This user manual is subject to change without prior notice. - Thank you for purchasing this product. - This user manual contains instructions on how to use the product properly. - Please read this manual carefully. Be sure to follow the instructions and notices. - Disable the lock before use (refer to p. 20).
Table of Contents 1. Before Using the Product Safety Cautions Product Features Table of Contents Product Components Names of Parts Connecting the USB (MSC) Removing the USB (MSC) File Import (MTP) Recharging/Battery Use Installing Windows 98SE Driver Display 1 3 5 6 7 9 10 11 13 15 16 Reset/Lock Volume Control/Previous or Next Track Menu Mode Listening to Music Listening to FM Radio Recording FM Radio Recording Voice File Search 19 20 21 22 23 25 26 27 28 2. Basic Use 3.
Before Using the Product Before Using the Product Cautions During Use Warning Cautions During Use Failure to follow the instructions below may result in injuries or product damage. Keep away from heat. When using the product on a neck strap hung around the neck, do not apply too much pressure on the neck strap. Do not disassemble, repair, or rebuild. Do not drop the product or place heavy objects on it. Keep away from humidity, dust, and soot. Keep away from water.
Before Using the Product Product Features Before Using the Product 제품구성품 Product Features Slim design and touch buttons The design is slim and simple, with touch buttons. Use the touch buttons to access various menus and features. Internal memory capacity Mobile storage device What is the Media Transfer Protocol (MTP) mode? MTP mode is a mode with the latest Microsoft technology supporting multimedia devices.
Before Using the Product Before Using the Product Product Components 200MHz Pentium Processor or higher - Windows 98SE/ME/2000/XP/Vista (32bit/64bit) - Mac OS X (ver 10.0 or higher supported) - Linux Kernel 2.6 or higher USB port SVGA graphic card 64MB main memory or more Mouse CD-ROM driver (2X speed) HDD 100MB or more of space . Device Earphones Neck Strap Caution when using the touch buttons Software CD Press lightly with your finger tips.
Before Using the Product Before Using the Product Names of Parts Neck strap link Names of Parts Earphone jack MIC/ Reset hole Neck Strap Record button Repeat A-B Display window Lock (Hold) Menu/Previous menu REW button Neck Strap connection Volume control/ Up, Down FF button USB slide button Earphones USB port Names of Parts 7 Earphone connection 8
Before Using the Product Connecting the USB (MSC) When used as mobile storage device Before Using the Product Removing the USB (MSC) Removing the USB 1. Connect the UP3 product to the USB port of the computer. 2. The following window will then appear.
Before Using the Product File Import (MTP) Before Using the Product File Import (MTP) MTP mode environment Connecting to MTP Mode Supported in Windows XP/SP1 or higher and Windows Media Player 10 or higher 1. Window when UP3 is connected to the computer 2. Window when My Computer is opened 1. In Setting-> USB Mode, shift to MTP mode. (Refer to the Settings section.) 2. Plug the UP3 into the computer.
Before Using the Product Before Using the Product Recharging Recharging Recharging - You can recharge the UP3 by plugging it to the computer. Recharging the battery fully takes about an hour to an hour and a half. - When recharging with the recharge station, the recharge icon will appear. Once the recharging is complete, the battery icon will appear. - The display may not turn on if the battery is fully drained.
Before Using the Product Installing Windows 98SE Driver Before Using the Product Display Before installing Play 1 2 3 4 1 5 11 10 9 8 2 6 3 7 4 5 6 7 Installation Volume EQ status Lock status Play status Battery status Filename/Artist name Play mode 8 Repeat icon 9 Playing time 10 Track number Music mode 11 FM 1 2 2 3 1 4 5 5 Frequency range Current frequency Preset channel number Preset mode/ Autoscan mode FM mode 4 3 Record 1 6 2 3 5 4 1 Recording source :Voice reco
Basic Use Basic Use Power on Reset Power on Reset [Power On] Reset hole If you turn the power on, initial booting may take time since finding the saved files may also take time. S3 supports auto playback when audio file exists. Music starts from the stop point previous. Lock feature Lock feature You can lock all the buttons to prevent unintentional wrong operation. 1. Set the Hold switch to the “HOLD” position. (“Hold” will appear on the screen followed by the Hold icon.) 2.
Basic Use Basic Use Volume Control Menu Mode Menu Mode Volume Control Increase volume 1. Pressing and holding down the Menu button for at least 2 seconds will cause the main menu to appear. 2. Press the volume buttons to go to the desired menu. 3. Press the FF button to go to the desired menu. Decrease volume Previous/Next Track FF - Press the FF button to move to the next track. - Press and hold down the FF button to explore the next track. REW - Press the REW button to move to the previous track.
