User's Manual

ManualsBrandsLG Innotek ManualsElectronicsBluetooth Complete Module

LG Innotek Co, Ltd

PART NO.

NAME MATERIAL SPEC FINISH SIZE

UNIT SCALE

DRAW DSGD CHKD APPD

TITLE

DOCUMENT NO.

NO. Changes APPD

1. 0. `13.10.10

Initialize

RBFA-C217/8/9A(1-2)

User Manual(1/5)

Choi

Park

Kim

Description

This product is applied to Class 2 Bluetooth Multimedia Module

RBFA-C217/8/9A which includes the CSR BC5-MM chipset

and the integrated pattern antenna.

Features

- Sensitivity : Typ. -88dBm

- Output Power : Typ. +2dBm Class 2

- Temperature Range : -40℃ ~ +85℃

- Supply Voltage : VDD – 3.1V to 3.6V

- Interface : UART, USB

- Audio Interface : Analog In/Out, Digital In/Out(I2S)

- Bluetooth Specification v3.0 with EDR Compliant

Applications

- Handsfree

- Bluetooth automotive wireless gateways

Dimensions

• Product Information

Summary of content (7 pages)

PAGE 1
• Product Information Description This product is applied to Class 2 Bluetooth Multimedia Module RBFA-C217/8/9A which includes the CSR BC5-MM chipset and the integrated pattern antenna. Features - Sensitivity : Typ. -88dBm - Output Power : Typ. +2dBm Class 2 - Temperature Range : -40℃ ~ +85℃ - Supply Voltage : VDD – 3.1V to 3.6V - Interface : UART, USB - Audio Interface : Analog In/Out, Digital In/Out(I2S) - Bluetooth Specification v3.
PAGE 2
* Power Supply Specification The power of DC3.1V ~ 3.6V is should be supplied to the Bluetooth module power(VDD). The module supplies the power to the each block depending on the function. Module input power in excess of the rated input power may cause damage to the internal components. And the influx of Surge and ESD also may lead to the damage of the modem in the vehicle. For the prevention of this, the module is necessary to design block the infloux of Sugre and EDS. Pin NO.
PAGE 3
General Features 1) Bluetooth Module Features • Bluetooth Power Class 2 • Embedded Fully Bluetooth v2.0/v2.1 + EDR System Compliant • Embedded Bluetooth Profile • Embedded AEC/NR Algorithm for Handsfree • Full-speed Bluetooth Operation with Full Piconet Support • Operation Voltage is 3.3V Single Power Rail • Excellent Compatibility with Cellular Telephones • Command and data Interface is UART and USB • 16-bit Internal Stereo CODEC • Support for 802.
PAGE 4
PIN Descriptions No. Pin Name I/O Pad Type 1 UART_Tx UART data output Bidirectional CMOS output, tristate, O - Recommended external 4.7kΩ Pull-up resisto with weak internal pull-up r.
PAGE 5
PIN Descriptions No.
PAGE 6
RSS-GEN 7.1.3 User manual Notice for Licence-Exempt Radio Appartus. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
PAGE 7
RF Exposure Statement (2.1091) FCC RF Radiation Exposure Statement: FCC RF Radiation Exposure Statement: This equipment complies with FCC RF Radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.