LG GoldStream LG GoldStream Wireless LAN PC Card User’s Guide LW1100N/LWL-1100P Page 1 of 39
LG GoldStream Contents Chapter 1 Introduction To The Wireless LAN 1.1 What’s the Wireless LAN? …………………………………… 5 1.2 Wireless LAN Standard and Structure………………………… 6 Chapter 2 Before You Start GoldStream………………………….12 Chapter 3 Installing GoldStream Card On The Windows OS 3.1 Installing PC Card Adapter. ….………………………………… 13 3.1.1 Installing the PC Card Driver for Windows OS… … 14 3.1.2 PC Card (PCMCIA) Network Configuration ……… 18 3.1.3 Uninstalling PC Card Software ……………………. 23 3.1.
LG GoldStream THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS MANUAL ARE SUBJECT TO CHANGE WITHOUT NOTICE. ALL STATEMENTS, INFORMATION, AND RECOMMENDATIONS IN THIS MANUAL ARE BELIEVED TO BE ACCURATE BUT ARE PRESENTED WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED. USERS MUST TAKE FULL RESPONSIBILITY FOR THEIR APPLICATION OF ANY PRODUCTS.
LG GoldStream NONINFRINGEMENT OR ARISING FROM A COURSE OF DEALING, USAGE, OR TRADE PRACTICE. IN NO EVENT SHALL LG OR ITS SUPPLIERS BE LIABLE FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL, OR INCIDENTAL DAMAGES, INCLUDING, WITHOUT LIMITATION, LOST PROFITS OR LOSS OR DAMAGE TO DATA ARISING OUT OF THE USE OR INABILITY TO USE THIS MANUAL, EVEN IF LG OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. GoldStream, the LG logo are registered trademarks of LG Systems Co., Ltd.
LG GoldStream Chapter 1 Introduction To The Wireless LAN A wireless LAN (WLAN) is a flexible data communication system implemented as an extension to, or as an alternative for, a wired LAN within a building or campus. Using electromagnetic waves, WLANs transmit and receive data over the air, minimizing the need for wired connections. Thus, WLANs combine data connectivity with user mobility, and, through simplified configuration, enable movable LANs.
LG GoldStream to several hundred feet. The access point (or the antenna attached to the access point) is usually mounted high but may be mounted essentially anywhere that is practical as long as the desired radio coverage is obtained. End users access the WLAN through wireless LAN adapters, which are implemented as PC cards in notebook computers, or use PCI adapters in desktop computers. WLAN adapters provide an interface between the client network operating system (NOS) and the airwaves (via an antenna).
LG GoldStream consists of a radio, a wired network interface (e.g., 802.3), and bridging software conforming to the 802.1d bridging standard. The access point acts as the base station for the wireless network, aggregating access for multiple wireless stations onto the wired network. Wireless end stations can be 802.11 PC Card, PCI. ¦ Wireless LAN Network Configuration The 802.11 standard define two modes: infrastructure mode and ad hoc mode (or independent or peer-to-peer).
LG GoldStream point connected to the wired network infrastructure and a set of wireless end stations. This configuration is called a Basic Service Set (BSS). An Extended Service Set (ESS) is a set of two or more BSSs forming a single sub-network. Since most corporate WLANs require access to the wired LAN for services (file servers, printers, Inter-net links) they will operate in infrastructure mode. Distribution System (DS) Ethernet (802.3) Access Point (AP) Service Set (SS) – Multiple Figure 2.
LG GoldStream When an 802.11 client enters the range of one or more APs, it chooses an access point to associate with (also called joining a Basic Service Set), based on signal strength and observed packet error rates. Once accepted by the access point, the client tunes to the radio channel to which the access point is set. Periodically it surveys all 802.11 channels in order to assess whether a different access point would provide it with better performance characteristics.
LG GoldStream ¦ BSS, ESS and SS ID The basic service set (BSS) is the basic building block of WLAN network. Minimum WLAN BSS may be consist of only two stations. Using access point (AP) and network distribution systems (DS), WLAN service set can be extended arbitrary size – extended service set (ESS). Each service set has its network ID (SSID). All the service sets within an ESS network can have same service ID so that the ESS can support inter-cell ROAMING.
LG GoldStream Backbone Network AP #`1 SS ID AP #`2 SS ID = LG = LG ROAMING Re-Configuration Required ESS BSS AP #`3 SS ID = Acro Backbone Network Figure 4.
