ENGLISH FRANÇAIS ESPAÑOL OWNER’S MANUAL STYLER Read this owner’s manual thoroughly before operating the appliance and keep it handy for reference at all times. S3RERB MFL66101219 www.lg.
TABLE OF CONTENTS TABLE OF CONTENTS 3 IMPORTANT SAFETY INSTRUCTIONS 3 Safety Instructions for Installation 4 Safety Instructions for Connecting Electricity 5 Basic Safety Precautions 6 Grounding Instructions 7 8 PRODUCT FEATURES 25 Checking the Water Tanks 25 Loading the Styler Hangers Using the Moving Hanger Pants Hanger or Pants Crease Care Shelf 29 Control Panel 31 Control Panel Features Cycle Guide PRODUCT OVERVIEW 8 Parts 32 Choosing a Cycle 9
IMPORTANT SAFETY INSTRUCTIONS 3 READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE. There are many important safety messages in this manual and on your appliance. Always read and obey all safety messages. This is the safety alert symbol. This symbol alerts you to potential hazards that can result in product damage, property damage, or serious bodily harm or death. The safety alert symbol will be followed by either the hazard signal word WARNING or CAUTION.
IMPORTANT SAFETY INSTRUCTIONS WARNING For your safety, the information in this manual must be followed to minimize the risk of fire, explosion, or electric shock, or to prevent property damage, injury to persons, or death. SAFETY INSTRUCTIONS FOR INSTALLATION • To reduce the risk of electric shock, do not install the appliance in humid spaces such as a bathroom. Failure to follow this warning can cause death, serious injury, fire, electric shock, or product deformation or malfunction.
IMPORTANT SAFETY INSTRUCTIONS 5 READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE. WARNING To reduce the risk of fire or explosion, electric shock, property damage, injury to persons or death when using this appliance, follow basic safety precautions, including the following: USE • • Do not allow children to play on or in the appliance. Close supervision of children is necessary when the appliance is used near children.
IMPORTANT SAFETY INSTRUCTIONS WARNING To reduce the risk of fire or explosion, electric shock, property damage, injury to persons or death when using this appliance, follow basic safety precautions, including the following: • Do not open door during operation. The performance of the product may be adversely affected. If the product is installed on or near carpet, condensation from escaping hot air or steam may stain or damage the carpet. • Do not use the product for other than the intended purposes.
PRODUCT FEATURES 7 REMOVE ODORS Use the Styler's Refresh cycle to quickly and easily remove odors from clothes. *Control Lock REFRESH CLOTHING OR ADD AN AROMA Infuse items with the aroma from your favorite dryer fabric softener sheets to keep clothes and accessories looking, feeling, and smelling refreshed. REMOVE WRINKLES The Refresh cycle also uses steam and a moving hanger that vibrates approximately 180 times per minute to remove the wrinkles in clothing.
PRODUCT OVERVIEW PRODUCT OVERVIEW PARTS interior light hooks for Pants Crease Care moving hanger interior light Pants Crease Care shelf holder door* shelf aroma filter steam nozzle hot air circulation vent water drain tank water supply tank drip tray * The door swing can be reversed by the installer to fit the installation location.
PRODUCT OVERVIEW ENGLISH ACCESSORIES Included Accessories shelf drip tray MCK67970601 AHT74073801 2 rear leveling feet 2 hangers* AEE73149701 AEE73189601 pants hanger* AEE73189701 4 carpet install spikes 2 non-skid pads MHK61866301 anti-tip kit 9 2 rear cap covers MBL65818001 wrench 2 hinge covers 3550JA3143A *An ordinary metal/plastic hanger can be used if the hook is less than 5/32 in. (4 mm) thick. The hook must fit in the indentation in the moving hanger snugly.
PRODUCT OVERVIEW THE MOVING HANGER THE PANTS CREASE CARE • Use the moving hanger for suits, coats, jackets, blouses, dresses, skirts, and pants that don’t require a crease. Use the Pants Crease Care to crease pants. • Open the door to the Pants Crease Care by pressing the icon on the front. • Anything that can be securely placed on a hanger and steamed or dried without retaining hanger marks or other damage can be placed on the moving hanger.
PRODUCT OVERVIEW 11 THE SHELF • Use the shelf for stuffed toys, pillows, hats, and other accessories. • Use the shelf for sweaters, knits, lingerie, or delicate blouses that can show hanger marks, stretching, or other damage if dried on a hanger. • For best drying performance, do not stack items on the shelf. Dry single items or place items side by side with space between. • When not in use, store the shelf on the shelf holder knobs in the back of the cabinet.