Basic Use Basic Use Listening to Music Listening to Music Listening to Music Fast Forward/Rewind In the main menu, press the FF button in music mode to shift to Music mode. To play a file, press the Play/Pause button. press it one more time to pause the file. Press and hold down the FF or REW button while a track is playing to move fast forward or rewind the track. (The track will play normally if you release the button.
Basic Use Basic Use 동영상보기 FM Listening 라디오 to FM듣기 Radio FM 라디오FM녹음하기 Recording Radio Listening to FM Radio In the main menu, press the FF button in FM mode to listen to the radio. If you have not set a preset channel, automatic scan will be executed. Up to 30 channels can be saved. Manual/Preset mode conversion Manual/Automatic selection In Manual mode, press the FF or REW button to move the frequency one step at a time.
Basic Use Basic Use Recording Voice File search Recording Voice File search In the menu, select the Record menu to record your voice using the built-in microphone. You can record a radio program in Radio mode only. (You can change the recording settings in the Settings menu.) [Start recording]: In Record Standby mode, press and hold down the REC button to start recording. [Pause recording]: Press the Play/Pause button while recording to pause the recording. To resume recording, press it again.
Setting 재생설정 Play Setting Setting Power Setting Play range You can set the play range. In the Setting menu, go to Play Setting and press the FF button. Select Play Range and press the FF button. Press the Volume Up or Down button, select Onel/Folder/All, and press the FF button. To go to the previous category, press the REW button. Play mode You can set the play mode. In the Setting menu, go to Play Setting and press the FF button. Select Play Mode and press the FF button.
Setting Power Setting 33 Setting Record Setting Sleep setting Sound quality You can set the sleep settings while music or radio is playing. In the Setting menu, go to Power Setting-> Sleep and press the FF button. Press the Volume Up or Down button, select 0/30 minutes/1/2/3 hours, and press the FF button. You can specify the sound quality for recording. In the Setting menu, go to Record Setting-> Sound Quality and press the FF button.
Setting FM Setting FM Region Setting Music Title Setting Music Title Setting You can set the region for FM radio. In the Setting menu, go to FM Region and press the FF button. Press the Volume Up or Down button, select Korea/US, Europe/China, Japan, and press the FF button. FM Sensitivity You can set the FM radio sensitivity. In the Setting menu, go to FM Sensitivity and press the FF button. Press the Volume Up or Down button, select Low/Middle/High, and press the FF button.
Setting Reset Setting USB Mode Setting Reset USB Mode Setting You can reset the settings to default settings. In the Setting menu, go to Reset and press the FF button. Press the Volume Up or Down button, select Yes/No, and press the FF button. The device will then be restarted, and all settings will be changed to the default settings. You can set the USB connection mode. In the Setting menu, shift to USB Mode and press the FF button. Press the Volume Up or Down button and select MSC/MTP.
4 Customer Support Firmware Upgrade How to Upgrade the Firmware Firmware Upgrade How to Upgrade the Firmware 1. What is Firmware? - Just as an OS is used in the computer to operate it (e.g., Windows 2000, Windows XP, Linux), a program is needed to operate the MP3 device in an MP3 player. This program is called firmware. 1. Download the latest firmware file and decompress it. (※ You can get the latest firmware file at www.lge.com.) 2. Run the “LGE UP3 S3 Updater.exe” file in the decompressed folder. 3.
4 Customer Support 4 Customer Support Troubleshooting Problems Power does not turn on Troubleshooting Solutions Power will not turn on if the battery is completely discharged. Try turning on the power after recharging the battery. Press the Reset hole and check whether the Hold button is displayed as [HOLD▶].
4 Customer Support 4 Customer Support Menu Structure Menu Tree Music Play Play Range Equalizer Play Mode Power Record Display Off FM Region Power Off FM Radio Record Setting 45 Audio Files MP3 Player UP3 S3 (PS3) PS31G, PS32G, PS34G, PS38G MONO LCD 25 x 83 x 10.8mm 22.7g 1GB, 2GB, 4GB, 8GB 15 Hours for audio (based on the test conducted by LG) 2.0 High Speed (USB 1.
4 Customer Support 4 Customer Support Warranty User Rights 1. This product has passed through strict quality control and testing process. 2. Any defect found after normal use and during the warranty period shall be repaired free of charge. 3. Fees shall be charged for the type of repair other than that covered by the warranty even during the warranty period. 4. Present this Warranty when requesting for repair. 5. Do not lose this Warranty (we do not reissue warranties). 6.
