ENGLISH OWNER’S MANUAL Network Blu-ray Disc™/ DVD Player Please read this manual carefully before operating your set and retain it for future reference. MODEL BD560 BD561-P-BUKRLLK-ENG.indd 1 2010.2.
BD561-P-BUKRLLK-ENG.indd 2 2010.2.
Safety Information 1 Safety Information 1 Safety Information CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USERSERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Safety Information This device is equipped with a portable battery or accumulator. 1 Safety Information Safety way to remove the battery or the battery from the equipment: Remove the old battery or battery pack, follow the steps in reverse order than the assembly. To prevent contamination of the environment and bring on possible threat to human and animal health, the old battery or the battery put it in the appropriate container at designated collection points.
Safety Information Important Notice for TV colour system • Because AACS (Advanced Access Content System) is approved as content protection system for BD format, similar to use of CSS (Content Scramble System) for DVD format, certain restrictions are imposed on playback, analog signal output, etc., of AACS protected contents.
Contents 3 Installation 14 14 1 Safety Information 3 Cautions and Warnings Connecting to Your TV HDMI Connection 15 What is SIMPLINK? 16 Component Video Connection 16 Video/Audio (Left/Right) Connection 17 Resolution Setting 2 18 Preparation 18 Connecting to an Amplifier via HDMI Output 8 Introduction Connecting to an Amplifier 19 About the “ ” Symbol Display Connecting to an Amplifier via Digital Audio Output 19 8 Symbols Used in this Manual Connecting to an Amplifier via 2 Channe
4 7 Operation Appendix 31 General Playback 61 33 Advanced Playback Controlling a TV with the Supplied Remote Control 37 On-Screen display 62 Network Software Update 40 Enjoying BD-LIVE 64 Area Code List Playing a movie file and VR disc 65 Language code List Viewing a photo 66 Trademarks and Licenses 68 Audio Output Specifications 70 Video Output Resolution 41 42 44 45 Listening to music during a slide show 2 71 Specifications 45 Audio CD Recording 72 47 Viewing informati
Preparation 2 Preparation 2 Introduction Preparation MUSIC Music files contained in the USB/Disc PHOTO Photo files About the “ ” Symbol Display “ ” may appear on your TV display during operation and indicates that the function explained in this owner’s manual is not available on that specific media. Symbols Used in this Manual Supplied Accesorries Video cable (1) Audio cables (1) Remote control (1) Batteries (2) NOTE Indicates special notes and operating features.
Preparation Playable Discs Blu-ray Disc - Discs such as movies that can be purchased or rented. - BD-R/RE discs that contain Movie, Music or Photo files. DVD-VIDEO (8 cm / 12 cm disc) Discs such as movies that can be purchased or rented. DVD-RW (8 cm / 12 cm disc) - VR mode, Video mode and finalized only - Finalized AVCHD format - DVD-RW discs that contain Movie, Music or Photo files.
Preparation File compatibility NOTE Overall • HD movie files contained on the CD or USB 1.0/1.1 may not played properly. BD, DVD or USB 2.0 are recommended to play back HD movie files. Available File extensions: “.jpg”, “.jpeg”, “.png”, “ .avi”, “.divx”, “.mpg”, “.mpeg”, “.mkv”, “.mp4”, “.mp3”, “.wma”, “.wav” 2 • Some wav files are not supported on this player. • The file name is limited to 180 characters. • This player support H.264/MPEG-4 AVC profile Main, High at Level 4.1.
Preparation Regional Code This unit has a regional code printed on the rear of the unit. This unit can play only BD-ROM or DVD discs labeled same as the rear of the unit or “ALL”. AVCHD (Advanced Video Codec High Definition) This player can playback AVCHD format discs. These discs are normally recorded and used in camcorders. • The AVCHD format is a high definition digital video camera format. • The MPEG-4 AVC/H.
Preparation Remote control • • • • • • a• • • • • • 1 (POWER): Switches the player ON or OFF. Z (OPEN/CLOSE): Opens and 2 closes the disc tray. Preparation 0-9 numerical buttons: Selects numbered options in a menu or inputs letters in the keypad menu. CLEAR: Removes a mark on the search menu or a number when setting the password. REPEAT: Repeats a desired section or sequence. • • • • • • b• • • • • • m/M (SCAN): Searches backward or forward. .