INSTALLATION INSTALLATION INSTALLATION OVERVIEW Please read the following installation instructions first after purchasing this product or transporting it to another location. 7 3/4 in. / 2 in . 2 in. Check and choose the proper location Level the Styler Reverse the door swing (if needed) 100–130V only Connect to grounded outlet PRODUCT SPECIFICATIONS The appearance and specifications listed in this manual may vary due to constant product improvements.
INSTALLATION 13 UNPACKING THE STYLER Remove tape and any temporary labels from the Styler before using. Do not remove any warning labels, the model and serial number label, or the Tech Sheet that is located under the front of the Styler. • To remove any remaining tape or glue, rub the area briskly with your thumb. Tape or glue residue can also be easily removed by rubbing a small amount of liquid dish soap over the adhesive with your fingers. Wipe with warm water and dry.
INSTALLATION INSTALLATION LOCATION REQUIREMENTS WARNING Read all installation instructions completely before installing and operating the Styler. It is important to review this entire manual before installing and using the Styler. The installation requires: yy A grounded electrical outlet located within 2 ft. (61 cm) of either side of the appliance. yy A sturdy floor to support the total appliance weight of 183 lbs (83 kg). The combined weight of any other laundry appliances should also be considered.
INSTALLATION 15 Recommended Installation Spacing yy Additional space should be considered for ease of installation and servicing. yy Additional space might be required for wall, door and floor moldings. yy Additional space should be considered on all sides of the Styler to reduce noise transfer. yy Additional laundry appliance spacing should also be considered. 7 3/4 in. (20 cm) 2 in. (5 cm) 2 in. (5 cm) 18 in. (46 cm) in front ENGLISH The following clearances are recommended for the Styler.
INSTALLATION LEVELING THE STYLER WARNING WARNING yyThe Styler is heavy. Use two or more people if installing the rear leveling feet. Failure to do so can result in back injury or other injury. yyKeep the Styler upright when moving and installing it. If you lay the Styler on its side, refrigerant may leak and cause the appliance to malfunction. yy To reduce the risk of injury to persons, adhere to all industry recommended safety procedures including the use of long-sleeved gloves and safety glasses.
INSTALLATION 17 REVERSING THE DOOR 5 WARNING If the carpet has very deep pile or padding, the front feet may need to be extended slightly to install the drip tray. WARNING Do not attempt to reverse the door swing yourself. If the direction of the door swing needs to be changed after installation, contact the LG Customer Information Center at 1-800-243-0000 (USA) or 1-888-542-2623 (Canada). yyTake care when handling the carpet spikes.
INSTALLATION 3 Place the adhesive side of the non-skid pad on the floor. ASSEMBLING THE DRIP TRAY Before using the Styler, insert the drip tray onto the bottom of the cabinet. This side up Adhesive side Remove backing 4 Recheck the Styler's levelness. Push or rock the edges of the appliance gently to make sure that the Styler does not rock. If the Styler rocks, level the appliance again. 1 Hold the tray so the arrow and letter on the front of the tray face up.
OPERATION 19 BEFORE USE Clean the Styler. Clean the Styler thoroughly and wipe off all dust that accumulated during shipping. See Maintenance, page 37. Do not plug in or operate the appliance until the interior and exterior have thoroughly dried. CAUTION yy Do not scratch the Styler with a sharp object or use a detergent that contains alcohol, bleach, a flammable liquid or an abrasive when removing any tape or adhesive from the Styler,.
OPERATION USING THE STYLER 1 PREPARE ITEMS • Wash clothes first, if needed. • No heat-sensitive items or items that can be damaged by exposure to water. See Choosing Styler-Safe Clothing, page 21. • Place items on hangers or the shelf. • Fasten buttons and close zippers to keep items on moving hangers and prevent damage. 2 CLEAN LINT FILTER, CHANGE SHEET IN AROMA FILTER Lift out filter and remove lint from last load for faster and more efficient performance.
OPERATION 21 SORTING LOADS Grouping Similar Items Most articles of clothing feature fabric care labels that include instructions for proper care. Below are some of the symbols that are relevant to choosing appropriate items for the Styler.
OPERATION FABRIC CARE GUIDE = yes § = check label Refresh cycle *Control Lock Lock *Control fabric vegetable fibers cotton linen, hemp, ramie animal fibers natural fibers alpaca, camel hair, cashmere clothes removing wrinkles towels, socks, underwear, jeans, sportswear, t-shirts, blankets summer clothes, tablecloths coats, suits removing odors § scarves, knitwear Sanitary cycle Gentle Dry cycle *Control Lock Wrinkles may remain in 100% cotton fabrics.
