LG Information & Communications 99-12-10 LG-DM112/114 Operating Manual 1/2626/
FCC RF EXPOSURE INFORMATION WARNING! Read this information before using your phone In August 1996 the Federal Communications Commission (FCC) of the United States with its action in Report and Order FCC 96-326 adopted an updated safety standard for human exposure to radio frequency (RF) electromagnetic energy emitted by FCC regulated transmitters. Those guidelines are consistent with the safety standard previously set by both U.S. and international standards bodies.
LG Information & Communications 99-12-10 CHAPTER 1.
LG Information & Communications 99-12-10 CHAPTER 2. BASIC FUNCTIONS Turning the Phone On and Off 1. Connect the terminal to the charged battery or the external power supply. 2. Press the [END/PWR] key for about 1.5 seconds until a red right appears on the upper side of the terminal. < Turning the Terminal Off > 1. Press the [END/PWR] key until the end message appears on the LCD, and then stop pressing the key. 2. If an antenna is stretched, push it in for safety.
LG Information & Communications 99-12-10 2. If you are not sure of the phone entry number, select the Soft Key (BOOK) on the right side. 3. Place the cursor on the Phone Book, and press the Soft Key (SEL) on the left side. 4. Search the Phone Book Entry number or name requested in the Phone Book to attempt a call to the phone number stored in it. Using the Recent Call History 1. Select the Soft Key (BOOK) on the right side. 2. If the screen changes, place the cursor on the Call History.
LG Information & Communications 99-12-10 Receiving Calls 1. Press any key except for the [END/PWR] key to receive a call. HPress the END Key once to stop the bell or vibration. HH Press the END Key twice to end the incoming call 2. When the call completes, press the [END/PWR] key. 3. Or close the flip. Mute 1. Press the Soft Key (MENU) on the left side during the call. 2.
LG Information & Communications 99-12-10 4. Place the cursor on the menu requested, and press the Soft Key (SEL) on the left side. e.g.) Place the cursor on the “Outgoing Calls” menu and press the Soft Key (SEL) on the left side. 5. The phone number list will appear. Place the cursor on the phone number or name requested, and press the [SND] key. Then, the call will be attempted.
LG Information & Communications 99-12-10 CHAPTER 3. PHONE BOOK FEATURES Two types of Phone Books This service enables easier use of the outgoing or incoming phone numbers because it is possible to store up to 200 phone numbers in the memory.
LG Information & Communications 99-12-10 in turn. If you set the Secret function to the memory address, you will be unable to see the phone number or to correct it. Entering Characters You will be provided with 5types of modes (English Lower, English Upper, Digil, Special Char, Icon) to enter the characters. Use the upside (é) key to change among the modes while entering the characters. The present mode is indicated on the lower center of the screen.
LG Information & Communications 99-12-10 7. Enter a special code or icon in the “SPEC” or “ICON” mode. An icon set is indicated in the order of 12 keypads on the right side of the screen in a “SPEC (ICON)” mode. Press the key corresponding to the symbol (icon) to be entered in reference of them, and then the symbol (icon) will be entered on the space where the cursor is placed.
LG Information & Communications 99-12-10 1. Enter the Phone Entry number (up to three digits) to be retrieved in an initial state. 2. Press the Soft Key (OPT) on the left side, and then a popup menu will appear. 3. Place the cursor on the “Entry” item on the popup menu and press the Soft Key (SEL) on the left side. And then, the information stored in the input entry number will appear. Press the [SND] key to attempt a call to that number. 4.
LG Information & Communications 99-12-10 Dialing Numbers from Your Phone Book This function enables fast dialing with the entry number stored with the phone number requested. One-Touch Dialing enables the call with the touch of just one key by its function to store the phone numbers requested in the Phone Book. This service is available only for the phone number stored in the entry numbers 01~09. 1. Press the Phone Book Entry number for 2.
LG Information & Communications 99-12-10 1. Press the Soft Key (BOOK) on the right side. 2. Select the “Phone Book” menu. 3. Select the “Find Entry” item. 4. Use the upside and downside key instead of the Entry number, and then the contents of the Phone Book Memory will appear in the order of the Entry numbers. 5. Place the cursor on the number requested, and press the [SND] key. 1. Press the Soft Key (BOOK) on the right side of the screen. 2.
LG Information & Communications 99-12-10 3. Select the [Hard Pause] item on the popup menu, and then a character “P” will be indicated on the screen. 4. Select the [Time Pause] item, and then the 2 Sec Pause will be indicated as the character “T”. [Hard Pause] [Time Pause] **Note – Press the items in the orders of the Soft Key (MENU) on the left, the [Auto Hyphen] and [ON] items on the screen in a call waiting state to select the Auto Hyphen function.
LG Information & Communications 99-12-10 2. Select the [Prepend] item on the popup menu. Then, the cursor will be placed at the beginning of the phone number. 3. Enter the numbers to be added, and press the Soft Key (Call) on the left or [SND] key to attempt a call.
