Install Manual

EnerVu Setup Guide
Installer
Create Installer account at
https://enervu.lg-solar.com
Complete Password setup via link sent
to your email
Download and install EnerVu2 Professionals app
for iOS or Android (Android 5 / iOS 9 and above),
sign up to the Enervu server (enervu.lg-solar.com)
Sign in to the EnerVu2 Pro app using
your Installer account login and password
EnerVU2
Professional
Android
EnerVU2
Professional
iOS
EnerVU2
Owner
Android
EnerVU2
Owner
iOS
Before Installation*
Setup anywhere
Homeowner
Create Homeowner account at
https://enervu.lg-solar.com
Complete Password setup via link sent to your
email
Download and install EnerVu2 Owner app for iOS or
Android (Android 5 / iOS 9 and above)
Sign in to the EnerVu2 Owner app using your Homeowner
account login and password
EnerBox_xxxxx (xxxxx : Five digits after EnerBox2
serial number) e.g.
Receive email from Installer
Login to Homeowner account to complete system activation
Plug-in EnerBox as near to service/breaker panel as
possible, and peel S/N number sticker from its
backsheet on bottom of gateway and place onto
paper Array Map
Check the LED status of Inverter in
EnerBox (open flap on left side of EnerBox:
Initial scanning = AMBER blinking,
Detecting = Green blinking)
Press AP button
Open WiFi to connect EnerBox2 (PW 87654321)
Confirm total number of AC modules / Start SCAN
Internet connection / home owner Wifi setup
pw required, hardwire gateway to router preferred,
if possible
Check the LED status of Internet
(Solid Green is status of completion)
During process, you will be prompted to enter
gateway S/N from
Create a new system
(using EnerVu2 or EnerVu2 Pro)
Save the new system – an email will be sent to
the homeowner
Design the array layout on PC using EnerVu2
Activate the System
Obtain home owner internet access information
*To Save Time⋯Please complete before install
At home
For ESS only: Access PCS via Bluetooth and confirm
ID and battery serial number(s)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
6
1
2
3
4
5
6