FEATURES Corner Master The Robot Cleaner's ability to navigate around walls is part of what makes its cleaning performance so efficient. Learning Mode The Robot Cleaner memorizes the cleaning environment for smarter cleaning via its Smart Operation feature. Turbo Mode In the Turbo mode, the Robot Cleaner operates the suction motor and the brushes at a greater speed giving cleaner results. When selected, the Turbo mode activates automatically, cleaning carpets more efficiently.
SAFETY PRECAUTIONS This guide contains many important safety messages. Always read and obey all safety messages. Read all instructions before using. SAVE THESE INSTRUCTIONS Basic Safety Precautions After reading this manual, please keep it in an easily accessible location. This is the safety alert symbol. This symbol alerts you to potential hazards that can result in property damage and/or serious bodily harm or death.
SAFETY PRECAUTIONS WARNING 1) Place the cords from other appliances out of the area to be cleaned. 2) Do not operate the vacuum in a room where an infant or child is sleeping. 3) Do not operate the vacuum in an area where there are lit candles or fragile objects on the floor to be cleaned. 4) Do not operate the vacuum in a room that has lit candles on furniture that the vacuum may accidentally hit or bump into. 5) Do not allow children to sit on the vacuum. 6) Do not use the vacuum on a wet surface.
SAFETY PRECAUTIONS WARNING • Do not allow children or pets to play with or rest upon the Robot Cleaner at any time. Do not use the Robot Cleaner while an object is hanging from it. • Do not operate the Robot Cleaner in a room where a child is sleeping. Doing so can cause injury or product damage. Doing so can cause injury or product damage. • Keep gasoline, thinners, or other flammable materials, detergents, shampoos, or other foaming agents, or drinking water away from the Robot Cleaner.
SAFETY PRECAUTIONS CAUTION • Frequently empty the dust bin and keep it clean. The dust collected in the dust bin can trigger allergies and may contain harmful insects. it should be cleaned after each use. • Remove any cables or string from the floor before use. Cable or string can get tangled in the wheels of the Robot Cleaner and cause product failure or cause another appliance to be disconnected. • Only use the Robot Cleaner indoors.
SAFETY PRECAUTIONS CAUTION • Disconnect the battery pack from the appliance before making any adjustments, changing accessories, or storing the appliance. Such preventive safety measures reduce the risk of starting the appliance accidentally. • When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another.
INCLUDED WITH PRODUCT Robot Cleaner Remote controller Home station s Appearance and accessories may vary depending on model. OWNER’S MANUAL HOM-BOT Quick Guide HOM-BOT Before using, please carefully read the Safety Precautions pages to allow for safe operation of the product. After reading this manual, please keep it in an easily accessible location. This guide briefly describes how to use the robot cleaner. For more detail, please refer to the user manual.
PARTS - ROBOT CLEANER Top view Upper camera sensor Dust bin cover Display and function buttons Dust bin compartment release button Front view Ultrasonic sensors Obstacle detecting sensor window, home station detecting sensors, remote controller receiving sensors. Rear view Main Power switch Ventilation port Bottom view Cliff detection sensors Side brush Charging terminals Brush Wheel Battery housing Lower camera sensor s Appearance may vary depending on model.
PARTS – HOME STATION / DUST BIN Home station Remote holder Charging terminal Adapter jack Power cord keeper Dust bin Dust bin handle Cleaning brush Dust bin cover Suction port flap Sponge filter Dust bin lid opening button Particulate filter Filter cover s Appearance may vary depending on model.
BUTTON FUNCTIONS – ROBOT CLEANER TURBO START/STOP • After the power switch is in the ON position, press the Start/Stop button to start cleaning. • Press to stop cleaning. • Press and hold for two seconds to return to standby mode. • If button is pressed during Smart Diagnosis, the diagnosis will end. MODE • Press to change the mode. The mode icon will illuminate on the display when selected. • The Spot Clean mode is not available if the Robot Cleaner is at the home station.
