DLP Projection TV OWNER’S MANUAL MODELS: RU-44SZ63D RU-52SZ53D Please read this manual carefully before operating your set. Retain it for future reference. Record model number and serial number of the set. See the label attached on the back cover and quote this information to your dealer when you require service. LG Electronics U.S.A., Inc. Downloaded from www.Manualslib.
WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
IMPORTANT SAFETY INSTRUCTIONS Important safeguards for you and your new product Your product has been manufactured and tested with your safety in mind. However, improper use can result in electrical shock or fire hazards. To avoid defeating the safeguards that have been built into your new product, please read and observe the following safety points when installing and using your new product, and save them for future reference.
IMPORTANT SAFETY INSTRUCTIONS (Continued from previous page) 14. Outdoor Antenna Grounding If an outside antenna or cable system is connected to the product, be sure the antenna or cable system is grounded to provide protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code (U.S.A.
Table of Contents Safety Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Important Safety Instructions . . . . . . . . . . . . . . . . .3-4 Function Status Indicators . . . . . . . . . . . . . . . . . . . . .6 Step 1. Hook Up TV Rear Connections Panel . . . . . . . . . . . . . . . . . . . . . . .7 Front Connections Panel . . . . . . . . . . . . . . . . . . . . . .8 ANT/Cable Service Hookup . . . . . . . . . . . . . . . . . . . . .9 Cable Box Connections . . . . . . . . . . . . . . . . . . .
Function Status Indicators Lamp indicator, operation indicator, and temperature indicator located below the front panel controls, reveal the operating status of the DLP projection TV. Operation Indicator Temperature Indicator Lamp Indicator Operation Indicator Lamp Indicator ff Red Green Orange (flashing) Orange Red (flashing) Green (flashing) Orange Temperature Indicator Red Red (flashing) PAGE 6 Downloaded from www.Manualslib.com manuals search engine Power cord is not connected.
Rear Connections Panel Connecting cables and external equipment to your TV. This manual explains the features available on the RU-44SZ63D TVs. RF Connector: Antenna Used to connect analog cable or antenna signals to the television, either directly or through your cable box. ANT IN +75 Ω RGB INPUT PC/DTV (XGA /480p /720p /1080i) PC and HD-STB Input Used to connect from a PC source or HD-STB Satellite system.
Front Connection Panel There are four jacks on the left side on your projection TV that make connecting Audio/Video devices like video games and camcorders very simple. The jacks are like those found on the back jack connection panel. This means that most equipment that connects to those types of jacks on the rear jackpack, may be connected to the front connection panel. To use the front jacks as the signal source, select them using Main Input menu as described on page 25.
ANT / Cable Service Hookup Cable TV Wall Jack Panel Antenna 1 Connect an antenna or cable service to your TV as shown. 2 Turn to page 22 to do a channel search with EZ Scan for Ant/Cable connection(s).
Cable Box Connections 1 Cable TV Wall Jack Panel Locate the output jack on the back of your cable box. Connect this to the Antenna jack on the back of your TV. Or find the composite video and audio jacks on the back of your cable box, and connect them following the instructions provided with your equipment. This can be combined with any other equipment you may want to hook up.
VCR Connections 1 Locate the Antenna jack on the back of your TV. Connect this to RF out jack on the back of your VCR. Or, find the composite video and audio jacks on the back of your VCR, and connect them following the instructions provided with your equipment. You may connect either the composite video or the S-Video cables to your TV. (Do not connect both the composite and the S-Video cables. In the event that you connect both composite and the SVideo cables, only the S-Video will work.
DVD Player 1 Find the audio and component or S-Video jacks on the back of your DVD Player and connect them following the instructions provided with your equipment. You may connect either the composite video or the S-Video cables to your TV. Do not connect both the composite and the S-Video. Some high-end DVD players use a picture reproduction system called “component video.” If your DVD player has component output, use the connectors marked “Component 1/2” on the jack panel.
RGB-DTV/DVI-DTV Input 1 2 Find the audio and Y, PB, PR/RGB/DVI jacks on the back of your DBS receiver and connect them following the instructions provided with your equipment. DBS Receiver Component Out Dolby Digital Y Pb Pr Out Audio L R COMPONENT C A L I B R A T I O N Connect these cables to your TV as shown.
