Manualshelf

Installation Guide

ManualsBrandsLG Electronics ManualsAppliance partsSide Filler Kit for LG Slide-In Oven Range
12
INSTRUCTION GUIDE
Oven Range Side Filler Kit for Slide-In Model
PARTS INCLUDED
Left Side Filler
Right Side Filler
※
No tools required
POSITIONING OF FILLER
Front of Side Filler Back of Side Filler
Angled Front Surface
Flat Back Surface
INSTALLATION INSTRUCTIONS
Use the left and right side fillers to fill the gaps between the sides of
the range and the countertop.
1
In order to securely install the filler kit, the countertop surfaces
around the range must be clean and dry.
2
Adjust the range height so that the top of the cooktop is level
and is 4 mm higher than the countertop. See the installation
instructions in the owner’s manual for details on adjusting the
height of the range.
4 mm
Countertop
3
Before removing the adhesive backing on the fillers, place them
in the correct position at the sides of the range.
The angled front surface should be in the front for both pieces.
•
The front edge of each side filler should be flush with the
front edge of the cooktop.
4
After determining the correct location of the filler pieces, remove
the adhesive backing and carefully put the fillers back in place.
Press the filler pieces firmly down onto the countertop to make
sure the double-sided tape sticks.
Left Right
Edge of Cooktop
If you have questions, call 1-800-243-0000(USA),
1-888-542-2623(CANADA) and select the appropriate option from
the menu, or visit our website at
http://www.lg.com
GUÍA DE INSTALACIÓN
Kit de relleno lateral de estufa para modelo
Slide-in
PARTES INCLUIDAS
Relleno lateral
izquierdo
Relleno lateral
derecho
※
No requiere herramentaje
POSICIÓN DEL RELLENO
Parte frontal del relleno lateral Parte trasera del Relleno
laterial
Superficie frontal angulada
Superficie trasera plana
INSTRUCCIONES DE INSTALACIÓN
Use los rellenos lateriales izquierdo y derecho para llenar los
espacios vacíos entre los laterales de la estufa y la encimera.
1
A fin de instalar correctamente el kit de relleno , las superficies
de la encimera alrededor de la estufa deben de estar limpias y
secas.
2
Ajusta la altura de la estufa de tal manera que la parte superior
de la estufa esté nivelada y esté 4 mm más arriba que la
encimera. Por favor revise las instrucciones de instalación en
el manual de usuario para detalles del ajuste de la altura de la
estufa.

Summary of content (2 pages)