OPERATION 23 FABRIC CARE GUIDE (CONTINUED) Refresh cycle *Control Lock Lock *Control man-made fibers fabric clothes removing wrinkles removing odors Sanitary cycle Gentle Dry cycle *Control Lock comments acetate suit lining, blouses, neckties, pajamas acrylic thermal underwear, knitwear Lay clothes on shelf stockings, lingerie Lay clothes on shelf sportswear, curtains nylon polyurethane stretchable clothing (containing less than 5%)
OPERATION CHECKING THE FILTERS BEFORE EVERY LOAD Checking the Lint Filter Always make sure the lint filter is clean before starting a new load; a clogged lint filter will increase drying times. 1 Open the front grill and take out the lint filter. 2 Brush the filter with a soft brush or clean it with a vacuum cleaner. Changing the Aroma Sheet Use a dryer fabric softener sheet to add a refreshing aroma to items. Replace the fabric softener sheet after every use.
OPERATION 25 CHECKING THE WATER TANKS 1 Pull the handle of each tank forward to remove the tank and check the level of water. water supply tank water drain tank 2 Make sure the water supply tank is filled with water. The full water supply tank can be used approximately four times, depending on the cycles used. Use clean tap water or bottled water for best performance and longer product life. Do not use distilled water or reuse the water from the drain tank.
OPERATION Hangers The hangers that come with the Styler are for use with the Styler only. Any plastic or metal hanger that has a hook less than 5/32 in. (4 mm) thick and hooks snugly into the indentations in the moving hanger can be used in the Styler. • Do not use hangers with wool, knitwear, or delicate lingerie. The garments may stretch or be left with hanger marks. Using the Moving Hanger 1 Insert hangers into slots and pull down to secure the hook snugly.
OPERATION 27 hook Using the Pants Crease Care 1 1 Open the Pants Crease Care by pressing on the icon on the side. 2 Hang the pants hanger on the hook above the Pants Crease Care that best fits the length of the pants being pressed. blades To open, fold the hook down toward the hanger blades to unlock and separate the blades. hook hanger blades hook hanger blades 2 Once pants are inserted, bring the blades together and rotate the hook up and away from the blades to lock them in place.
OPERATION Shelf Use the shelf for clothes and items that cannot be placed on hangers. Do not stack items on the shelf. For best drying performance, use the shelf for a single item or smaller items with space between. • Hang the shelf on the shelf holder when treating long clothes such as coats or dresses. Assembling the Shelf 1 Hold the shelf so that the gray trim is toward the front. Front 41.3 in.
OPERATION 29 CONTROL PANEL Control Panel Features Depending on the model, some of the following functions may not be available. *Control Lock SMART DIAGNOSIS™ ICON Place the phone over this icon when diagnosing problems with Smart Diagnosis. See Using Smart Diagnosis, page 44. POWER ON/OFF Touch Power to turn the Styler ON/OFF. Once the cycle is complete, the Styler automatically turns off after 30 minutes if no keys are touched.
OPERATION GENTLE DRY CYCLE / *SOUND ON/OFF Touch the icon to select a Gentle Dry cycle, touch repeatedly to toggle through the settings. See the Cycle Guide, page 32. Touch for three seconds to turn the button and alert sounds on/off. See Turning the Alert Sounds On/Off, page 34. SPECIAL CARE / *SMART DIAGNOSIS™ Touch the icon to select the Night Care or Downloaded cycle. The Night Care cycle is a special extended Sanitary Heavy cycle designed to dry clothes overnight.
OPERATION 31 CYCLE GUIDE SPECIAL CARE GENTLE DRY CYCLE SANITARY CYCLE REFRESH CYCLE Cycle Setting Clothing / Fabric Type Normal suit, coat, school uniform, scarf, wool, knitwear, outdoor/ performance clothing, towels, underwear, t-shirts, socks, jeans, jean jackets, lingerie, sportswear, tablecloths Light Heavy Normal Heavy Normal Delicates Est. time in Prepare Hr.: Min.
OPERATION CHOOSING A CYCLE Styler cycles are designed to fit a variety of situations. Select the cycle and setting that best match the load contents and desired results for maximum performance and fabric care. For best results, pay attention to garment care labels and choose a cycle that is appropriate for the fabric content of the items. For a guide to the symbols used on fabric care labels, see the chart on page 21 and the Fabric Care Guide on pages 22-23.
OPERATION 33 CYCLE SETTINGS AND OPTIONS To change the settings during the cycle, touch Start/Pause to pause the cycle, then touch the relevant cycle selector icon to change settings. • Touch the Start/Pause button to activate the control panel. The cycle selected and the Start/Pause button start blinking. • If the Sanitary cycle is changed to a Refresh or Gentle Dry cycle during operation, the sanitize process is not performed.
