OPERATION DESCRIPTION Model: RBFA-C21SA FCC ID: YZP-RBFAC21SA Company LG INNOTEK CO.,LTD Signature Date 2014.10.06 Name J.S.
• Product Information Description This product is applied to Class 2 Bluetooth Multimedia Module RBFA-C21SA which includes the CSR BC5-MM chipset and the integrated pattern antenna. Features - Sensitivity : Typ. -88dBm - Output Power : Typ. +2dBm Class 2 - Temperature Range : -40℃ ~ +85℃ - Supply Voltage : VDD – 3.1V to 3.6V - Interface : UART, USB - Bluetooth Specification v3.
* Power Supply Specification The power of DC3.1V ~ 3.6V is should be supplied to the Bluetooth module power(VDD). The module supplies the power to the each block depending on the function. Module input power in excess of the rated input power may cause damage to the internal components. And the influx of Surge and ESD also may lead to the damage of the modem in the vehicle. For the prevention of this, the module is necessary to design block the influx of Surge and ESD. Pin No.
General Features 1) Bluetooth Module Features • Bluetooth Power Class 2 • Embedded Fully Bluetooth v2.0/v2.1/v3.0 + EDR System Compliant • Embedded Bluetooth Profile • Embedded AEC/NR Algorithm for Handsfree • Full-speed Bluetooth Operation with Full Piconet Support • Operation Voltage is 3.3V Single Power Rail • Excellent Compatibility with Cellular Telephones • Command and data Interface is UART and USB • 16-bit Internal Stereo CODEC • Support for 802.
Packing Infomation
PIN Descriptions No.
No.
FCC Information This device complies with part 15 of the FCC Results. Operation is subject to the following two conditions : (1) This device may not cause harmful interface, and (2) This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for CLASS B digital device, pursuant to Part 15 of FCC Rules.
Information for OEM Integrator This device is intended only for OEM integrators under the following conditions: 1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and 2) The transmitter module may not be co-located with any other transmitter or antenna. End product labelling The label for end product must include “Contains FCC ID: YZP-RBFAC21SA”. “CAUTION : Exposure to Radio Frequency Radiation.
