User's Manual

ManualsBrandsLG Innotek ManualsElectronicsBT(V4.2) + WLAN(802.11a/b/g/n/ac) 2x2 MIMO Module

0 / 6

Internal Use Only

Description

- Model : RBHP-B216C

- Bluetooth: v4.2+EDR

- WLAN : 802.11 a/b/g/n/ac

- Frequency Range : 2400MHz ~ 5835MHz

Features

- Dimension : 22.5mm x 20.0mm x 2.7mm

- Temperature Range : -40℃ ~ +85℃

- Supply Voltage : VBAT 3.0V to 3.6V

- Output Power

BT: Typ. +1.5dBm(Class 2)

WLAN : 16.0dBm(b), 13dBm(g), 12dBm(n), 13dBm(a), 10dBm(ac)

- Interface

PCIe(WLAN), UART(BT), I2S

Application

- Automotive

Dimensions

Summary of content (9 pages)

PAGE 1
Internal Use Only Description - Model : RBHP-B216C - Bluetooth: v4.2+EDR - WLAN : 802.11 a/b/g/n/ac - Frequency Range : 2400MHz ~ 5835MHz Features - Dimension : 22.5mm x 20.0mm x 2.7mm - Temperature Range : -40℃ ~ +85℃ - Supply Voltage : VBAT 3.0V to 3.6V - Output Power BT: Typ. +1.5dBm(Class 2) WLAN : 16.0dBm(b), 13dBm(g), 12dBm(n), 13dBm(a), 10dBm(ac) - Interface PCIe(WLAN), UART(BT), I2S Application - Automotive Dimensions pyrightⓒ. 2017. All Rights Reserved.
PAGE 2
Internal Use Only • Power Supply Specification One Buck regulator, multiple LDO regulators, and a power management unit(PMU) are integrated into the BCM88359. All regulators are programmable via the PMU. These blocks simplify power supply design for Bluetooth and WLAN functions in embedded designs. A single VBAT(3.0V to 3.6V DC max) and VIO supply (1.8V to 3.3V) can be used, with all additional voltages being provided by the regulators in the BCM88359.
PAGE 4
Internal Use Only General Features RBHP-B216C satisfies the following standards 1)Bluetooth Features  Bluetooth Power Class 2.  Provisioned for low energy angle-of –arrival applications.  Complies with Bluetooth Core Specification Version 4.2 with provisions for supporting future specifications.  Supports extended synchronous connections(eSCO), for enhanced voice quality by allowing for retransmission of dropped packets.  Adaptive frequency hopping(AFH) for reducing radio frequency interference.
PAGE 8
FCC Information This device complies with part 15 of the FCC Results. Operation is subject to the following two conditions : (1) This Device may not cause harmful interface, and (2) This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for CLASS B digital device, pursuant to Part 15 of FCC Rules.
PAGE 9
Information for OEM Integrator This device is intended only for OEM integrators under the following conditions: 1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and 2) The transmitter module may not be co-located with any other transmitter or antenna. End product labelling The label for end product must include “Contains FCC ID: YZP-RBHP-B216C, Contains IC: 7414C-RBHPB216C”. “ CAUTION: Exposure to Radio Frequency Radiation.