900MHz DSST PHONE with CALLER ID, SPK PHONE and ANSWERING SYSTEM. OPERATION DESCRIPTION ( MODEL : GT- 8320C ) SK : TCTU0001801-MG Iss. DATE ’00. 07. 24 1 DESCRIPTION : OPERATION DESCRIPTION OF GT-8320C SHEETS NOTICE NO. DESIGNER CHECKER 28 K961/26/8903 Y. H. Ji J. H.
900MHz DSST PHONE with CALLER ID, SPK PHONE and ANSWERING SYSTEM. GT-8320C (900MHz DSST WITH CALLER ID , CALLWAITING ID, SPEAKER PHONE and ANSWERING SYSTEM) MANUAL This equipment has tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules, These limits are designed to provide reasonable protection against harmful interference in a residential installation.
900MHz DSST PHONE with CALLER ID, SPK PHONE and ANSWERING SYSTEM. GETTING TO KNOW YOUR NEW PHONE Your new GT-8320C telephone gives you the ultimate in cordless telephone sound quality with the luxury of Caller ID and Call Waiting ID If this is your first cordless telephone, you'11 soon discover that your cordless is similar to regular telephone, except without the cord.
900MHz DSST PHONE with CALLER ID, SPK PHONE and ANSWERING SYSTEM. LOCATING KEYS, LIGHT, AND S WITCHES ON THE B ASE Ne w • Progra •/ • Mem or Recor d Pag Mem Eras •• 1 2 4 5 O u •• 3 6 .Tim .Alar 7 8 9 .Rin Confir * Redial / P • Volume • Flas h SP K ① The PAGE key - is a homing system for finding the handset. If you press the PAGE key once, the handset beeps for 15seconds. ② IN USE light - becomes lit when the GT-8320C is being used.
900MHz DSST PHONE with CALLER ID, SPK PHONE and ANSWERING SYSTEM. ON THE HANDSET Keys TALK key-Turns the phone on or off so you can dial or talk. Voice mail key. Directly access your V.Mail service 12 : 22 PM 12 / 01 CALL 01 ✉ 1- 555 – 123 - 4567 SMITH JOHN Dialing keys-Control DEL " ! manual dialing.
900MHz DSST PHONE with CALLER ID, SPK PHONE and ANSWERING SYSTEM. HEADSET Jack Allows you to add a headset to the handset (not included, but available by order.
900MHz DSST PHONE with CALLER ID, SPK PHONE and ANSWERING SYSTEM. SETTING UP YOUR PHONE Now that you've checked the contents of the carton, it only takes a few steps to set up your phone. STEP 1. CHOOSE A CENTRAL LOCATION FOR THE BASE UNIT The base should be away from all other electronic equipment such as a personal computer, microwave, stereo ,or television. It is also a good idea to place the unit away from noisy areas, or from heat sources such as a radiator or direct sunlight. STEP 2.
900MHz DSST PHONE with CALLER ID, SPK PHONE and ANSWERING SYSTEM. 4. Turn the mounting bracket around so that the larger part the wedge is set the bottom of the phone 5. Use the same method to replace the bracket. 6. Insert the 8 inch line cord into phone jack marked TEL Line. 7. Thread the line cord through the channel on the right-hand side of the bracket to secure the cord. 8. Plug the adapter tip into the adapter jack. Be sure that the tip is all the way into the jack. 9.
00MHz DSST PHONE with CALLER ID, SPK PHONE and ANSWERING SYSTEM. 1. Press down on the battery cover and slide the battery cover down to expose the battery well. 2. Locate the battery connectors inside the battery well. If you are replacing a dead battery, remove the old battery by pulling firmly on the battery cords. 3. Insert the battery plug into the connector. It is polarized and only insert in one direction. 4. Place the battery in the battery well. 5. Replace the battery door. STEP 5.
900MHz DSST PHONE with CALLER ID, SPK PHONE and ANSWERING SYSTEM. When you make a selection, the check mark, “✓ ✓ ” moves to the selection you have made to use ▲ or ▼ key. After making a selection, the next programming screens appear. If you make a mistake, press ← (review) key to go back to the previous prompt or start the programming sequence again. When you do not want to go on programming sequence, press PGM to save the previous items and you will exit the programming mode.
900MHz DSST PHONE with CALLER ID, SPK PHONE and ANSWERING SYSTEM. STEP 10. SELECTING YOUR LANGUAGE You can choose between two different languages, English or Spanish. The screen SELECT LANGUAGE appears 1. Press → (REVIEW) key 2. Press ▲ or ▼ key to set SELECT LANGUAGE SELECT LANGUAGE ✓ ENG ESP FRE to ENG or ESP or FRE . STEP 11.
