User's Manual

ManualsBrandsLG Innotek ManualsElectronicsBluetooth/WLAN Combo Module for Automotive

LG Innotek Co, Ltd

PART NO.

NAME MATERIAL SPEC FINISH SIZE

UNIT SCALE

DRAW DSGD CHKD APPD

TITLE

DOCUMENT NO.

NO. Changes

0.1 `15.08.21

Released

RBHA-C213x

User Manual(1/5)

Seo

Park

Kim

Description

- Model : RBHA-C213x

- Bluetooth: v4.0+EDR

- WLAN : 802.11 b/g/n

- Frequency Range : 2400MHz ~ 2483.5MHz

Features

- Dimension : 24.0mm x 18.5mm x 2.7mm

- Temperature Range : -40℃ ~ +85℃

- Supply Voltage : VREGIN – 3.1V to 3.6V

- Output Power

BT: Typ. +1.5dBm(Class 2)

WLAN : 12.5dBm(b), 10dBm(g), 10dBm(n),

- Interface

SDIO(WLAN), UART(BT),PCM/I2S

Application

- Automotive

Dimensions

• User Manual

Summary of content (8 pages)

PAGE 1
• User Manual Description - Model : RBHA-C213x - Bluetooth: v4.0+EDR - WLAN : 802.11 b/g/n - Frequency Range : 2400MHz ~ 2483.5MHz Features - Dimension : 24.0mm x 18.5mm x 2.7mm - Temperature Range : -40℃ ~ +85℃ - Supply Voltage : VREGIN – 3.1V to 3.6V - Output Power BT: Typ. +1.5dBm(Class 2) WLAN : 12.5dBm(b), 10dBm(g), 10dBm(n), - Interface SDIO(WLAN), UART(BT),PCM/I2S Application - Automotive Dimensions PART NO. NAME MATERIAL SPEC FINISH SIZE 0.1 `15.08.21 Released NO.
PAGE 2
* Power Supply Specification The power of DC3.1V ~ 3.6V is should be supplied to the Bluetooth module power(VDD). The module supplies the power to the each block depending on the function. Module input power in excess of the rated input power may cause damage to the internal components. And the influx of Surge and ESD also may lead to the damage of the modem in the vehicle. For the prevention of this, the module is necessary to design block the infloux of Sugre and EDS. Pin NO.
PAGE 3
*Boot sequence PART NO. NAME MATERIAL SPEC FINISH SIZE 0.1 `15.08.21 Released NO. Changes UNIT SCALE LG Innotek Co, Ltd DRAW DSGD CHKD J S Seo I P Park APPD K S Kim TITLE User Manual(3/5) DOCUMENT NO.
PAGE 4
General Features RBHA-C213x satisfies the following standards 1)Bluetooth Features • Bluetooth Power Class 2 • Embedded Fully Bluetooth v2.0/v2.1 + EDR System Compliant • Piconet and scatternet support • Support UART to 4Mbps • Integrated CSR AuriStream® low-power codec for wide-band voice quality • Bluetooth v3.0 specification compliant • Full qualified Bluetooth v4.
PAGE 5
PIN Description PART NO. NAME MATERIAL SPEC FINISH SIZE 0.1 `15.08.21 Released NO. Changes UNIT SCALE LG Innotek Co, Ltd DRAW DSGD CHKD J S Seo I P Park APPD K S Kim TITLE User Manual(5/5) DOCUMENT NO.
PAGE 6
PIN Description PART NO. NAME MATERIAL SPEC FINISH SIZE 0.1 `15.08.21 Released NO. Changes UNIT SCALE LG Innotek Co, Ltd DRAW DSGD CHKD J S Seo I P Park APPD K S Kim TITLE User Manual(6/5) DOCUMENT NO.
PAGE 7
FCC Information This device complies with part 15 of the FCC Results. Operation is subject to the following two conditions : (1) This device may not cause harmful interface, and (2) This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for CLASS B digital device, pursuant to Part 15 of FCC Rules.
PAGE 8
Information for OEM Integrator This device is intended only for OEM integrators under the following conditions: 1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and 2) The transmitter module may not be co-located with any other transmitter or antenna. End product labelling The label for end product must include “Contains FCC ID: YZP-RBHAC213B, IC ID: 7414A-RBHAC213B”. “CAUTION : Exposure to Radio Frequency Radiation.