Confidential LG Innotek ESL Tag Controller User manual Copyrightⓒ. 2015. All Rights Reserved.
Confidential 1. Overview LG Innotek Tag controller device provides customer with several functions as below Waking Tag up from sleep mode Updating new purchase image on Tag Deleting purchase image on Tag Returning a Tag to be factory settings Display Area Tag Controller description Tag Controller Symbol Mode Fucntion Registration Match the Tag to Merchandise’s Info. Delete Delete the Tag from matched Info. Next Change the stored Image Function User Defined (ex.
2. Updating new purchase image on Tag Confidential LG Innotek ☜ To change purchase information on Tag, perform the following steps : 1. Put Tag controller near center of Tag’s display 2. Press and hold ‘Registration’ button on Tag controller until red LED off (about 0.5 seconds) 3. When Tag is successfully received ‘Registration’ data from Tag controller, Tag’s display will be changed to “Connected” for a few minutes.
3. Deleting purchase information on Tag Confidential LG Innotek ☜ To release(delete) purchase information on Tag, perform the following steps : 1. Put Tag controller near center of Tag display 2. Press and hold ‘Release’ button until red LED off (about 0.5 seconds) 3. If Tag was received ‘Reset’ command from Tag controller, Tag will delete purchase information and Tag’s display will be changed to “Ready” 4. After step.
Confidential 4. Change Next Image LG Innotek Sale ☜ To change the another saved image of Tag from former image, perform the following steps : 1. Put Tag controller near center of Tag display 2. Press and hold ‘Next’ button until red LED off (about 0.5 seconds) 3. If Tag was received ‘Next’ command from Tag controller, Tag’s display will be changed to new image Copyrightⓒ. 2015. All Rights Reserved.
5. Spare Button Confidential LG Innotek ☜ This button is spare function. Customer will assign this button for their needs. For example stock function, etc. Copyrightⓒ. 2015. All Rights Reserved.
Confidential LG Innotek FCC Information This device complies with part 15 of the FCC Results. Operation is subject to the following two conditions : (1) This Device may not cause harmful interface, and (2) This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for CLASS B digital device, pursuant to Part 15 of FCC Rules.