INSTALLATION 11 INSTALLATION Installation Parts and Tools Parts not Provided © @ & Electrical cable Water supply tube Fittings for tube Couplet Electrical tape Tools Needed Flat-blade Phillips Hole saw Electrical drill Gloves screwdriver screwdriver min.
12 INSTALLATION Installation Overview Preparing Cabinet Opening Leveling the Dishwasher Preparing Electrical Wiring Securing the Dishwasher to Counter top Preparing Water Supply Connection Connecting the Drain Hose Preparing the Dishwasher Connecting Water Supply Removing Lower Cover Connecting Power Sliding the Dishwasher into Cabinet Final Check Product Dimensions Back view Side view 2645~ 26131e" (876 861 mm) 239" (603 mm) 248" (825 33640 335" (848 mm) o | case {115 mm)] 0 (115 134 mm 2150° (75 9 Y Ape A
INSTALLATION 13 Preparing Cabinet Opening This dishwasher is designed to fit a standard dishwasher opening. An opening may be needed on both sides to route plumbing and electrical connections. »To ensure proper drainage, install the dishwasher no more than 12 ft. (3.65 m} from the sink. = The location must have sufficient space for the dishwasher door to open easily and provide at least 0.1” (2 mm} between the dishwasher and the cabinet sides.
14 INSTALLATION Preparing Water and Electrical Connections There are 2 channels in the bottom of the dishwasher for routing the water and electrical connections. As shown in the bottom view below, channel € is for the water supply line, and channel €} is for the electrical cable. Tums off the house water supply and the circuit breaker or dedicated power before connecting the dishwasher.
INSTALLATION 18 Preparing Dishwasher Removable Shipping Brace Tha rear shipping brace can be removed if additional WARN ING clearance is needed when installing the dishwasher under a low counter top. « Do net remove safety cover Removal can result in fire, electric shock or death. ] Releasing Drain Hose Remove the wist tie holding the drain hose to the back of the shipping brace. Removing Lower Cover Remove the screws at either side which attach the lower cover to the dishwasher. 2 Remove the lower cover.
18 INSTALLATION Removing Packing Materials from the Interior Remove all packing materials from the interior of the dishwasher before installing the appliance. Attaching Installation Brackets For counter tops made of wood or other material that will not be damaged by drilling, use the metal installation brackets provided. For counter tops made of granite, marble, or other materials that could be damaged by drilling, use the wood screws fo attach the dishwasher to the cabinet.
Sliding Dishwasher into Cabinet Opening £ CAUTION = Do not pull or lift the dishwasher using the handle €. Doing so can damage the door and hinges. « Do not push the door of the dishwasher with knees when sliding the dishwasher into position. Doing so can damage the front cover. « Do not push the top of the dishwasher. Deng so can damage the interior of the dishwasher. INSTALLATION 17 NOTE » Open the door and grab the body frame and the top front opening € of the tub to move o lift the dishwasher.
18 INSTALLATION Make sure the drain hiss is straight before feeding the end of it through the hole for the water supply. As you slide the dishwasher into the opening, you will want to slowly pull on the drain hose from inside the cabinet to take up some slack. Be careful not to kink, pinch, crush or stress the drain hose during installation to avoid leaking and water damage.
INSTALLATION 18 i NOTE connection Water Su poly « The best location for the electrical conduit is on the Line and Power fight side of the back wall. Re-route the electrical cabs before installation if the electrical conduit pipe Connecting Water Supply Line is longer than 3° (76 mm) and is centered on the back wall. 4 With the home water supply muted off, connect . . i the water supply line to the inlet valve on the left 4 Tum off electrical power fo the unit at the circuit front of the dishwasher. breaker.
20 INSTALLATION Insert a strain relief € through the hole in the junction box. Tighten the ring nut € to secure it in place. . Insert the electrical cable through the hole in the strain relief. Tighten 2 screws to secure the cable. 3-5" v‘ (76 127 mm) 7 Pull the existing wires through the openings in the junction box. Tighten 2 screws O to reassemble the junction box in the appliance. 8 Pair the white, black, and green wires to the matching colored wires from the dishwasher.
INSTALLATION 21 Connecting Drain Hose If the end of the drain hose does not fit the drain line, use a heat and detergent resistant adapter (not supplied). These may be obtained from a local plumbing supply store. » Cut the adapter so the end matches the size of the drain connection. 0 o NOTE »For drain hose installation, use the screw style hose clamp provided with this dishwasher in the silverware basket.
22 INSTALLATION @ Chaffinch the drain hose to the wast tee with the hose clamp provided. Move the clamp into position and tighten it with a flat-blade screwdriver. % Attach the drain hose to the disposal with the hose clamp provided. Move the hose clamp into position and tighten it with a flat-blade screwdriver.
INSTALLATION 23 Leveling Dishwasher Check that the dishwasher is level and adjust the leveling feet if necessary. 4L CAUTION « Failure to level the dishwasher may result in leakage, problems closing the door, or noise. «Where the cabinet opening is narrower than recommended (see Preparing Cabinet Opening), the dishwasher must be carefully leveled and aligned so that the dishwasher is supported fully by the 3 leveling feet and is not hanging from the installation brackets.
24 INSTALLATION Adjusting Leveling Feet Adjusting Rear Leveling Foot Adjust ded until the dishwasher i betel » Use a Phillips screwdriver to adjust the rear leveling needed un sh washer s completely foot and the rear of the tub using the center screw at the base of the appliance in the front. «Tum the center screw clockwise to raise the rear of Adjusting Front Leveling Feet the tub and counterclockwise to lower it.
INSTALLATION 28 Securing Dishwasher to Cabinet Opening There are 2 options for securing the dishwasher. If the counter top is made of wood or a material that can safely be drilled into, secure the dishwasher to the counter top with the provided brackets. If the counter top is granite, marble, or a material that cannot be drilled into, secure the dishwasher to the cabinet frame with the provided wood screws.
26 INSTALLATION Final Installation Check Check if the dishwasher is properly installed. 4 Tum on the circuit breaker. 2 Turn on the house water supply. 3 Make sure that the door opens and closes smoothly. = If necessary, level the dishwasher again. = If the door will not close, make sure the rack is level. i * Make sure that all packaging materials have been removed. & Power on the dishwasher and run a Turbo cycle to verify proper operation & Check for leaks at the drain hose and water supply connection..