RGB-PC/DVI-PC Input 1 Find the audio and RGB or DVI jacks on the back of your PC and then connect them following the instructions provided with your equipment. 2 Connect these cables to your TV as shown.
External Stereo Connections Connect Left/Right Variable Audio Output to an external Audio Amplifier System. 1 2 3 Locate both Variable Audio Out jacks on the back of your TV and the Left/Right audio input jacks on the back of your stereo's amplifier. Connect these jacks, making sure that they are connected correctly. (red=Right, white=Left.) Adjust the sound on your stereo, according to directions provided with the amplifier.
Home Theater: Speaker Layout This is a typical speaker layout. Any number of other speaker setups are possible, and some changes may be needed to maximize your sound. However, a Dolby Digital Receiver is required to hear 5.1 channel audio. Left and right speakers on each side of the TV enhance separation. The TV's sound optional hookup “center mode in,” makes the dialog sound as though it’s coming directly from the TV.
Monitor Out Setup 1 Your TV has a special signal output capability which allows you to hook up a second TV or monitor. 2 Just connect the second TV or monitor to the MONITOR OUT Audio/Video jacks located on the back of your TV. See the Operating Manual of the second TV or monitor for further details regarding that device’s input settings.
Remote Control Functions in TV Mode MODE Selects the remote operating mode: TV, VCR, Cable, DVD and Satellite. Select other operating modes, for the remote to control external devices. TV/VIDEO Selects: Analog, Video1, Video2, Front video, Component1-2, RGB, and DVI input sources. FRONT Selects the front video signal if a device, such as a camcorder or game player, is connected to the front video input jack.
Remote Control Functions in TV Mode VCR CABLE DVD SAT TV MODE LIGHT POWER TV/VIDEO FRONT DVI COMP1 COMP2 RGB POWER RGB COMPONENT 1, 2 Selects component signal sources, such as DVD or HD receiver. 1 2 3 NUMBER KEYPAD 4 5 6 7 8 9 ENTER 0 FLASHBK For direct channel selection and programming functions. Turns your TV or any other programmed equipment on or off, depending on mode. Selects: RGB-DTV and RGB-PC input sources.
On-Screen Displays This page describes your on-screen display and information banner options. Channel Label If a channel label has been set, then it will appear here. Main Channel Display Displays current channel number. TV 13 MONO ABC PIP Display This display appears when PIP is active. TV 6 AM 3:00 10 Mute Appears when sound is muted. PAGE 20 Downloaded from www.Manualslib.com manuals search engine Volume Volume level is displayed while adjusting the sound.
Front Panel Controls POWER MENU 1 ENTER 3 2 VOL CH 4 5 1 2 POWER 3 ENTER (Same as ENTER button on your remote control) 4 5 6 7 VOLUME UP / DOWN 8 Temperature indicator. (See page 6). 6 8 7 MENU CHANNEL UP / DOWN Operation indicator. (See page 6). Lamp indicator. (See page 6). See menu pages for instructions on using the onscreen menus. The POWER, CHANNEL, TV/VIDEO, and VOLUME buttons work just as they do on your remote control.
EZ Scan (Channel Search) Automatically finds analog channels available through ANT IN input, and stores all active over-the-air and cable channels in memory on the channel list. SETUP EZ Scan G Processing EZ scan. Ch. Edit VIDEO AUDIO TIME Ch. Label Main Input Sub Input Booster SPECIAL LOCK 1 MENU Prev. Refer to pages 7-17 to connect external equipment to your TV. If you have done so, plug in your TV to a standard (nonswitched) 120V 60Hz power outlet.
Channel Add / Delete / Surf Setup Ch. Edit VIDEO AUDIO TIME Ch. Label ESPN G Following Screen will let you edit channels and Surf List. Surf List TV 11 TV 20 Booster SPECIAL LOCK 2 Press the MENU button on the remote control, then use the UP/DOWN arrow button to select the Setup menu.
Channel Labels Setup ESPN TV 25 Ch. Edit VIDEO AUDIO TIME Ch. Label G Main Input Following Screen will let you put the logos in channels. Sub Input MENU HSE NOS ABC CNBC ESP2 ACTS PBS TELE VCR ET IC PLAY TLC VH-1 ADC COM EWTN INSP CSPN PTL TMC VISN AMC FAM JCN QVC TNN VJN BCC CSP2 FNN LIFE RDS TNT WB BET CTN FOX Previous ( ) Add/Delete ( Prev.