Preparation 13 Front panel 2 f N/X (PLAY / PAUSE) b Z (OPEN/CLOSE) g x (STOP) c 1 (POWER) Button h ./> (SKIP) d Display Window i USB Port Preparation a Disc Tray e Remote Sensor Rear panel a AC power cord e LAN port b DIGITAL AUDIO OUT (COAXIAL) f HDMI OUT (Type A, Version 1.3) c VIDEO OUT g COMPONENT VIDEO OUT (Y PB PR) d 2CH AUDIO OUT (Left/Right) BD561-P-BUKRLLK-ENG.indd 13 2010.2.
Installation 3 Installation Connecting to Your TV 3 Installation Make one of the following connections, depending on the capabilities of your existing equipment. • HDMI connection (page 14-15) • Component Video connection (page 16) • Video/Audio (Left/Right) Connection (page 16) HDMI Connection If you have a HDMI TV or monitor, you can connect it to this player using a HDMI cable (Type A, Version 1.3). Connect the HDMI jack on the player to the HDMI jack on a HDMI compatible TV or monitor.
Installation NOTE • If a connected HDMI device does not accept the audio output of the player, the HDMI device ’s audio sound may be distorted or may not output. • When you use HDMI connection, you can change the resolution for the HDMI output. (Refer to “Resolution Setting” on page 17.) • Select the type of video output from the HDMI OUT jack using [HDMI Color Setting] option on the [Setup] menu (see page 26). • When the HDMI connection with HDCP is not verified, TV screen is changed to black screen.
Installation Component Video Connection Connect the COMPONENT VIDEO OUT jacks on the player to the corresponding input jacks on the TV using component video cable. Connect the left and right AUDIO OUT jacks of the player to the audio left and right IN jacks on the TV using the audio cables. Component Connection Video/Audio (Left/Right) Connection Connect the VIDEO OUT jack on the player to the video in jack on the TV using a video cable.
Installation Resolution Setting The player provides several output resolutions for HDMI OUT and COMPONENT VIDEO OUT jacks. You can change the resolution using [Setup] menu. 1. Press HOME ( ). 2. Use I/i to select the [Setup] and press ENTER ( ). The [Setup] menu appears. 17 NOTE • If your TV does not accept the resolution you have set on the player, you can set resolution to 576p as follows: 1. Press Z to open the disc tray. 2 Press x (STOP) for more than 5 seconds.
Installation Connecting to an Amplifier Make one of the following connections, depending on the capabilities of your existing equipment. 3 • HDMI Audio connection (page 18) • Digital Audio connection (page 19) • 2CH Analog Audio connection (page 19) Connecting to an Amplifier via HDMI Output Connect the player’s HDMI OUT jack to the corresponding in jack on your amplifier using a HDMI cable. You will need to activate the player’s digital output. (See “[AUDIO] Menu” on pages 27-28.
Installation Connecting to an Amplifier via Digital Audio Output Connecting to an Amplifier via 2 Channel Audio Output Connect the player’s DIGITAL AUDIO OUT jack to the corresponding in jack (COAXIAL) on your amplifier. Use an optional digital audio cable. You will need to activate the player’s digital output. (See “[AUDIO] Menu” on pages 27-28.
Installation Connecting to your Home Network Wired Network Connection Router/Modem This player can be connected to a local area network (LAN) via the LAN port on the rear panel. By connecting the unit to a broadband home network, you have access to services such as software updates, BD-LIVE interactivity and on-line services.
Installation Wired Network Setup If there is a DHCP server on the local area network (LAN) via wired connection, this player will automatically be allocated an IP address. After making the physical connection, a small number of home networks may require the player’s network setting to be adjusted. Adjust the [NETWORK] setting as follow.
Installation Notes on Network Connection: • 3 Many network connection problems during set up can often be fixed by re-setting the router or modem. After connecting the player to the home network, quickly power off and/or disconnect the power cable of the home network router or cable modem. Then power on and/or connect the power cable again. Depending on the internet service provider (ISP), the number of devices that can receive internet service may be limited by the applicable terms of service.