LG GoldStream Chapter 2 Before You Start GoldStream To use the GoldStream adapter with a computing device (desktop personal computer, notebook, laptop computer, portable or hand-held device), the device must be equipped with an internal or external PC Card Type II or Type III slot. All drivers and supporting software (card and socket services) for the client adapter slot must be loaded and configured.
LG GoldStream Chapter 3 Installing the PC/PCI Card Adapter on a Windows OS This section provides instructions for installing a PC/PCI adapter on a computer using one of the Windows operating systems. Caution The following procedures and physical connections apply generally to normal and conventional client adapter slots. In the cases of custom or non-conventional equipment, be alert to possible differences in client adapter slot configurations. 3.
LG GoldStream 3.1.1 Installing the PC Card Driver for Windows Operating Systems ´ Windows95, 98, 2000, ME If the operating system on your computer is Windows, follow these steps. STEP 1 If you insert the GoldStream software and documentation CD for Windows, the Windows automatically runs GoldStream setup program and a dialog box appears. If above dialog box does not appear, select CD-ROM drive, and click “setup.exe” file. STEP 2 Click Next> icon.
LG GoldStream STEP 3 Give the destination folder. To set the path of your choice click on Browse and then click Next.
LG GoldStream STEP 4 Select the SSID. Default SSID is ANY. You can change this later using the configuration utility or network configuration. Click on Next. STEP 5 Select network type and click on Next. Default is infrastructure.
LG GoldStream STEP 6 Confirm the current settings; SSID, Network Mode, Utility directory and click on Next.
LG GoldStream STEP 7 It takes a few seconds for copying the utility files and then click on Finish to complete the installation.
LG GoldStream 3.1.2 PC Card (PCMCIA) Network Configuration If you have completed PC card installation, insert the PC card. If you PC detects the PC card, you can find glittering LED and PC sound. Also you will see the PC card icon on the right bottom of your screen. If you install LG’s wireless LAN card for the first time all the setup process runs automatically. If you reinstall, the install program asks next two files folder position and you should select same as the below: File name Path lgwlan.
LG GoldStream Caution This Process could cause serious problem on your network if you edit wrong data. So, if you do not know how to configure your network option, ask for help your network administrator. Click on the TCP/IP option for setting the IP address for your computer. You can select either Static or DHCP setting. If you use static IP address then enter the IP value assigned for you, and Subnet masking, DNS, Domain/Workgroup name, Gateway address value.
LG GoldStream IP Address Gateway Address Page 21 of 39
LG GoldStream DNS After setting these parameters appropriately, click on OK to return Network Component Type and you can select the File and Printer Sharing options as well as the Access to your computer by other users connected to that network by setting the computer sharing options. Click on OK. Screen message “Do you want to restart your computer” will pop up. Select Yes. It will shut down your computer and will restart.
LG GoldStream 3.1.3 Uninstalling PC Card Software If you want to uninstall the PC card, click on the control panel. Select the Add/Remove Programs. Click on the LG 11Mbps Wireless LAN and click on Add/Remove button. Uninstall Shield removes the software successfully. And then, click System icon in the control panel and removes the LG 11Mbps Wireless PC Card adapter under the Network adapters. 3.1.
LG GoldStream 3.1.5 GoldStream Configuration Utility LG install shied program installs wireless LAN driver program and Configuration Utility program. You can see the icon at the right bottom of your screen. Click on that icon will show you the screen as show below. Wireless Link Status State shows wireless LAN card’s MAC address information. Current Status shows selected channel number and transmit data rate.
LG GoldStream channel number is set by the client and can be changed by the client user. If you click on Rescan button, LAN card program searches other new channel that currently used one. Throughput (Byte/sec) shows transmit/receive data rate. Link Quality shows measured radio link quality. If the link quality is bad, your computer may not communicate with other client computers. Otherwise (; fair, good…), there is no problem to communicate with other clients.
LG GoldStream Mode: You can select wireless LAN network mode – Infrastructure or Ad-hoc mode Infrastructure Mode This mode is used to set up a connection to a wired Ethernet network. This mode requires an GOLDSTREAM Access Point to gain access to the wired network. Ad Hoc Mode This mode is used to set up a small, temporary network between two or more computers. For example, you might set up an ad hoc network between computers in a conference room so users can share information in a meeting.
LG GoldStream In order to do secure communication over the wireless LAN network, wireless LAN module provides encryption function - WEP. There are two ways to generate WEP key. This key is an important in protecting the illegal access to the wireless networks. If you want to use WEP function, the AP also set the same WEP key value with you. And all the users who want to communicate with you must use same key with each other.
