MP3 PLAYER OWNERÕS MANUAL MODEL: MF-PD330 Please read this manual carefully before operating your set. Retain it for future reference. Design and specifications are subject to change without notice for improvement.
Warning Contents To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
Warning For customers in Europe This product is conformed to EMC regulation 89/336/EEC and is therefore marked with the CE-label. Notice for customers in the United Kingdom WIRING INSTRUCTIONS This appliance is supplied with a BS1363 approved 3 amp fused mains plug. When replacing the fuse always use a 3 amp BS1362 approved type. Never use this plug with the fuse cover omitted. To obtain a replacement fuse cover contact your supplying dealer or ÒLG Electronics U.K.LtdÓ.
Battery Installation What is MP3 PLAYER ? To install the battery(AAA/R6) MP3 Player is a palm size audio device that uses no moving parts for playback and lets you enjoy a high quality sound product that uses MPEG 3 compression method for quality internet audio. 3 2 5 1 4 Open the battery cover, insert the battery and push lock the battery cover to the direction of the arrow in the NO. position.
What is MP3 PLAYER ? How do I use your MP3 Player? New generation Digital Audio Player that does not require tapes or CDs. You ll need to have MP3 files stored on your computer, a data In/Out cable and your MP3 Player. Pure sound guaranteed while handling, exercising and jogging. Using the MP3 Explorer software, select the MP3 files you wish to transfer from your PC to the MP3 Player. You can transfer songs or from your PC to your MP3 Player via your parallel port with a data In/Out Cable.
ACCESSORIES SUPPLIED Earphones with remote control Carrying case SYSTEM REQUIREMENTS Your MP3 Player needs the minimal system requirements for your computer. Windows 95/98 CD ROM Drive 486 or higher microprocessor 16MB RAM Data In/Out cable (Parallel cable) Battery Minimum 7MB hard disk space You will need more hard disk space depending on the size of the MP3 files you want to download.
INSTALLING SOFTWARE The MP3-Explorer is the communication software that allows your computer to share information with your MP3 Player. In order for your MP3 Player to work properly, The MP3Explorer software must be installed correctly under Windows. INSTALLING SOFTWARE Double-click Setup.exe file. The MP3-Explorer software is available for Windows 95/98, but itÕs not available to NTTM. Installing Automatically Insert the software CD into drive D:\ (where D:\ is name of your CD ROM drive).
INSTALLING SOFTWARE Click Next button. C:\Program Files\MP3-Explorer directory will be created. Click Finish button. The installation of MP3-Explorer software is completed and the MP3-Explorer icon is created on the Windows desktop. Click Next button.
CONNECTING DATA IN/OUT CABLE Connecting your MP3-Player to a PC To complete setup, you should connect the supplied Data In/Out cable to a PC from your MP3 Player. MP3 Player Data In/Out cable DATA In/Out terminal OPEN MP3-Explorer The MP3-Explorer is the software that interacts with the MP3 Player and a PC. MP3 files or any data files can be downloaded to the MP3 Player or vice versa. Double-click the MP3-Explorer icon on the Windows desktop.
USING MP3-Explorer The following figure describes the MP3-Explorer software. The various features are explained below. New Folder button It creates the new folder. Upper Folder button Move to upper folder. Large Icons button Display the items to the large icon. Small Icons button Display the items to the small icon. List button Display the items in the directory or folder name only. Detail button Display the information of the icons in the display panel.
USING MP3-Explorer Upload button (MP3 Player to PC) The Upload button works the same as the Download button, but uploads information to the PC instead. This will allow you to copy the selected MP3 files or data on the MP3 Player (Multimedia card) into the local directory as a destination folder. The time spent on the copying process from the MP3 Player to a PC is much slower than the download process. MMC1 button Select the MMC1 of the MP3 Player. If you press MMC1 button, the MMC1 files are displayed.
DOWNLOADING FILES To download files 5 Buy and store the MP3 files on your PC from the 8 Display the MP3 files or data files on the PC Files display panel and select a file. Internet site, CD ROM etc. 6 Double-click the MP3-Explorer icon to run the software. (If the remote controller is inserted into the MP3 Player, PC appears on the remote control display) Connect the Data In/Out cable before running the software.
UPLOADING FILES To upload the MP3 files or data files from MP3 Player to PC, try as the following descriptions. 2 Click MMC1 or MMC2 button and select a MP3 file or data file on the MMC Files display panel to upload. To upload files 1 Select a directory or folder on the PC Directory display panel.
UPLOADING FILES MP3 ERROR MESSAGES The followings are major error messages which may be displayed while using MP3 Explorer. Before disconnecting the Data In/Out cable after upload or download, close the MP3-Explorer. If there is no battery is in the MP3 Player or battery supply is insufficient, you cannot upload or download. At this time the warning message will be displayed on the desktop.
BEFORE OPERATING HOLD Using Earphone The hold function locks the main unit and remote control separately to prevent them from operating when you accidentally press a button. Unlock it before operating. If you set the HOLD to lock position or press a button on the remote control in lock position, the will blinks 5 times. (when unused) slide (when using) HOLD UNLOCK HOLD LOCK To prevent getting the earphone cord tangled, raise the slide.
PLAYING MP3 FILES To play a MP3 file 1 Open the MMC door and load the multimedia card 1 or(and) 2.
PLAYING MP3 FILES MP3 Explorer is the application which is used to download into a portable MP3 player and play any music file with extensions of MP3 (*.mp3) or CA (*.ca) stored in PC. If you download any music file whose extension is CA, it detects the ID of multimedia card (MMC), changes its extension to GU3, and saves it. It is to protect against unauthorized reproduction, which is required by the organizations related to copyrights of music.
PLAYING MP3 FILES RECALL MP3 1 2 RPT1 X-LIVE M RECALL MP3 1 2 RPT1 X-LIVE M Pressing briefly and repeatedly Repeat Play REPEAT repeat one track indicator MP3 PLAY To skip tracks Press the button briefly and repeatedly to skip track(s) forward one by one.
PLAYING MP3 FILES Random Play MP3 Book Mark function Press the RANDOM button briefly once( ) during MP3 file playing. All the tracks on all cards (MMC1 and MMC2) in the compartment from the selected card can be played randomly. If you set the Book Mark during MP3 file playing, you can search the set point of the track automatically. Press the B MARK button briefly twice( display , during MP3 file playing.
OTHER FUNCTIONS Equalizer Specifications MP3 Section Frequency response Distortion Memory(Multimedia card) To select your desired sound, press SOUND during playback. Press SOUND once to select the X-LIVE Press SOUND once again to select the normal. ( X-LIVE will disappear in the display) 20Hz~20kHz 0.1% 16MB or 32MB (extendable) General Power requirements AAA/R6 battery(1.5V) Rechargeable battery(1.2V) Output power 2.5mW+2.5mW(1kHz, 0dB/16 ) Equalizer NORMAL/X-LIVE 3.