Installation USB device connection 23 3. Select [Movie], [Photo] or [Music] using I/i, and press ENTER ( ). This player can play movie, music and photo files contained in the USB device. Playback content in the USB device 4. Select the [USB] option using I/i, and press ENTER ( ). 1. Insert a USB device to the USB port until it fits into place. 3 Installation USB device connection 5. Select a file using U/u/I/i, and press PLAY or ENTER ( ) to play the file.
Installation NOTE • This player supports USB flash memory/external HDD formatted in FAT16, FAT32 and NTFS when accessing files (music, photo, movie). However, for BD-LIVE and Audio CD recording, only FAT16 and FAT32 formats are supported. Use the USB flash memory/external HDD formatted in either FAT16 or FAT32 when using BD-LIVE and Audio CD recording. Settings Adjust the Setup Settings You can change the settings of the player in the [Setup] menu. 1. Press HOME ( ).
Installation 4. Use U/u to select a second setup option, and press ENTER ( ) to move to the third level. 25 NOTE You cannot select [4:3 Letter Box] and [4:3 Pan Scan] option when the resolution is set to higher than 720p. Resolution Sets the output resolution of the Component and HDMI video signal. Refer to page 17 and 70 for details about the resolution setting. 5. Use U/u to select a desired setting, and press ENTER ( ) to confirm your selection.
Installation 1080p Display Mode When the resolution is set to 1080p, select [24Hz] for smooth presentation of film material (1080p/24 Hz) with a HDMI-equipped display compatible with 1080p/24 Hz input. [LANGUAGE] Menu Display Menu Select a language for the [Setup] menu and on-screen display. NOTE • When you select [24 Hz], you may experience some picture disturbance when the video switches video and film material. In this case, select [50 Hz].
Installation [AUDIO] Menu Each disc has a variety of audio output options. Set the player’s Audio options according to the type of audio system you use. NOTE Since many factors affect the type of audio output, see “Audio Output Specifications” on page 68-69 for details. HDMI / Digital Output [PCM Stereo] Select if you connect this unit’s HDMI OUT or DIGITAL AUDIO OUT jack to a device with two-channel digital stereo decoder.
Installation DRC (Dynamic Range Control) If you forget your password When a title encoded in Dolby Digital or Dolby Digital Plus is playing back, you may wish to compress the dynamic range of the audio output (the difference between the loudest sounds and the quietest ones). This allows you to listen to a movie at a lower volume without losing clarity of sound. Set [DRC] to [On] for this effect. If you forget your password, you can clear it using the following steps: 1.
Installation NOTE The [BD rating] will be applied only for the BD disc that containing the Advanced Rating Control. 29 [NETWORK] Menu The [NETWORK] settings are needed to use the software update, BD Live and on-line features. Area Code Connection Setting Enter the code of the area whose standards were used to rate the DVD video disc, based on the list on page 64. If your home network environment is ready to connect to the player, the player needs to be set up for network communication.
Installation [OTHERS] Menu DivX VOD ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, Inc. This is an official DivX Certified device that plays DivX video. Visit www.divx.com for more information and software tools to convert your files into DivX video. 3 Installation ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play DivX Video-on-Demand (VOD) content. To generate the registration code, locate the DivX VOD section in the device setup menu.
Operation 31 4 Operation General Playback 4. Select [Movie], [Photo] or [Music] using I/i, and press ENTER ( ). 5. Select the [Disc] option using I/i, and press ENTER ( ). Playing Discs 1. Press Z (OPEN/CLOSE), and place a disc on the disc tray. Insert a disc 4 Operation This step is needed only when a disc and a USB device are connected simultaneously in this unit. 6. Select a file using U/u/I/i, and press B (PLAY) or ENTER ( ) to play the file. NOTE 2. Press Z (OPEN/CLOSE) to close the disc tray.
Operation To stop playback Press x (STOP) during playback. Using the disc menu BD DVD AVCHD To pause playback To display the disc menu Press X (PAUSE) during playback. Press B (PLAY) to resume playback. The menu screen may be displayed first after loading a disc which contains a menu. If you want to display the disc menu during playback, press DISC MENU. To play frame-by-frame Press X (PAUSE) while movie playback. Press X (PAUSE) repeatedly to play Frame-byFrame playback.