BUTTON FUNCTIONS – REMOTE Power Turn power on, return power to standby Mode Change cleaning mode Directional button Enable manual operation or selection of an area in My Space cleaning mode Repeat Activate or deactivate Repeat Cleaning mode Schedule Schedule a cleaning time, or cancel a scheduled cleaning time Clock Set the clock on the Robot Cleaner Tip Home Send the Robot Cleaner to the Home Station Turbo Activate or deactivate Turbo mode Start/Stop button Start/Stop cleaning, or confirm a cleaning sc
DISPLAY STATUS Mute Lock. Battery level Schedule Shows once or daily icon AM/PM Turbo Repeat cleaning Homing Zigzag cleaning My Space cleaning Spot cleaning Cell by Cell cleaning Time display Tip 14 • The Robot Cleaner defaults to the last cleaning mode selected.
BEFORE STARTING Before Cleaning • Do not use this device in a room where a child is left alone. The child could be injured. • Remove fragile or unnecessary objects from the room to be cleaned, especially expensive ceramics and valuables which could fall or break. • Close the cover of the dust bin compartment before cleaning. • Remove any moisture that might be on the floor. • Remove cables, strips, towels, mats etc. from the floor so they will not get tangled in the brushes.
OVERVIEW 1 Install the home station. (p17) Insert the power cord plug into an outlet and locate the station against a wall. If power is not supplied to the home station, the Robot Cleaner will not charge. 2 Turn on the power supply of the Robot Cleaner. (p18) 3 Check the dust bin. 4 Select the desired cleaning mode and options. (p23-29) 5 Start cleaning. (p19) 6 Automatic charge. (p20-22) 5 ft.(1.5 m) 5 ft.(1.5 m) 61/2 ft.
INSTALLING THE HOME STATION 1. P osition the home station against a wall on hard, level flooring to prevent sliding during docking. It is not recommended to install the home station on carpet. Doing so may cause the Robot Cleaner to have difficulty docking. Remove objects within 5 ft. (1.5 m) to the right and left side and within 61/2 ft. (2 m) to the front. 5 ft. (1.5 m) 5 ft. (1.5 m) 61/2 ft. (2 m) 2. Plug the jack into the home station. 3. Plug the power cord into an outlet.
TURNING THE Robot Cleaner ON/OFF Turning On the Main Power Supply Flip the power switch to the ON position. ※D o not press the Start/Stop button at the same time as flipping the power switch. Doing so may delay the operation. ※ Turn off the power switch when the Robot Cleaner is not used for long periods. The switch must be turned back on for the Robot Cleaner to charge.
HOW TO START AND STOP CLEANING Using the Robot Cleaner's Buttons Once the Robot Cleaner is turned on, press the START/STOP button on the top of the Robot Cleaner to begin cleaning. A melody sounds and cleaning begins. Press the START/STOP button any time during the cleaning cycle to stop cleaning. ※ To start cleaning when the Robot Cleaner is in standby mode, press START/STOP once to turn on the power, then press again to start cleaning.
CHARGING THE BATTERY Automatic charging The Robot Cleaner returns to the home station at the end of a cleaning cycle or when its battery is running low. ※ If 10 minutes elapse without the Robot Cleaner moving or the battery is too low, the Robot Cleaner automatically goes into standby mode. ※ The power switch has to be in the ON position in order for the Robot Cleaner to charge at the home station. If the switch is OFF, an error message sounds.
CHARGING THE BATTERY Battery Level Indicator The battery level indicator is located on the status display. • The battery level indicator flashes if recharging is in progress, showing the charge level. • If recharging is complete, only the battery and clean mode icons are displayed to save energy. • The first level of the battery level icon flashes when the Robot Cleaner needs to be charged.
CHARGING THE BATTERY Energy Saving Charging Mode You can recharge the battery with the Energy Saving mode, if you don't use the Robot Cleaner for a long period of time or overnight. Step 1. P ress the On/Off button on the remote. All functions of the Robot Cleaner are turned off except the recharging mode. ※ After recharging is complete, press the On/Off button on the remote to use the Robot Cleaner.