Main Picture Source Selection Changes the picture source for the main screen so you can watch your TV, cable TV, VCR, DVD, or any other devices that are connected to your TV. SETUP VIDEO EZ Scan Ant/Cable Ch. Edit Video1 Ch. Label Video2 Main Input AUDIO Front Video G Component 1 Sub Input Component 2 Booster TIME SPECIAL LOCK 1 Press the MENU button on the remote control, then use the UP/DOWN arrow button to select the Setup menu.
PIP (Picture-in-Picture) / Twin Picture Operation PIP lets you view 2 different inputs (sources) on your monitor screen at the same time. One source will be large, and the other source (PIP) will show a smaller inset image. Twin Picture splits the screen into 2, allowing 2 pictures to be shown on the TV screen at the same time. Each source is given half the screen. Watching PIP Press the PIP button to show the sub picture. Each press of PIP changes the PIP options as shown below.
PIP (Picture-in-Picture) / Twin Picture Operation Selecting PIP / Twin Picture Channels 1 Press the PIP button on the remote control to select PIP or Twin picture mode. Select the Ant/Cable source with the PIP INPUT button. 2 Use the PIPCH-/PIPCH+ button to select a channel for the sub picture. Swapping Pictures Press the SWAP button. Each time you press the SWAP button, you switch the Main and Sub pictures.
Booster If TV signal reception is poor because you are in a fringe area, set Booster to On. If the picture condition is good, set Booster to Off. SETUP EZ Scan Adjustments for one channel don’t affect the adjustment for other channels. Set booster to on or off for each channel separately. VIDEO Ch. Edit Ch. Label Main Input AUDIO Sub Input Booster TIME G Off On SPECIAL LOCK 1 2 3 4 5 Press the MENU button on the remote control, then use the UP/DOWN arrow button to select the Setup menu.
Video Menu Options Adjust the picture appearance to suit your preference and viewing situations. SETUP EZ Picture VIDEO AUDIO TIME Off G Contrast Daylight Brightness Normal Color Night Time Sharpness Movie Tint Video Game Color Temperature Sports SPECIAL LOCK MENU Prev. You can manually adjust the levels for the picture quality settings, such as Contrast, Brightness, Color, etc. You can also select a preset value from the EZ Picture menu based on the category of the program.
Video Menu Options SETUP Contrast 90 VIDEO F G E AUDIO TIME SPECIAL LOCK • EZ Picture Lets you choose a preset value for the picture settings. Off Lets you adjust the picture manually to your preferences. Daylight Increases the levels of all picture settings to fit daylight conditions. Normal Restores the picture levels to their original settings. Night Time Increases the levels of all picture settings to fit daylight conditions. Movie Adjusts Video settings to enhance Movie viewing.
Audio Menu Options Adjust the sound to suit your taste and room situations. SETUP EZ SoundRite G EZ Sound VIDEO Off On Balance Treble AUDIO Bass Front Surround TIME TV Speaker SPECIAL LOCK 1 Press the MENU button on the remote control, then use the UP/DOWN arrow button to select the Audio menu. 2 Press ENTER or the RIGHT arrow button to access the Audio menu.
Audio Menu Options SETUP VIDEO E AUDIO Bass 50 F G TIME SPECIAL LOCK • EZ SoundRite Scans for changes in the sound level during commercials, then adjusts the sound to match the current audio level of the TV program you are watching. • EZ Sound Chooses the sound options manually. Off Lets you adjust the Audio menu sound options manually. Normal Restores the sound levels to their original settings.
Auto Clock Setup Sets the time automatically from the PBS broadcast signal. SETUP Auto Clock The PBS channel signal includes information for the correct time. VIDEO AUDIO TIME G PBS Ch. TV2 Manual Clock Time Zone Auto Off Timer Daylight Saving On Timer Auto Clock Off Off Sleep Timer Auto Off SPECIAL LOCK 1 Press the MENU button on the remote control, then use the UP/DOWN arrow button to select the Time menu. 2 Press ENTER or the RIGHT arrow button to activate the Time menu.