900MHz DSST PHONE with CALLER ID, SPK PHONE and ANSWERING SYSTEM. If you set AUTO ANSWER to ON, GT8110C automatically answer incoming calls when removed from the cradle and If set you also AUTO you could ANSWER to press OFF, press any key only to TALK connect key before after incoming answering STEP 14. SET RING ON or OFF If you don't need to hear the ring sound and select RING ON or OFF . 1. Press → (REVIEW) key RING ✓ ON OFF 3. Press ▲ or ▼ key to set RING to ON or OFF. STEP 15.
900MHz DSST PHONE with CALLER ID, SPK PHONE and ANSWERING SYSTEM. USING YOUR PHONE You can make calls many different ways with the GT8320C. DIALING (HAND SET) 1. Press TALK key on the handset. 2. Use the number pad to dial the phone number. The phone number appears on the display as you enter the number. You also hear beeps for each digit as you dial. 3. Listen for a connection. 4. Press TALK to end your call. DIALING (BASE SET) 1. Press SPK key on the baseset. 2.
900MHz DSST PHONE with CALLER ID, SPK PHONE and ANSWERING SYSTEM. 01 and it displays " NAME and NUMBER " in MEMEORY 4. Press TALK to dial 5556667777 The phone automatically dials out whatever is shown on the display. SMITH JOHN USING SPEED DIALING(B/S) 1. Press SPK key 2. Press MEMORY key. LED displays “ A- “. 3. Press a number key that is stored phone numbers. USING FLASH To access your custom calling services, like Call Waiting, while you are on the telephone, press FLASH key.
900MHz DSST PHONE with CALLER ID, SPK PHONE and ANSWERING SYSTEM. DIRECTORY ADRESS 01 NUMBER FIELD 555–5555 NAME FIELD SMITH JOHN a. Locate the character on the dialing keys 2 through 9. b. Press once to enter the first character, twice for the second character, etc. For example, to choose a P, press PQRS7 once, but to select an S, press PQRS7 four times. c. Use the Use the ← or → (REVIEW) Keys to move back and forth through the name. $ or % keys to move up and down. d.
900MHz DSST PHONE with CALLER ID, SPK PHONE and ANSWERING SYSTEM. 3. Press the address number key. 4. Press phome numbers 5. Press PROGRAM key. DELETING SPEED DIALING NUMBERS You can erase unwanted speed dial numbers one-at-a-time. IN HANDSET 05 1. Press MEMO key to see your speed dial list. 2. Use 18886665555 ← or → key to find the memory location you want. DELETE ? 3. Press DEL key once, and the GT-8320C asks if you want to delete this entry. 4. Press DEL key again to delete the speed dial number.
900MHz DSST PHONE with CALLER ID, SPK PHONE and ANSWERING SYSTEM. There are four user-selectable ringer tones available for this handset. 1. While in the Stand-by mode, press the FLASH button 2. Press a key (1 to 4) to select a ringer tone mode. USER SLECTABLE RINGER TONES(B/S) There are five user-selectable ringer tones available for this baseset. 1. While in the Stand-by mode, press the RING( 0 digit) button. 2. Press the RING button (continuously) to select a ringer tone mode.
900MHz DSST PHONE with CALLER ID, SPK PHONE and ANSWERING SYSTEM. TURING THE ANSWERING SYSTEM ON/OFF 1. To turn the answering system on, Press OUT DOOR. A tone sounds. Then, the OUT DOOR button is lighted. 2. To turn the answering system off, Press OUT DOOR again, Then, light turns off. SETTING THE CLOCK To set the correct time: 1. Press PROGRAM button. 2. Press TIME(7 digit) button 3. Press number key to input day. 1 : Sunday 2 : Monday 3 : Tuesday 4 : Wednesday 5 : Thursday 6 : Friday 7 : Saturday 4.
900MHz DSST PHONE with CALLER ID, SPK PHONE and ANSWERING SYSTEM. “Hello, I cannot receive your call, Please leave your message after a beep. Thank you.” Recording your personal Outgoing Message(OGM) 1. Press RECORD key in stand-by mode. The answering system announces explanation and LED counts recording time. Record your message. (MAX 20 sec) 3. When you finish recording your message, Press •/•(play/stop) button. A tone sounds. Your message plays back for your review.