Operation Resume playback BD MUSIC DVD AVCHD MOVIE ACD The unit records the point where you pressed the x (STOP) depending on the disc. If “Xx (Resume Stop)” appears on the screen briefly, press B (PLAY) to resume playback (from the scene point). If you press x (STOP) twice or unload the disc, “x (Complete Stop)” appears on the screen. The unit will clear the stopped point. NOTE • The resume point may be cleared when a button is pressed (for example; 1 (POWER), Z (OPEN/CLOSE), etc).
Operation Enlarge the playback image NOTE BD • If you press > once during Repeat Chapter/ Track playback, the repeat playback cancels. DVD AVCHD MOVIE PHOTO 1. During playback or pause mode, press ZOOM to display the [Zoom] menu. • This function may not work on some disc or title. Repeating a specific portion BD DVD AVCHD ACD This player can repeat a portion you have selected. 1. During playback, press REPEAT to select [A-] at the beginning of the portion you wish to repeat. 4 2.
Operation To delete a Marker 1. Press SEARCH and the search menu appears on the screen. 2. Press u to highlight a marker number. Use I/i to select a marked scene that you want to delete. 3. Press CLEAR and the marked scene is erased from the search menu. 35 To start playback from a marked scene 1. Press SEARCH and the search menu appears on the screen. 2. Press u to highlight a marker number. Use I/i to select a marked scene that you want to playback. 3.
Operation Changing content list view Viewing content information MOVIE MUSIC PHOTO MOVIE On the [Movie], [Music] or [Photo] menu, you can change the content list view. The player can display the content information. Method 1 2. Press INFO/DISPLAY ( ) to display the option menu. Press red (R) coloured button repeatedly. 1. Select a file using U/u/I/i. 3. Select the [Information] option using U/u, and press ENTER ( ). The file information appears on the screen.
Operation On-Screen display You can display and adjust various information and settings about the content. Displaying content information on-screen BD DVD 37 i Movie Information – Select this option and press ENTER ( ) to display movie information from Gracenote Media Database (BD/DVD only). 2. Select an option using U/u. 3. Use I/i to adjust the selected option value. 4. Press RETURN (O) to exit the On-Screen display. AVCHD MOVIE 1.
Operation Playing from selected time BD DVD NOTE AVCHD MOVIE 1. Press INFO/DISPLAY ( ) during playback. The time search box shows the elapsed playing time. 2. Select the [Time] option and then input the required start time in hours, minutes, and seconds from left to right. For example, to find a scene at 2 hours, 10 minutes, and 20 seconds, enter “21020”. Press I/i to skip the playback 60 seconds forward or backward. 3. Press ENTER ( ) to start playback from selected time.
Operation Watching from a different angle BD DVD Changing the Picture Mode If the disc contains scenes recorded at different camera angles, you can change to a different camera angle during playback. You can change the [Picture mode] option during playback. 1. During playback, press INFO/DISPLAY ( ) to display the On-Screen display. BD DVD AVCHD MOVIE 1. During playback, press INFO/DISPLAY ( ) to display the On-Screen display. 2. Use U/u to select the [Angle] option. 2.
Operation Enjoying BD-LIVE This unit allows you to enjoy functions such as picture-in-picture, secondary audio and Virtual packages, etc., with BD-Video supporting BONUSVIEW (BD-ROM version 2 Profile 1 version 1.1/ Final Standard Profile). Secondary video and audio can be played from a disc compatible with the picture-in-picture function. For the playback method, refer to the instructions in the disc.
Operation Playing a movie file and VR disc 41 NOTE • The file requirements are described on page 10. • You can use various playback functions. Refer to pages 31-39. You can play DVD-RW discs that are recorded in Video Recording (VR) format and movie files contained in a disc/USB device. 1. Press HOME ( ). • Unfinalized DVD VR format discs may not be played in this player. • Some DVD-VR discs are made with CPRM data by DVD RECORDER. This unit cannot support these kinds of discs.
Operation NOTE Viewing a photo If you press x (STOP) during playback, the subtitle selection is cancelled. You can view photo files using this player. 1. Press HOME ( ). Changing subtitle code page MOVIE If the subtitle is not displayed properly, you can change the subtitle code page to view the subtitle file properly. 1. During playback, press INFO/DISPLAY ( ) to display the On-Screen display. 2. Use U/u to select the [Code Page] option. 3. Use I/i to select desired code option. 2.