Manual Clock Setup SETUP Auto Clock Manual Clock VIDEO AUDIO TIME G Year 2004 Off Timer Date 01 / 10 On Timer Time AM 10 : 44 Sleep Timer Auto Off SPECIAL LOCK 1 2 3 4 MENU Press the MENU button on the remote control, then use the UP/DOWN arrow button to select the Time menu. VCR CABLE DVD SAT TV Press ENTER or the RIGHT arrow button to activate the Time menu. Use the UP/DOWN arrow button to choose Manual Clock, then press the RIGHT arrow to activate the Manual Clock menu.
TV Turn Off Timer Setup Lets you set an automatic daily turn off time for your TV. Off Timer function overrides On Timer function if they are both set to the same time. SETUP Auto Clock Manual Clock VIDEO AUDIO Off On Off Timer On Timer AM 12 : 00 Sleep Timer Auto Off TIME SPECIAL LOCK 1 Press the MENU button on the remote control, then use the UP/DOWN arrow button to select the Time menu. 2 Press ENTER or the RIGHT arrow button to activate the Time menu.
TV Turn On Time Setup Time function operates only if current time is set. Unless a button is pressed within two hours after the TV is turned on by the On timer function, the TV will automatically turn itself off. SETUP Auto Clock Manual Clock VIDEO AUDIO Off Timer On Timer Off On G Sleep Timer Auto Off TIME Tim AM 04 : 00 SPECIAL LOCK 1 Press the MENU button on the remote control, then use the UP/DOWN arrow button to select the Time menu.
Sleep Timer Setup Select a preset time to turn your TV off automatically. Off SETUP Auto Clock VIDEO AUDIO Manual Clock 10 min Off Timer 20 min On Timer 30 min Sleep Timer 60 min G 90 min Auto Off TIME 120 min 180 min SPECIAL 240 min LOCK 1 Press the MENU button on the remote control, then use the UP/DOWN arrow button to select the Time menu. 2 Press ENTER or the RIGHT arrow button to activate the Time menu.
Auto Off If there is no input signal, the TV can be set up to switch to standby mode automatically after 10 minutes. SETUP Auto Clock Manual Clock VIDEO Off Timer On Timer AUDIO Sleep Timer Auto Off TIME Off G On SPECIAL LOCK 1 Press the MENU button on the remote control, then use the UP/DOWN arrow button to select the Time menu. 2 Press the RIGHT arrow button to activate the Time menu.
Aspect Ratio 1 Press the MENU button on the remote control, then use the UP/DOWN arrow button to select the Special menu. Or press RATIO button to instantly access the Aspect Ratio . 2 Press ENTER or the RIGHT arrow button to activate the Special menu. 3 Use the UP/DOWN arrows to choose Aspect Ratio. 4 Press ENTER or the RIGHT arrow button to move into the Aspect Ratio selection menu.
On-Screen Menu Languages Select your preferred language for the menus: English, Spanish, or French. SETUP Aspect Ratio Language VIDEO AUDIO TIME English G Captions Español Caption/Text Français Key Lock Cinema Demo SPECIAL LOCK 1 Press the MENU button on the remote control, then use the UP/DOWN arrow button to select the Special menu. 2 Press ENTER or the RIGHT arrow button to activate the Special menu. 3 Use the UP/DOWN arrow to choose Language.
Captions Setup SETUP Aspect Ratio Language VIDEO AUDIO Captions Off G Caption/Text EZ Mute Key Lock On Cinema TIME Demo SPECIAL Using the menu 1 Press the MENU button on the remote control, then use the UP/DOWN arrow button to select the Special menu. 2 Press ENTER or the RIGHT arrow button to activate the Special menu. 3 Use the UP/DOWN arrow to choose Captions, then press ENTER or the Right arrow button. 4 5 LOCK MENU Prev.
Caption/Text Mode Selection Select a closed caption mode for displaying captioning information when provided on the program. Captions displays information at any position on the screen usually the program's dialog. Text displays information, usually at the bottom position and is used for a data service, generally not program related. SETUP Aspect Ratio VIDEO AUDIO Language CC 1 Captions CC 2 Caption/Text CC 3 G CC 4 Key Lock Text 1 Cinema TIME Text 2 Demo Text 3 SPECIAL LOCK 1 MENU Prev.
