User's Manual

ManualsBrandsLG Innotek ManualsElectronicsWi-Fi + BT Combo module

TITLE : Specifications for approval (RBHA-T223A)

(CUSTOMER P/NO : )

REV 0.1 (4 / 39)

APPDCHKDDSGD

DOCUMENT NO.

RBHA-T223A

LG Innotek Co., Ltd

(30) - 4021

1. Application

This specification is applied to LG Innotek Bluetooth v4.1 and WLAN(IEEE 802.11.b/g/n)

Module RBHA-T223A which includes WL1833Q.

2. Quality

Quality should meet each condition which mentioned on this specification. However, the

items which are not mentioned on this specification follow the inspection agreements and

standards which are agree with both companies.

3. Appearance and Characteristics

1) Appearance

Appearance should not contaminated by harmful materials and should not have cracks

etc. Mechanical dimensions should meet the contents of clause 8.

2) Characteristics

Electrical characteristics should meet the contents of clause 10.

4. Application of Bluetooth v4.1 and WLAN(IEEE 802.11 b/g/n) module

1) Automotive

5. Maximum Rating

No Item Rating Unit

1 Operating Temperature Range -40 ~ +85 ℃

2 Storage Temperature Range -40 ~ +105 ℃

3 VBAT_3V3 Voltage Range 3.1~ 3.6 V

4 VIO_1V8 Voltage Range 1.62 ~ 1.95 V

Summary of content (13 pages)

PAGE 1
TITLE : Specifications for approval (RBHA-T223A) (CUSTOMER P/NO : REV 0.1 (4 / 39) ) 1. Application This specification is applied to LG Innotek Bluetooth v4.1 and WLAN(IEEE 802.11.b/g/n) Module RBHA-T223A which includes WL1833Q. 2. Quality Quality should meet each condition which mentioned on this specification. However, the items which are not mentioned on this specification follow the inspection agreements and standards which are agree with both companies. 3.
PAGE 2
TITLE : Specifications for approval (RBHA-T223A) (CUSTOMER P/NO : REV 0.1 (5 / 39) ) 6. Test Electrical characteristics are tested for every products. However, if there are any objection in judgments, it should be treated with agreements of companies. 7. Labeling Information VESPUCCI RBHA-T223A LG 5521 1A 001 FCC ID:YZP-RBHAT223A 0678 No. Index ① PRODUCT NAME ② MODEL PART NO.
PAGE 3
TITLE : Specifications for approval (RBHA-T223A) (CUSTOMER P/NO : REV 0.1 (6 / 39) ) 8. Mechanical Dimension W b1 a3 a4 a2 a5 b2 a1 b3 c3 L c2 c1 Unit : mm R E V Mark Dimension Mark Dimension Mark Dimension Mark Dimension Mark Dimension W 21.2±0.2 L 22±0.2 a1 1.2±0.1 a2 0.6±0.1 a3 1.2±0.1 a4 1.15±0.1 a5 0.15±0.1 b1 1.2±0.1 b2 2.75±0.1 b3 1.2±0.1 c1 4.85±0.1 c2 4.85±0.1 c3 0.3±0.1 T 2.9 Max C 0.08 Max DSGD LG Innotek Co.
PAGE 4
TITLE : Specifications for approval (RBHA-T223A) (CUSTOMER P/NO : REV 0.1 (7 / 39) ) 9. General Features 9.1 BT(v4.1) + WLAN(IEEE 802.11 b/g/n) Module 1) Module Features • Intended for Automotive infotainment applications (-40℃ to +85℃) • Operating Voltage is 3.3V Power Rail and 1.8V IO Level • WLAN, BT, BLE on a single chip provides a unique scalable platform catering to all connectivity needs in vehicle infotainment • Shared HCI transport for BT/BLE over UART and SDIO for WLAN. • Automotive Module. -.
PAGE 5
TITLE : Specifications for approval (RBHA-T223A) (CUSTOMER P/NO : REV 0.1 (8 / 39) ) 9. General Features 9.2 Bluetooth 1) Bluetooth Features • Bluetooth Power Class 2 • Support Bluetooth 4.1 BLE • Includes concurrent operation and built-in coexisting prioritization handling of BT,BLE, ANT audio processing and WLAN • Embedded Fully Bluetooth v4.
PAGE 6
TITLE : Specifications for approval (RBHA-T223A) (CUSTOMER P/NO : REV 0.1 (9 / 39) ) 9. General Features 9.3 WLAN 1) WLAN Features • Support for IEEE 802.11b/g/n • Support for IEEE 802.11n(20/40MHz) partial streams 2.
PAGE 7
TITLE : Specifications for approval (RBHA-T223A) (CUSTOMER P/NO : REV 0.1 (26 / 39) ) 11. Pin Configuration No R E V Pin Name Description 1 2 3 GND GPIO4 UART_DBG_WL 4 IRQ_WL 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 GND RTC_CLK N.C WL_RS232_TX GND GND GPIO9 GPIO10 GPIO11 GPIO12 GND N.C GND UART_DBG_BT 1V8_VIO N.C. HCI_TX_BT Ground GPIO4 WLAN logger SDIO available, interrupt out.
PAGE 8
TITLE : Specifications for approval (RBHA-T223A) (CUSTOMER P/NO : No R E V REV 0.1 (27 / 39) ) Pin Name Description 23 HCI_RTS_BT UART RTS to Host 24 HCI_CTS_BT UART CTS from Host 25 GND Ground 26 N.C. N.C. 27 GND Ground 28 GND Ground 29 N.C(2.4GHz_Atenna_Ready) N.C(2.
PAGE 9
ANTENNA Information Model : THCT-24W Type : Dipole ( λ/4 @ 2GHz band) Configuration : 2.44GHz for External Dipole Antenna 1. APPLICATION SCORPE THIS PRODUCT CAN BE USED IN RADIO TELECOMMUNICATION SYSTEM WITH 2.4~2.5Ghz LIKE WIFI SYSTEM. 2. OPERATING CONDITIONS NO. 2-1 ITEMS OPERATING ENVIRONMENT 3. ELECTRONIC SPECIFICATIONS NO SPECIFICATIONS TEMPERATURE : -20~70℃ HUMIDITY : ~85% RH ITEMS SPECIFICATIONS 3-1 IMPEDANCE 50Ω 3-2 FREQUENCY RANGE 2.4~2.5Ghz 3-3 PEAK GAIN (ON HORIZONTAL) 2.
PAGE 10
Setting Test Environments - Required Items 1) The Evaluation Board 2) Power supply (DC Adapter +5V ,1A) 3) USB Cable 4) Shield Box
PAGE 11
- Evaluation Board Setting Please connect +5V Power Cable at the Power Connector And USB Connector with Host PC Not USE BT+WI-FI ANT Reset Switch down Status LED USB Connector Power Connector
PAGE 12
CONFIDENTIAL IMPORTANT INFORMATION The information contained in this document is confidential and should not be disclosed to any third party without the prior written consent of LGIT. FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Part 15.
PAGE 13
CONFIDENTIAL OEM instructions I. “Module is limited to OEM installation ONLY “ II. “OEM integrators is responsible for ensuring that the end-user has no manual instructions to remove or install module” III. “FCC RF Exposure requirements: Module is limited to installation in mobile or fixed applications, according to Part 2.1091(b). Separate FCC approval is required for all other operating configurations, including portable configurations with respect to Part 2.1093 and different antenna configurations.