Cycles Guide

ManualsBrandsLG Electronics ManualsAppliances2.4 cu. ft. 24 in. All-in-One Compact Front Load Washer & Dryer Combo in White

24 OPERATION

Wash Cycles

The wash cycles are designed for specific types of wash loads. Select the cycle that best matches the load

contents for maximum wash performance and fabric care. See Sorting Laundry section for best results,

and follow the fabric care labels on your garments. For a guide to fabric care symbols, see Sorting

Laundry section.

Cycle Guide

Turn the knob or press the button to select the desired cycle. When you select a wash cycle, the light for

the corresponding wash cycle will turn on.

NOTE

• Whenever load weights are mentioned, assume 1 lb (0.45 kg) = 1 thick bath towel (dry).

Cycle Normal

Description Use to wash all normal items such as cotton, linen, shirts, jeans or mixed loads, except

delicate fabrics such as wool or silk.

•Pressing the Start/Pause button without selecting a cycle will cause the Normal

cycle to begin immediately, using the default settings.

Wash Temp. Default: Warm Available: All

Spin Speed Default: High Available: All

Cycle Heavy Duty

Description Suitable for washing heavily soiled laundry, such as cotton fabrics, using more powerful

wash motions.

• When washing large loads, there will be brief periods of 2 minutes or more

without agitation. These soak periods are part of the cycle’s design, and are

normal.

Wash Temp. Default: Warm Available: Ex Hot, Hot, Warm

Spin Speed Default: High Available: All

Cycle Bulky/Large

Description Suitable for washing blankets or bulky items which have difficulty absorbing water, such

as pillows, blankets, comforters, sheets or pet bedding.

• Do not use this cycle to wash a mixed load of bedding and non-bedding items.

• Do not mix large/bulky items with smaller articles of clothing.

• Do not wash excessively large items. If large/bulky items do not fit easily into the

drum, there may not be enough room for them to move during washing.

Wash Temp. Default: Tap Cold Available: Hot, Warm, Cold, Tap Cold

Spin Speed Default: High Available: High, Med, Low, No Spin

Cycle Sanitary

Description This cycle reduces bacteria on laundry when used in conjunction with bleach, without high

energy consumption.

Wash Temp. Default: Ex Hot Available: Ex Hot

Summary of content (8 pages)

PAGE 1
24 OPERATION Wash Cycles The wash cycles are designed for specific types of wash loads. Select the cycle that best matches the load contents for maximum wash performance and fabric care. See Sorting Laundry section for best results, and follow the fabric care labels on your garments. For a guide to fabric care symbols, see Sorting Laundry section. Cycle Guide Turn the knob or press the button to select the desired cycle.
PAGE 2
OPERATION 25 Cycle Spin Speed Sanitary Default: High This cycle is a powerful, high-temperature cycle designed specifically to reduce certain allergens. NOTE • Selecting this cycle automatically incorporates steam into the wash cycle. • This cycle can significantly reduce allergens in bedding and clothing. • This cycle helps reduce dust mite populations and helps reduce allergens.
PAGE 3
26 OPERATION Cycle Spin Speed Wash+Dry Default: Ex High Cycle Description Available: Ex High, High Speed Wash Quickly washes lightly soiled clothing and small loads. For high wash and rinse efficiency, wash small loads of 2-3 lightly soiled garments. • Use very little detergent in this cycle. To add an extra rinse, use the Extra Rinse option. Wash Temp.
PAGE 4
OPERATION 27 Available Options † This option is automatically included in the cycle and cannot be deselected. ENGLISH NOTE • You cannot select any option in the Steam Refresh cycle. • For the Drain + Spin cycle, only the Delay Wash option can be selected. • The Delay Wash, Extra Rinse and Heavy Soil options are available for every cycle in this table.
PAGE 5
28 OPERATION Cycle Modifiers About Modifier Buttons Each cycle has default settings that are selected automatically. You can also customize these settings using the cycle modifier buttons. • Repeatedly press the button for the desired modifier until the indicator light for the desired setting is lit. • The washer automatically adjusts the water level for the type and size of wash load for best results and maximum efficiency.
PAGE 6
OPERATION 29 Rubber and Plastics Time 30/60/120 minutes Do not dry any items made from or containing rubber or plastics, such as: • Fabric Type: Cotton, towels • Curtains and tablecloths • Bath mats Fiberglass Do not dry fiberglass articles in the appliance. Glass particles left in the appliance may be picked up by your clothes and cause skin irritation. NOTE • It is normal for the dryer fan motor to run for about 60 seconds after the dry cycle is stopped.
PAGE 7
30 OPERATION 2 Press the Power button. • Do not select the wash cycle. 3 Press the Dry button repeatedly to toggle through the selections: • Normal (@) - For general drying • Damp Dry (-) - For damp drying items for ironing • Low Temperature (*) - For delicate fabrics • Energy Saver (() - For heavier fabrics • Time 30/60/120 minutes - For timed drying 4 Press the Start/Pause button. NOTE • If you turn the cycle selector knob, you will be unable to select a dry only cycle.
PAGE 8
OPERATION 31 Using the Pre-wash Option • Press and hold the TurboWashTM and Dry buttons at the same time for 3 seconds. - The indicator (I) lights up. Remote Start Use a smartphone to control your washer remotely. • For more information, see SMART FUNCTIONS in this manual. Delay Wash Once you have selected the cycle and other settings, press the Delay Wash button to delay the start of the wash cycle. • Each press of this button increases the delay time by 1 hour, for up to 19 hours.