Operation To play a slide show Press B (PLAY) to start slide show. a Current photo/Total number of photos – Use I/i to view previous/next photo. To stop a slide show b Slide Show – Press ENTER ( ) to start or pause slide show. Press x (STOP) during slide show. c Music Select – Select the background music for the slide show (page 44). To pause a slide show d Music –Press ENTER ( ) to start or pause background music. Press X (PAUSE) during slide show. Press B (PLAY) to re-start the slide show.
Operation Listening to music during a slide show 8. Use U/u to select a file or a folder you wish to play. You can display photo files while listening to music files. 1. Press HOME ( ). Select a folder and press ENTER ( ) to display the lower directory. Select and press ENTER ( ) to display the upper directory. 2. Select [Photo] using I/i, and press ENTER ( ). 9. Use i to select [OK], and press ENTER ( ) to complete music selection. 3.
Operation Listening to music 45 NOTE • The file requirements are described on page 10. The player can play Audio CDs and music files. 1. Press HOME ( • You can use various playback functions. Refer to pages 31-39. ). Audio CD Recording You can record one desired track or all of the tracks from an Audio CD to a USB storage device. 2. Select [Music] using I/i, and press ENTER ( ). 3. Select the [Disc] or [USB] option using I/i, and press ENTER ( ). 1.
Operation 6. Use U/u/I/i to select [Start], and press ENTER ( ). 7. Use U/u/I/i to select a destination folder to be copied. NOTE • The table below shows the average recording time from an audio track with 4 minutes of playback time to a music file with 192kbps as an example. stop mode during playback 1.4 min. 2 min. • All times in the above table are approximate. If you want to create a new folder, use U/u/I/i to select [New Folder] and press ENTER ( ).
Operation Viewing information from Gracenote Media Database The player can access to the Gracenote Media Database and loads the music information so that Track name, Artist Name, Genre and other text information can be displayed on the list. Audio CD When you insert an Audio CD, the player starts playback automatically and load the music title from the Gracenote Media Database. If there is no music information in the database, music titles will not be displayed on the screen. Music file 1.
Operation Using the NetCast™ Entertainment Access Playing YouTube™ videos You can use various content services via Internet with the NetCast Entertainment Access feature. Watch YouTube™ videos on your TV 1. Check the network connection and settings (pages 20-22). 2. Press HOME ( ). 3. Select the [NetCast] using I/i, and press ENTER ( ). 4. Select an option using I/i, and press ENTER ( ). You can browse, search and watch YouTube™ videos over the internet on your TV via your LG BD player. 1.
Operation 49 About the YouTube™ menu There are various options on the YouTube™ menu. Use U/u/I/i to select an option and press ENTER ( ) to select the options as described below. Featured – The featured videos list will be displayed. Recent Videos – The most recently updated videos list will be displayed. Most Viewed – The most viewed videos list will be displayed. The period option appears at the bottom of the screen. Top Rated – The best rated videos list from YouTube™ server will be displayed.
Operation Using the virtual keyboard Keypad Mode On the virtual keyboard, there are two input modes for the entering a character. Press the yellow (Y) coloured button to toggle the display between keyboard mode and keypad mode. This mode allows you to enter letters by pressing the buttons on the remote control. Press the buttons with the required letter once, twice, three or four times until the letter is displayed.
Operation You can search for videos by entering search words of up to 128 characters. 3. When you finish entering the username and the password, select [OK] and press ENTER ( ) to sign in. 1. Use I/i to select [Search] option from the menu and press ENTER ( ) to display the virtual keyboard. 4. If you want to sign out, select the [Sign Out] from the YouTube™ menu and press ENTER ( ). Refer to “Using the virtual keyboard” on page 50 for using the virtual keyboard.
Operation Viewing Picasa™ Web Albums Options while viewing a photo You can use various options during viewing a photo in full screen. Enjoy photo albums from friends and family on the Picasa™ on-line service. View Picasa™ Web Albums on your TV 1. On the player, select the [Picasa™ Web Albums] option in the [NetCast] menu using I/i, and press ENTER ( ). Featured photos are displayed on the screen. 2. Use U/u/I/i to select a photo and press ENTER ( ) to view the photo in full screen.