Key Lock The TV can be set up so that it can only be used with the remote control. The feature can be used to prevent unauthorized viewing by disabling the front panel controls. The TV is programmed to remember which option it was last set to even if you turn the TV off. SETUP Aspect Ratio Language VIDEO Captions Caption/Text AUDIO Key Lock Off G On Cinema TIME Demo SPECIAL LOCK 1 MENU Prev.
Cinema Mode Setup Set up the TV for the best picture appearance for viewing movies. When you operate Cinema (3:2 Pull-Down Mode or Cinema Correction Mode), the TV will adjust 24 fps video from movies to 30 fps video for display (This function is only available in Component 480i mode.
Demo (Menu Review) EZ Demo Use to scan the features and menu options available on your TV. XD Demo Use to see the difference between XD Demo On and XD Demo Off. SETUP Aspect Ratio Language VIDEO AUDIO TIME Captions Caption/Text Key Lock Cinema Demo EZ Demo G SPECIAL LOCK 1 Demo MENU Press the MENU button on the remote control, then use the UP/DOWN arrow button to select the Special menu. 2 Press ENTER or the RIGHT arrow to activate the Special menu.
Parental Lock Setup Lets you set up blocking schemes to block specific channels, ratings and external sources. A password is required to gain access to this menu if the Lock System is active. 1 Press the MENU button on the remote control, then use the UP/DOWN arrow button to select the Lock Menu. SETUP Lock System Set Password VIDEO AUDIO Block Ch. Movie Rating TV Rating- Children TV Rating-General TIME Aux. Block SPECIAL 2 Press ENTER or the RIGHT arrow button to access the Lock Menu.
Parental Lock (Ratings Overview) Parental Lock Rating Descriptions SETUP Lock System G Set Password VIDEO AUDIO TIME Unlocks for channel and rating. Block Ch. Movie Rating Off TV Rating- Children On TV Rating-General Aux. Block SPECIAL LOCK MENU Prev. TV-Y7 (Children 7 Years & Older): Program is designed for children age 7 and above. TV-G (General Audience): Most parents would find this program suitable for all ages.
Programming the Remote The remote control for your HD receiver is a multi-brand or universal remote control that can be programmed to operate most remote-controllable devices of other manufacturers. Note: The remote control may not be able to control all models of other brands. 1 2 3 4 Test your remote control.
Programming Codes: TVs TVs Brand A MARK ADMIRAL AKAI AMPRO AMSTRAD ANAM AOC BLAUPUNKT CANDLE CAPEHART CETRONIC CITIZEN CLASSIC CONCERTO CONTEC CORONADO CRAIG CROWN CURTIS MATHES CXC DAEWOO DAYTRON DYNASTY DYNATECH ELECTROHOME EMERSON FISHER FUNAI FUTURETECH GE Codes 112 143 072 081 006 146 073 167 052 043 054 080 104 112 115 121 131 004 006 112 088 002 003 006 058 043 002 003 006 043 103 143 043 004 039 043 051 143 043 054 043 143 004 006 116 143 043 004 016 043 044 071 076 107 111 117 120 125 127 136
Programming Codes: VCRs VCRs Brand AIWA AKAI AMPRO ANAM AUDIO DYNAMICS BROKSONIC CANON CAPEHART CRAIG CURTIS MATHES DAEWOO DAYTRON DBX DYNATECH ELECTROHOME EMERSON FISHER FUNAI GE GO VIDEO GOLDSTAR HARMAN KARDON HITACHI INSTANTREPLAY JCL JCPENNY JENSEN JVC Codes 034 016 043 124 125 072 031 033 012 023 043 035 037 028 031 108 003 040 031 033 005 007 064 065 110 111 116 117 108 012 023 043 034 053 059 006 017 027 029 034 035 037 046 129 131 153 003 008 010 034 031 033 072 107 144 147 132 136 012 013 1
Programming Codes: SAT/DVDs SAT Brand ALPHASTAR DSR AMPLICA BIRDVIEW BSR CAPETRONICS CHANNEL MASTER CHAPARRAL CITOH CURTIS MATHES DRAKE DX ANTENNA ECHOSTAR ELECTRO HOME EUROPLUS FUJITSU Codes 123 050 051 126 053 053 013 014 018 036 008 009 077 054 050 145 005 006 010 011 112 116 024 046 076 038 040 058 093 095 096 098 099 122 089 114 017 021 Brand 129 015 055 012 007 052 141 056 057 094 097 100 022 Codes 027 133 GENERAL INSTRUMENT 003 004 029 031 101 HITACHI 139 140 HOUSTON TRACKER 033 037 051 05