CHOOSING A CLEANING MODE Zigzag Cleaning In Zigzag mode, the Robot Cleaner zigzags through each spot of the cleaning area. Select the Zigzag mode to quickly clean an area. Selecting the Zigzag Mode Press the Mode button continuously, on either the Robot Cleaner or remote, until the Zigzag icon illuminates. ※ The default mode on the Robot Cleaner is the Zigzag mode. Cell by Cell Cleaning Select the Cell by Cell mode for meticulous cleaning.
CHOOSING A CLEANING MODE My Space Cleaning Select the My Space mode to manually set the cleaning space. Selecting the My Space Mode 1. Press the My Space button. 2. Using the arrow buttons on the remote, guide the Robot Cleaner around the perimeter of the desired cleaning space. ※ Cleaning space must be smaller than 31/4 ft. (3 m). My Space 3. Once the area is specified, press the Start button. NOTE: If the cleaning area is not correctly outlined, an error message sounds.
AUXILIARY CLEANING MODES Manual Cleaning Manual mode moves the Robot Cleaner manually to the front, back and either side using the arrow buttons on the remote. While in Manual mode, the Robot Cleaner runs into obstacles placed behind it if the back arrow key on the remote is held down. Spot Cleaning The Spot mode cleans the area where it is placed within a 41/2 ft (1.37 m) diameter. Starting Spot Mode 1. Place the Robot Cleaner in the desired cleaning area. 2.
AUXILIARY CLEANING MODES Turbo Mode Select Turbo Mode for a more intense, powerful clean. Turbo Mode reduces the battery duration. Selecting Turbo Mode Press the Turbo button on the remote or on the Robot Cleaner to activate the Turbo mode. Press the Turbo button at any time during the cleaning operation to cancel the Turbo mode. ※ Turbo Mode (Floor Master Function) Turbo mode activates automatically on carpets.
SETTING THE CLOCK You can set or change the current time on the Robot Cleaner. Pressing the Clock button on the remote when the Robot Cleaner is in standby mode starts the clock setting mode. Flickering Flickering s Select by using s buttons on the remote. The function can be heard through the voice guide. Flickering Set the hour by using uv buttons on the remote. Set the minutes using uv buttons on the remote. Set AM/PM using uv buttons on the remote.
SCHEDULING CLEANING Cleaning can be scheduled so that the Robot Cleaner starts cleaning at a scheduled time. Press the Schedule button on the remote while the Robot Cleaner is recharging to set a scheduled cleaning. Setting/Cancelling a scheduled cleaning is only possible when the unit is recharging on the home station Flickering Select Schedule Once or Schedule Daily option using the uv buttons on the remote. A voice message confirms the schedule. Set the hour using the uv buttons on the remote.
MOP CLEANING (on some models) Remove dust on hard floors by attaching the ultra microfiber mop to the Robot Cleaner. When the mop plate is attached, the Robot Cleaner will not climb on to carpets or over thresholds, in order to prevent transferring dirt from the mop. Caution Do not cover the bottom camera sensor with the mop. For mop cleaning, mount the mop and mop plate to the Robot Cleaner according to the following instructions: 1.
LOCATION SEARCH FUNCTION The Robot Cleaner remembers its location while cleaning. If the user moves the Robot Cleaner while it is operating, it will search for the location it was moved from by using its navigational location search function before continuing to clean. ※ The navigational function is activated after the Robot Cleaner adequately recognizes the cleaning environment. Change location Manual Relocation. 1. With the power off, locate the Robot Cleaner near where it was originally moved from.
SMART DIAGNOSIS™ Robot Cleaner uses the Smart Diagnosis feature to run a self-diagnosis. If any irregularity is found from the diagnosis, contact the local LG Electronics service center. ※ During Smart Diagnosis, the Robot Cleaner moves about within a 11/5 ft. (50 cm) radius. So, make sure no objects are in the way within a 31/4 ft. (1 m) radius around the home station, before starting Smart Diagnosis. 1.