Operation About the Picasa™ menu Adding friends There are various options on the Picasa™ menu. Use U/u/I/i to select an menu option and press ENTER ( ) to select the options as described below. If you add your friends on the [NetCast Friends] menu, you can see the photos of your friend’s public photos directly. Home – The featured photo list will be displayed. NetCast Friends – List of your friends will be displayed. My Photos – Displays the photos organized in my Picasa™ Web Albums.
Operation Searching photos You can enter a search word to find related photos. 1. Select the [Search] on the Picasa™ menu using U/u/I/i, and press ENTER ( ). 2. Enter a search word using the virtual keyboard. Refer to “Using the virtual keyboard” on page 50 for using virtual keyboard. 3. Select [OK] using U/u/I/i, and press ENTER ( ) to display the search result. NOTE The search result from the player may differ from the result when searched from a web browser on PC. 3.
Operation Using the AccuWeather 55 6. Use U/u/I/i to select [Home] and press ENTER ( ) to display weather information of the selected city. See on-line local and global weather forecasts from AccuWeather.com. Viewing weather information 1. On the player, select the [AccuWeather] option in the [NetCast] menu using I/i, and press ENTER ( ). The city selection menu appears on the screen. Press red (R) coloured button to toggle display between Fahrenheit or Celsius thermometer. 7.
Operation Adding more cities 1. Use I/i to select [Favorite City List] on the AccuWeather menu, and press ENTER ( ). 2. Press ENTER ( ) while [Add City to Favorite City List] is selected. 3. Select a region, country and city using U/u/I/i and ENTER ( ). 4. Repeats step 2-3 to add up to 5 cities. 4 Operation Select the [X] symbol and press ENTER ( ) to delete the stored favorite city. 5. Use U/u to select a city form the [Favorite City List], and press ENTER ( ) to display the weather information.
Maintenance 57 5 Maintenance Handling the Unit Handling Discs When shipping the unit Do not touch the playback side of the disc. Hold the disc by the edges so that fingerprints do not get on the surface. Never stick paper or tape on the disc. Please save the original shipping carton and packing materials. If you need to ship the unit, for maximum protection, re-pack the unit as it was originally packed at the factory.
Troubleshooting 6 Troubleshooting General Symptom Cause & Solution The Power does not turn on. • Plug the power cord into the wall outlet securely. The unit does not start playback. • Insert a playable disc. (Check the disc type, colour system, and regional code.) • Place the disc with the playback side down. • Place the disc on the disc tray correctly inside the guide. • Clean the disc. • Cancel the Rating function or change the rating level. The angle cannot be changed.
Troubleshooting 59 Picture Symptom Cause & Solution There is no picture. • Select the appropriate video input mode on the TV so the picture from the unit appears on the TV screen. • Connect the video connection securely. • Check the [HDMI Colour Setting] in the [Setup] menu is set to the appropriate item that conforms to your video connection. • Your TV may not support the resolution you have set on the player. Change the resolution that your TV accepts.
Troubleshooting Network Symptom Cause & Solution BD-LIVE feature does not work. • The connected USB storage may not have enough space. Connect the USB storage with at least 1GB free space. • Ensure that the unit is correctly connected to the local area network and can access the internet (see pages 20-22). • Your broadband speed may not be fast enough to use the BD-LIVE features. Contact your Internet Service Provider (ISP) and increase the broadband speed is recommended.
Appendix 61 7 Appendix Controlling a TV with the Supplied Remote Control You can control your TV using the buttons below. Setting up the remote to control your TV You can operate your TV with the supplied remote control. If your TV is listed in the table below, set the appropriate manufacturer code. 1. While holding down 1 (TV POWER) button, and press the manufacturer code for your TV with the numerical buttons (see the table below).
Appendix Network Software Update Network update notification From time to time, performance improvements and/or additional features or services may be made available to units that are connected to a broadband home network. If there is new software available and the unit is connected to a broadband home network, the player will inform you about the update as follows. Option 1: 1. The update menu will appear on the screen when you turn on the player. 2.