Programming Codes: Cable Boxes CATV Brand ABC ANTRONIK ARCHER CABLE STAR CENTURION CENTURY CITIZEN COLOUR VOICE COMBANO COMTRONICS DIAMOND EAGLE EASTERN ELECTRICORD GE GEMINI GI GOLDEN CHANNEL HAMLIN HITACHI HOSPITALITY JERROLD Codes 003 004 042 046 053 014 005 007 024 026 092 007 007 065 090 080 081 019 030 023 020 030 057 062 032 072 008 022 054 052 074 030 049 050 052 055 070 077 002 003 Brand 039 052 014 LG M-NET MACOM MAGNAVOX MEMOREX MOVIE TIME NSC OAK 040 066 PANASONIC PARAGON PHILIPS 025
Maintenance Early malfunctions can be prevented. Please read pages 2-3-4 in the front of the manual and follow the recommendations provided. Careful and regular cleaning of your new TV can enhance its appearance and your viewing pleasure. Be sure to turn the power off and pull out the plug before you begin any cleaning. SCREEN CLEANING 1. Here’s a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent.
Troubleshooting Some quick and easy tips to fixing problems yourself. SYMPTOMS POSSIBLE SOLUTIONS Snowy picture and unclear sound. • Check your antenna connection or location. • Check your cable input. • Check to see if the TV/VCR button on your VCR has the TV selected. Multiple images or ‘ghost shadows.’ • Check your antenna direction and/or location. • Check your cable input. • Make sure the cable from your antenna to your TV is properly connected.
Troubleshooting (Contd.) Remote control doesn’t work. • Make sure the batteries are fresh and installed properly. Menu options can’t be changed or selected. • Try unplugging your TV for a few minutes, then plug it back in. No picture or sound when any non-cable source is selected. • Check to see if the source equipment has been turned on. • Make sure that the connections are secure on the back of your TV and on the source equipment. Weak or no Stereo Sound when using a stereo VCR.
Glossary A list of definitions for some of the words found in this guide as they relate to these TVs. 75 OHM RF CABLE The round cable that comes from an off-air antenna or cable service provider. Each end looks like a hex shaped nut with a wire sticking through the middle, and it screws onto the threaded jack on the back of your TV. A/V CABLES Audio/Video cables. Three cables - Right audio (red), Left audio (white), and Video (yellow).
Glossary (Contd.) A list of definitions for some of the words found in this guide as they relate to these TVs. HD-STB High-definition set-top box. INPUT Refers to the jack that receives a signal into the TV, VCR or other A/V device. JACK A connection on the back of a TV, VCR, or any other A/V device. This includes the RF jacks and the Audio/Video jacks that are color-coded. MODE The mode determines the type of device (TV, VCR, Cable, Aux) that the remote is controlling; remote operating mode.
Product Specifications Models RU-44SZ63D Horizontal Size (Inches) Height (Inches) Depth (Inches) Weight (lbs.) 41.7 30.1 14 69 RU-52SZ53D Horizontal Size (Inches) Height (Inches) Depth (Inches) Weight (lbs.) 48.6 35 15.3 85.
CONCERNING PIXEL FUNCTIONALITY: Your DLP Rear Projection Television contains about 921600 individual pixels. DLP Projection displays typically contain a small number of pixels that do not function normally. Your display has been inspected and is in compliance with manufacturer’s specifications, indicating that any pixel defects do not effect the operation or use of your display.
LG® Brand DLP Rear Projection Television U.S. Limited Warranty Your LG® brand DLP Rear Projection Television will be repaired or replaced as set forth below, if it proves to be defective in material or workmanship under normal use, during the warranty period ("Warranty Period") listed below, effective from the date ("Date of Purchase") of original consumer purchase of the product.