900MHz DSST PHONE with CALLER ID, SPK PHONE and ANSWERING SYSTEM. 2. Press ••| at anytime to skip to the next message. 3. Press •/•(play/stop) at any time to stop reviewing your messages and return to stand-by mode. DELETING MESSAGES 1. Press •/•(play/stop) to review your messages. 2. If you decide to delete a message, press ERASE(2) button. The system goes to the next message. To delete all your messages, press ERASE button and press CONFIRM(#) button in stand-by mode.
900MHz DSST PHONE with CALLER ID, SPK PHONE and ANSWERING SYSTEM. One of the best features of your phone is Caller ID, which allows you to see information about an incoming call before you pick up the phone. With Caller ID service from your local telephone company, the GT-8320C telephone displays and records information about the call in a log. Possibly even better than Caller ID is Call Waiting ID.
900MHz DSST PHONE with CALLER ID, SPK PHONE and ANSWERING SYSTEM. 1. Press ← or → (REVIEW) to see how many new calls you have. ← or → (REVIEW) key to move though the Call Record list. 2. Use → (REVIEW) key to see the most recent call record. ☛ Press ← (REVIEW) key to see earlier calls. ☛ Press When you reach either end of the Call Record list, you see an 'END OF LIST' message. If you continue to press END OF LIST ← or → (REVIEW) key, you scroll through the list again.
900MHz DSST PHONE with CALLER ID, SPK PHONE and ANSWERING SYSTEM. many call records you have. 2. DEL Press key and the GT-8320C asks if you want to delete all Call Records. 3. DEL Press key again and the GT-8320C clears all Call Records, gives you a DELETEconfirmation A LL ? beep. SEEING LONG RECORDS If you receive long records on caller ID information, you could see that to use the ▲ or ▼ key. the ▲ or ▼ key allows you to scroll back and forth to see long records.
900MHz DSST PHONE with CALLER ID, SPK PHONE and ANSWERING SYSTEM. VOICE MAIL Voice Mail Service your calls when you are away from your phone or even while you are on the phone. The indicator Light flashes whenever you have message in your mailbox. And once you have programmed your Voice Mail key with your personal access codes, you can get your message at the touch of a button. You must subscribe to Voice Mail Service in order for this feature on your phone. To Program the Voice Mail Key.
900MHz DSST PHONE with CALLER ID, SPK PHONE and ANSWERING SYSTEM. The GT-8320C informs you of status by displaying the following messages : Message Display ALL CALLS & NEW CALLS: This message lets you know how many call records you have, and how many of those call records are new, In this example, you have 23 call records, ALL : 23 NEW : 03 and 3 new calls. CHARGING: The handset BATTERY is getting low. Place the handset in the base in order to recharge.
900MHz DSST PHONE with CALLER ID, SPK PHONE and ANSWERING SYSTEM. NUMBER ONLY: Either name service is not available in your area, or you are subscribing to a number-only service. PRIVATE: The caller has purposely chosen to block his/her phone number. 10 : 35 PM 10 / 25 CALL 25 555–5555 10 : 35 PM 10 / 25 CALL 25 PRIVATE TALK: The handset is on and ready for you to dial. TALK PAGING : The Base is calling the handset.
900MHz DSST PHONE with CALLER ID, SPK PHONE and ANSWERING SYSTEM. OUT OF RANGE: If you use the handset too far away from the base unit during a call, the handset will alert youOUT by OF audio RANGE warning (when using talk) and OUT OF RANGE appears on the display. NUMBER STORED : When you save the call records in the directory or create a speed dialing list, you will see the display like this. Forwarded CALLS : The message sent is a forwarded calls.
900MHz DSST PHONE with CALLER ID, SPK PHONE and ANSWERING SYSTEM. Are you having trouble with your phone? Here are some of the most common problem areas and solutions. SYMPTOM CORRECTIVE ACTION No dial tone ☛ Verify that the line cord is connected and secure. ☛ Check to see that you are not out of range to the base. ☛ Check that the AC adapter is plugged into the outlet. ☛ Check that the handset is fully charged. ☛ Check to see that the Battery is connected inside the battery compartment.
900MHz DSST PHONE with CALLER ID, SPK PHONE and ANSWERING SYSTEM. ☛ Check your service. Call your local phone company to ensure that you have NO DATA Caller ID or Call Waiting ID service. ☛ Check the answering machine. Ensure that your answering machine is set to answer after two rings. ☛ You answered the call before two rings. ☛ Check call Forwarding. Ensure that Call Forwarding is turned off. ☛ Contact your local phone company’s Service Department If the problem continues for more than 24 hours.