Appendix 3. Select [Update] option, and press ENTER ( ). 63 8. Select [OK] to start updating. (Selecting [Cancel] will end the update and downloaded file will not be re-usable. To update software the next time, the software update procedure has to be started from the beginning again.) CAUTION The player will check for the newest update. NOTE • Pressing ENTER while checking for the update will end the process. • If there is no update available, the Message, “No update is found.” appears.
Appendix Area Code List Choose an area code from this list.
Appendix 65 Language code List Use this list to input your desired language for the following initial settings: [Disc Audio], [Disc Subtitle] and [Disc Menu].
Appendix Trademarks and Licenses “Blu-ray Disc” is a trademark. “AVCHD” and the “AVCHD” logo are trademarks of Panasonic Corporation and Sony Corporation.
Appendix 67 knowing anything about who you are. For more information, see the web page for the Gracenote Privacy Policy for the Gracenote service. Gracenote®, Gracenote logo and logotype, and the “Powered by Gracenote” logo are either registered trademarks or trademarks of Gracenote, Inc. in the United States and/or other countries. Music recognition technology and related data are provided by Gracenote®.
Appendix Audio Output Specifications Jack/Setting Source Dolby Digital Dolby Digital Plus Dolby TrueHD DTS DTS-HD Linear PCM 2ch Linear PCM 5.1ch Linear PCM 7.
Appendix *5 If the [HDMI] or [Digital Output] option is set to [DTS re-encode], the audio output is limited to 48 kHz and 5.1Ch. If the [HDMI] or [Digital Output] option is set to [DTS re-encode], the DTS Re-encode audio is output for BD-ROM discs, and the original audio is output for the other discs (like [Primary Pass-Thru]).
Appendix Video Output Resolution When the non-copy protected media is playing back Video Out Resolution HDMI OUT COMPONENT VIDEO OUT HDMI connected HDMI disconnected 576i 576p 576i 576p 576p 576p 720p 720p 720p 1080i 1080i 1080p /24 Hz 1080p / 24 Hz 576i 1080i 1080i 1080p / 50 Hz 1080p / 50 Hz 576i 1080i When the copy protected media is playing back Video Out Resolution HDMI OUT HDMI disconnected 576i 576p 576p 576p 720p 720p 576i 1080i 1080i 576i 576p 1080p /24 Hz
Appendix 71 System Specifications Laser: Semiconductor laser General wavelength: 405 nm / 650 nm Power requirements: AC 200-240 V ~, 50/60 Hz Signal system: Standard PAL/NTSC colour TV system Power consumption: 20 W Frequency response: 20 Hz to 20 kHz (48 kHz, 96 kHz, 192 kHz sampling) Dimensions (W x H x D): Approx. 430 x 44 x 204 mm without foot Signal-to-noise ratio: Net Weight (Approx.
Appendix Important Information Relating to Network Services PLEASE READ CAREFULLY. USE OF THE NETWORK SERVICES IS SUBJECT TO THE FOLLOWING TERMS AND CONDITIONS. Use of the Network Services requires an Internet connection which is sold separately and for which you are solely responsible. The Network Services may be limited or restricted depending upon the quality, capabilities and technical limitations of your Internet service.
Appendix Open source software notice The following GPL executables and LGPL libraries used in this product are subject to the GPL2.0/ LGPL2.1 License Agreements: GPL EXECUTABLES: Linux kernel 2.6, bash, busybox, cramfs, dhcpcd, e2fsprogs, fdisk, mkdosfs, mtd-utils, net-tools, procps, samba-3.0.25b, sysutils, tcpdump, tftpd, tinylogin, unzip, utelnetd LGPL LIBRARIES: uClibc, DirectFB, blowfish, cairo, ffmpeg, iconv, libusb, mpg123 gSOAP Public License 1.
Web site Telephone Россия ru.lgservice.com Україна ua.lgservice.com Қазақстзн kz.lgservice.com Беларус ru.lgservice.com Latvija lv.lgservice.com Lietuva lt.lgservice.com Eesti ee.lgservice.com 8-800-200-7676 8-800-303-0000 8-8000-805-805 8-820-0071-1111 8-0003-271 8-800-30-800 800-9990 As an ENERGY STAR® Partner, LG has determined that this product or product models meet the ENERGY STAR® guidelines for energy efficiency. ENERGY STAR® is a U.S. registered mark. BD561-P-BUKRLLK-ENG.
