menu can be adjusted. Reader It is a mode that the screen is adjusted to the best for the newspaper. If you want screen more bright, you can control brightness in Menu OSD. Photo Optimizes the screen to view photos. Cinema Optimizes the screen to improve the visual effects of a video.
TROUBLESHOOTING ENGLISH ENG TROUBLESHOOTING Nothing is displayed on the screen. Is the monitor's power cord plugged yyCheck if the power cord is correctly plugged in to the power outlet. in? Is the power indicator on? yyCheck the power cable connection and press the power button. Is the power indicator displaying ? yyCheck that the connected input is enabled (Menu - Input).
TROUBLESHOOTING 25 NOTE The display color is abnormal. Does the display appear discolored (16 color)? Does the display color appear unstable or in monochrome? Are there spots on the screen? yySet the color to 24 bit (true color) or higher. In Windows, go to Control Panel > Display > Settings > Color Quality. yyCheck if the signal cable is connected properly. Reconnect the cable or reinsert the PC's video card.
SPECIFICATIONS ENGLISH ENG SPECIFICATIONS 25UM58 LCD Screen Type TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Panel,Anti-Glare coating Resolution Pixel Pitch Maximum Resolution 0.2286 mm x 0.2286 mm 2560 x 1080 @ 60 Hz Recommended Resolution Horizontal Frequency Vertical Frequency Synchronization HDMI IN1, HDMI IN2 , H/P Voltage 2560 x 1080 @ 60 Hz 30 kHz to 90 kHz 56~75 Hz (PC) Separate Sync. Video Signal Input Connector Power AC/DC adaptor 19 V 1.6 A or 19 V 1.
SPECIFICATIONS Environmental Conditions Stand Angle Adjustment Dimension Weight (Without Packaging) Type ADS-40SG-19-3 19025G, SHENZHEN HONOR ELECTRONIC production Or type ADS-40FSG-19 19025GPG-1, SHENZHEN HONOR ELECTRONIC production Or type ADS-40FSG-19 19025GPBR-1, SHENZHEN HONOR ELECTRONIC production Or type ADS-40FSG-19 19025GPI-1, SHENZHEN HONOR ELECTRONIC production Or type ADS-40FSG-19 19025GPCU-1, SHENZHEN HONOR ELECTRONIC production Or type ADS-40FSG-19 19025GPB-2, SHENZHEN HONOR ELECTRONIC prod
SPECIFICATIONS ENGLISH ENG SPECIFICATIONS 29UM58 LCD Screen Type Resolution Pixel Pitch Maximum Resolution Video Signal Input Connector Power AC/DC adaptor Environmental Conditions Stand Angle Adjustment Dimension Weight (Without Packaging) Recommended Resolution Horizontal Frequency Vertical Frequency Synchronization HDMI IN1, HDMI IN2 , H/P Voltage TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Panel,Anti-Glare coating 0.2628 mm x 0.
SPECIFICATIONS 34UM58 LCD Screen Type Resolution Pixel Pitch Maximum Resolution Video Signal Input Connector Power AC/DC adaptor Environmental Conditions Stand Angle Adjustment Dimension Weight (Without Packaging) Recommended Resolution Horizontal Frequency Vertical Frequency Synchronization HDMI IN1, HDMI IN2 , H/P Voltage TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Panel,Anti-Glare coating 0.312(H) mm x 0.
SPECIFICATIONS Factory support mode ENGLISH ENG Preset Mode Horizontal Frequency Vertical Frequency Polarity (H/V) (kHz) (Hz) 720 x 400 31.468 70.08 -/+ 640 x 480 31.469 59.94 -/- 640 x 480 37.5 75 -/- 800 x 600 37.879 60.317 +/+ 800 x 600 46.875 75 +/+ 1024 x 768 48.363 60 -/- 1024 x 768 60.123 75.029 +/+ 1152 x 864 67.5 75 +/+ 1280 x 720 45 60 +/+ 1280 x 1024 63.981 60.02 +/+ 1280 x 1024 79.976 75.025 +/+ 1600 x 900 60 60 +/+ 1680 x 1050 65.290 59.
PROPER POSTURE 31 Proper Posture for Using the Monitor Adjust the screen so that you can comfortably view at a slight downward angle from your natural eye level. Take a break for approximately ten minutes every hour to reduce any fatigue caused by long-time yy usage. The stand of the touch monitor allows the product to be used in the optimum position. yy Adjust the stand angle to obtain the best view of the screen. You should be looking slightly down at the screen.
Supplier’s Declaration of Conformity Trade Name LG Responsible Party LG Electronics USA, Inc. Address 111 Sylvan Avenue, North Building, Englewood Cliffs,NJ 07632 E-mail lg.environmental@lge.com *above information is only for USA FCC Regulatory Make sure to read the Safety Precautions before using the product. The model and serial number of the product are located on the back and on one side of the product. Record them below in case you ever need service.