LG GoldStream the wireless network resources. As the wireless channel is more prone to the illegal access, WEP provides the users safe wireless LAN network access.
LG GoldStream 3.2 PCI Card Installation This section describes the procedures for installing the client adapter. Before You Start For the client adapter to be used with a computing device, the device must be equipped with a PCI or ISA expansion slot. Check the documentation that came with your computer for details on the differences between PCI and ISA expansion slots.
LG GoldStream Activity LEDs will face out of your computer, and will be visible when you put the cover back on. The bottom edge of the card is the connector you will insert into an empty expansion slot in your computer. 3.2.1 Installing PCI Card Adapter 1. Turn off the computer and all its components. 2. Remove the computer cover. 3. Remove the screw from the top of the CPU back panel above an empty expansion slot. This screw is used to hold the metal bracket on the back panel. 4.
LG GoldStream Caution Do not force the client adapter into the slot. Forcing it will damage both the card and the slot. If the card does not go in easily, remove the card and reinsert it. 6. Reinstall the screw to the top of the CPU back panel. 7. The client adapter comes with one 2dBi dipole antenna. With the unit powered off, attach the antenna to the antenna connector on the client adapter. Caution Do not over-tighten the antenna connector; finger-tight is sufficient.
LG GoldStream 3.2.2 Installing PCI Card Driver The installation process of PCI card driver program is the same as that of PC card installation. So, you may refer above 3.1.1 Installing the PC Card Driver for Windows Operating Systems except Step 4. In the Step 4 stage, you should choose PCI instead PC Card (PCMCIA). All the other process is the same as PC card installation process. 3.2.
LG GoldStream 3.3 Troubleshooting In this chapter, we have listed various problems that you may encounter during the installation and have also listed possible solutions. The system tray wireless monitor icon is always red â Change your location or the location of the antenna by a few feet and try again. â Make sure the client adapter card is securely inserted in the expansion slot. â Make sure the antenna is securely attached.
LG GoldStream â Make sure that the PC card is started as automatic in the device applet of the Control panel. â Double click on the PC card icon in the Control panel. Click on GoldStream adapter and then click on the properties button. It should say that the driver started correctly. â Make sure the drivers were installed correctly. If there is some warning or error, uninstall drivers and software through Add/Remove Program, remove the Wireless LAN card and reinstall the drivers following the manual.
LG GoldStream Appendix Appendix A Cell Planning (Radio Range) This section provides general guidelines on factors that influence network performance Cell Site Survey Because of differences in component configuration, placement and physical environment, every network application is a unique installation. Before installing the system, users should perform a site survey to determine the optimum utilization of networking components and to maximize range, coverage and network performance.
LG GoldStream • Building Materials Radio penetration is greatly influenced by the building material used in construction. For example, drywall construction allows greater range than concrete blocks. Metal or steel construction is a barrier to radio signals. Enhancing Coverage The system architecture options of the wireless station and GoldStream Access Points provide for a variety of coverage alternatives and flexibility.
LG GoldStream Appendix B Technical Specifications Supported Operating Systems Windows 95, Windows 98, Windows 2000, Windows ME Radio Specifications Item Specification Description Direct Sequence Radio Type Spread-Spectrum 2.4 GHz ISM Band (DSSS) North Operating Frequency 2400-2483.
LG GoldStream Power Requirements - PC Card Specification Value Operational Voltage 3.3V ± 0.25V Receive Mode Current 250 mA (200 mA typically) 400 mA (370 mA typically) Sleep Mode Current 30 mA typically - PCI Card Specification Value Operational Voltage 5.0V ± 0.
LG GoldStream Appendix C Channel Allocation Channel Center Identifier Frequency 1 Regulatory Domains North ETSI / America Korea 2412MHz √ 2 2417MHz 3 2422MHz 4 Spain France Japan √ − − √ √ √ − − √ √ √ − − 2427MHz √ √ − − √ √ 5 2432MHz √ √ − − √ 6 2437MHz − 2442MHz √ √ − 7 √ √ − − √ √ 8 2447MHz √ √ − − √ 9 2452MHz − 2457MHz √ √ − 10 √ √ √ √ √ √ 11 2462MHz √ √ √ √ √ 12 2467MHz − − 13 2472MHz − √ √ − √ √ √ √ 14 2484MHz