LG Information & Communications 99-12-10 CHAPTER 4. MENU FEATURE Main Menu It is possible to verify or change various functions or setup the terminal status on the main menu. General Guidelines to MENU Access and Settings 1. Press the Soft Key (MENU) on the left and the menu items will appear. 2. Use the upside and downside keys (é ê) to move to the menu items not indicated on the screen. 3.
LG Information & Communications 99-12-10 2. Ringer Type ( F [MENU]-1-2 ) Set one of three ringer types (Ring, Vibrator, and LED) with the direction keys. 3. Ring Volume & Vibrator ( F [MENU]-1-3 ) - Ring type: Adjust the ring volume in seven levels (High - Medium – Low - Off - Vib1 - Vib2 - Viv3) with the direction keys. The ring volume is also adjustable with the side keys while the bell is ringing or in a call waiting state. - Vibrator type: Adjust the vibrator volume in four levels.
LG Information & Communications 99-12-10 Adjust the earpiece volume in three levels (High > Medium > Low) with the direction keys. It is also adjustable with the side keys in a busy line state. 7. Alert ( F [MENU]-1-7 ) An alert signal is activated according to each situation by five submenus under the Alert menus. - Service Change: This signal notifies whether a call is available or not between the service and the no service areas.
LG Information & Communications 99-12-10 - Default - Srar Theme - Theme3 - Theme4 Select one of the above items. 4. Auto Hyphen (F [MENU]-2-4 ) It is possible to set the function to enter the Hyphen to the input number automatically to an “On” or “Off” state. . 5. Languages ( F [MENU]-2-5 ) It is possible to set the language to be used in the terminal among four languages with the direction keys (Select one of four languages of English, French, Spanish, and Portuguese) Menu 3. 1.
LG Information & Communications 99-12-10 2. Auto NAM ( F [MENU]-3-2 ) This service enables setting of the NAM to the identified subscribed number for one or more than one NAMs. Use the direction keys to set the service to either “On” or “Off” state. 3. Force Mode ( F [MENU]-3-3 ) In the Force Mode, the Selections move to the Prefer Mode on the Hidden Menu. 4. Sys select ( F [MENU]-3-4 ) Select either “On” or “Off” with the direction keys. It is possible to select the cellular company with this function.
LG Information & Communications 99-12-10 2. Home Call (F [MENU]-4-2 ) - Total call time at the Home system (not roaming) from initial setup to the present. 3. Roam Call ( F [MENU]-4-3 ) Shows the call time at the roaming system from initial setup to the present 4. All Calls ( F [MENU]-4-4 ) It shows the total call time to the present either at the Home system or the roaming system or both. Menu 5. 1.
LG Information & Communications 99-12-10 3. PC-Syn ( F [MENU]-5-4 ) 6. Data/Fax In (F [MENU]-5-1) This service enables selection of the data communication type in either the modem termination type or the FAX termination type. Select one of the “Off”, “Data In”, and “FAX In” services, and select the Soft Key (SEL) on the left. - Data In: If you want to receive data from the originating user in peer-to-peer communication, select this service.
LG Information & Communications 99-12-10 menu. And if the Lock Code is not correct, the process will return to the Main Menu. 1. Lock Phone ( F [MENU]-7-1 ) Set the terminal lock function to either “Off” or “Lock Now” with the direction key. 2. Restriction ( F [MENU]-7-3 ) This service enables restriction on the call service. Select either “Off” or “Outgoing” with the direction key.
LG Information & Communications 99-12-10 CHAPTER 6. Massage Massage Service This service supports reception of the text message, alerting, and the voice mailbox. It is possible to access the above functions with the text message key ( . ). Call back service is also available with the call key ([SND] key) , if the calling number is indicated on the message received. It is possible to store up to 23 messages and to receive up to 120 characters per message.
LG Information & Communications 99-12-10 Select the OPT, and the sub menu related to the message will appear. - [Next]: It indicates that there is another message received. (If no more new message has been received, the old text list will be indicated.) - [Erase]: It erases the message. - [Call back]: It calls back to the calling number. 2. Old Text (*) - - It indicates the checked but not erased messages in the form of the list.
LG Information & Communications 99-12-10 3. Voice (*) - It indicates the number of the voice messages in the voice mailbox. - Press the voice mailbox identification number or the [Call] menu key. Then, the voice mailbox will connect. - Select the [Erase] menu item. Then, the messages will be erased, as many as indicated on the LCD, without need to verify the number of messages 4. Erase All - This service enables erasing of all the messages stored by the message service. 5.
LG Information & Communications 99-12-10 - Selecting the setting menu ALERT SELECT 2 MIN ALERT ALERT 2 alerts OK Off OK NEXT - Selecting the Alert menu NEXT Selecting the2 Min Alert menu 26/2626/