OPERATION SPECIAL FUNCTIONS Some buttons also activate special functions, including the Control Lock. Locking the Controls Use Control Lock to prevent unwanted use of the Styler or to keep cycle settings from being changed while the Styler is operating. 1 Touch and hold the Sanitary icon for three seconds to activate or deactivate the Control Lock function. 2 The Control Lock icon lights in the display, and all controls are disabled except the Power button. • Control Lock does not lock the door.
SMART FEATURES 35 TAG ON Position the smart phone by the icon when using the Tag On function with the LG Smart Diagnosis™, Smart Download Cycle, and One Touch Styling features of the LG Smart Styler application. Before Using Tag On The Tag On function allows you to conveniently use the LG Smart DiagnosisTM and Smart Download Cycle features to communicate with your appliance right from your own smart phone. To use the Tag On function: 1 Download the LG Smart Styler app to your smart phone.
SMART FEATURES Downloading Styler Cycles LG Smart Styler’s Smart Download Cycle app allows you to download a cycle for later use. The cycle is available at the Downloaded cycle position on the control panel until another cycle is downloaded. 1 Install the LG Smart Styler application on an NFC-equipped smart phone. Download the application from the Play Store, install it and run it. 5 Touch the Tag On logo.
MAINTENANCE 37 REGULAR CLEANING WARNING To reduce the risk of fire, electric shock, or injury to persons when using this appliance, follow basic precautions, including the following: yy Unplug the Styler before cleaning to avoid the risk of electric shock. Failure to follow this warning can cause serious injury, fire, electrical shock, or death. yy Never use harsh chemicals, abrasive cleaners, or solvents to clean the Styler. They will damage the finish.
MAINTENANCE 3 Make sure the drainage nozzle connected to the water drain tank and the water supply hole connected to the water supply tank are not clogged. Drainage nozzle 4 Water supply hole Allow the outsides of the tanks to dry completely before reinstalling the tanks.
MAINTENANCE 39 FAQS: FREQUENTLY ASKED QUESTIONS Q: What are aroma sheets and how do I use them? A: You can use your favorite brand of dryer fabric softener sheets in the aroma filter to infuse items with a refreshing aroma. The sheets will not soften garments or reduce static. To use the aroma filter, add a softener sheet before running a cycle. Dispose of the softener sheet at the end of the cycle. For best performance, clean the aroma filter after every 5-7 uses.
MAINTENANCE BEFORE CALLING FOR SERVICE Your appliance is equipped with an automatic error-monitoring system to detect and diagnose problems at an early stage. If your appliance does not function properly or does not function at all, check the following before you call for service. Operation Problem Possible Cause Solutions Smoke comes out when the door is opened Door is opened during operation It is normal for steam or hot air to escape if the door is opened during operation.
MAINTENANCE 41 Operation Control panel won’t respond The cycle won’t start Possible Cause Solutions Control panel or button has dirt Dirt or foreign objects on the control panel on it will interfere with the operation of the buttons. Clean the control panel. Control panel is locked Disable the Control Lock function. See Locking the Controls, page 34. Start/Pause was not touched after the cycle was set. Touch Start.
MAINTENANCE Performance Problem Possible Cause Solutions Wrinkles at back of neck after cycle Item too large for hanger or Use the right size hanger for the item fabric too delicate so the fabric won't bunch up and cause wrinkles. Some fabrics are delicate and will bunch around the hanger no matter what you do. Use the shelf for lingerie and other delicate items.
SMART DIAGNOSIS 43 Should you experience any problems with your appliance, it has the capability of transmitting data to your smart phone using the LG Smart Styler application or via your telephone to the LG Customer Information Center. Smart Diagnosis™ cannot be activated unless your appliance is turned on by pressing the Power button. If your appliance is unable to turn on, then troubleshooting must be done without using Smart Diagnosis™.
WARRANTY LG STYLER LIMITED WARRANTY (USA) WARRANTY: LG Electronics U.S.A., Inc. (“LG”) warrants your LG Styler (“product”) against defect in materials or workmanship under normal household use, during the warranty period set forth below, LG will, at its option, repair or replace the product.
WARRANTY 45 WARRANTY: Should your LG Washer (“Product”) fail due to a defect in material or workmanship under normal home use during the warranty period set forth below, LG Canada will at its option repair or replace the Product upon receipt of proof of original retail purchase. This warranty is valid only to the original retail purchaser of the product and applies only to a Product distributed in Canada by LG Canada or an authorized Canadian distributor thereof.
LG Customer Information Center For inquiries or comments, visit www.lg.com or call: 1-800-243-0000 1-888-865-3026 1-888-542-2623 USA, Consumer User USA, Commercial User CANADA Register your product Online! www.lg.
