OWNER’S MANUAL Network 3D Blu-ray™ Sound Bar Please read this manual carefully before operating your set and retain it for future reference.
Getting Started Safety Information CAUTION CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Getting Started This device is equipped with a portable battery or accumulator. 1 Getting Started Safety way to remove the battery or the battery from the equipment: Remove the old battery or battery pack, follow the steps in reverse order than the assembly. To prevent contamination of the environment and bring on possible threat to human and animal health, the old battery or the battery put it in the appropriate container at designated collection points.
Getting Started RF Radiation Exposure Statement This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. yy Because AACS (Advanced Access Content System) is approved as content protection system for Blu-ray Disc format, similar to use of CSS (Content Scramble System) for DVD format, certain restrictions are imposed on playback, analog signal output, etc., of AACS protected contents.
Table of Contents Table of Contents 1 Getting Started 3 8 8 11 12 12 12 12 12 13 14 15 Safety Information Introduction – Playable Discs and symbols used in this manual – About the “7” Symbol Display – File compatibility – AVCHD (Advanced Video Codec High Definition) – About DLNA – Certain System Requirements – LG Remote – WOL (Wake On LAN) – Regional Code – Compatibility Notes Remote control Player (Front) Player (Rear) 2 Connecting 16 16 17 17 18 18 19 19 20 20 20 21 21 22 22 23 24 24 27 27 – W
Table of Contents 49 50 50 52 53 53 54 55 55 55 55 55 55 55 56 56 57 57 – Changing subtitle code page – Changing the Picture Mode Audio CD Recording Viewing information from Gracenote Media Database Playing the iPod – Enjoying iPod on the screen – Enjoying the iPod IN mode Radio Operations – Listening to the radio – Presetting the Radio Stations – Deleting a saved station – Deleting all the saved stations – Improving poor FM reception – See information about a radio station Using the Premium Using the LG A
Getting Started Introduction 1 Playable Discs and symbols used in this manual Getting Started Media/Term Logo Symbol e Description yy Discs such as movies that can be purchased or rented. yy “Blu-ray 3D” discs and “Blu-ray 3D ONLY” discs. yy BD-R/RE discs that are recorded in BDAV format. Blu-Ray y, u, i r DVD-ROM yy BD-R/RE discs that contain Movie, Music or Photo files. yy ISO 9660+JOLIET, UDF and UDF Bridge format yy Discs such as movies that can be purchased or rented.
Getting Started ,,Note yy Depending on the recording software & the finalization, some recorded discs (CD-R/RW, DVD±R/RW, BD-R/RE) may not be playable. yy BD-R/RE, DVD±R/RW and CD-R/RW discs recorded using a personal computer or a DVD or CD Recorder may not play if the disc is damaged or dirty, or if there is dirt or condensation on the player’s lens.
Getting Started File compatibility Movie files 1 Getting Started File Location File Extension Codec Format Audio Format Subtitle “.avi”, “.divx”, “.mpg”, “.mpeg”, “.mkv”, “.mp4”, “.asf”, “.wmv”, “.m4v” (DRM free) DIVX3.xx, DIVX4.xx, DIVX5.xx, DIVX6.xx (Standard playback only), XVID, MPEG1 SS, H.264/MPEG-4 AVC, MPEG2 PS, MPEG2 TS, VC-1 SM (WMV3) Dolby Digital, DTS, MP3, WMA, AAC, AC3 SubRip (.srt / .txt), SAMI (.smi), SubStation Alpha (.ssa/.txt), MicroDVD (.sub/.txt), VobSub (.
Getting Started ,,Note yy The file name is limited to 180 characters. yy Maximum files/folder: Less than 2 000 (total number of files and folders) yy File compatibility may differ depending on the server. yy Because the compatibility on DLNA server are tested on the bundle DLNA server (Nero MediaHome 4 Essentials) environment, file requirements and playback functions may differ depending on media servers. yy The file requirements on page 10 are not always compatible.
1 Getting Started Getting Started Certain System Requirements Compatibility Notes For high definition video playback: yy Because BD-ROM is a new format, certain disc, digital connection and other compatibility issues are possible. If you experience compatibility problems, please contact an authorized Customer Service Center. yy High definition display that has HDMI input jacks. yy BD-ROM disc with high definition content.
Getting Started 13 Remote control SKIP SPEAKER LEVEL VOL SOUND EFFECT MUTE PRESET ENTER TUNING R TUNING T HOME HOME (n): Displays or exits the [Home Menu]. B (OPEN/CLOSE): Inserts or release a disc. INFO/MENU (m): Displays or exits On-Screen Display. FUNCTION: Changes input mode. Direction buttons: Selects an option in the menu. PRESET +/-: Selects programme of Radio. MUSIC ID: When connected to the network, can provide information about the current song while movie playback.
Getting Started Player (Front) 1 Getting Started a 1/! (POWER) Button >>Caution b DM (PLAY / PAUSE) Precautions in using the touch buttons c I (STOP) yy Use the touch buttons with clean and dry hands. - In a humid environment, wipe out any moisture on the touch buttons before using. d AA DD (SKIP) e F (Function) Changes the input source or function. f - + (Volume) g B (OPEN/CLOSE) h USB Port i Disc slot yy Do not press the touch buttons hard to make it work.
Getting Started 15 Player (Rear) 1 Getting Started a Cooling Fan h PORT. IN b LAN port i VIDEO OUT c HDMI OUT d HDMI IN 1/2 e iPod (24 pin) Connect to the furnished iPod cradle.
Connecting 16 Wireless connection Connect the AC power cords of all the systems to a wall outlet. When you turn on the player, the wireless connection will be completed automatically. LED indicator 2 Connecting LED Color Operation Blue or yellow (Blink) The connection is not completed. Blue or yellow The connection is completed. Red The connection is in standby mode or failed. Off (No display) The AC power cord is unplugged.
Connecting Connecting to Your TV Make one of the following connections, depending on the capabilities of your existing equipment. yy HDMI connection (page 17) yy Video connection (page 19) HDMI Connection If you have a HDMI TV or monitor, you can connect it to this player using a HDMI cable (Type A, High speed HDMI™ cable with Ethernet). Connect the HDMI jack on the player to the HDMI jack on a HDMI compatible TV or monitor.
Connecting ,,Note yy If a connected HDMI device does not accept the audio output of the player, the HDMI device’s audio sound may be distorted or may not output. yy When you use HDMI connection, you can change the resolution for the HDMI output. (Refer to “Resolution Setting” on page 19.) 2 Connecting yy Select the type of video output from the HDMI OUT jack using [HDMI Color Setting] option on the [Setup] menu (see page 29).
Connecting 19 ,,Note Video Connection Connect the COMPOSITE jack on the player to the video in jack on the TV using a video cable. You can hear the sound through the system’s speakers. Rear of the unit TV Resolution Setting The player provides several output resolutions for HDMI OUT jack. You can change the resolution using [Setup] menu. 1. Press HOME (n). 2. Use A/D to select the [Setup] and press ENTER (b). The [Setup] menu appears. 3.
Connecting Antenna connection Connect the supplied antenna for listening to the radio. Connections with external device PORT. IN connection Rear of the unit 2 You can enjoy the sound from your portable audio player through the speakers of this system. Connecting Connect the headphones (or line out ) jack of the portable audio player into the PORT. IN socket of this unit. And then select the [PORTABLE] option by pressing FUNCTION and ENTER (b).
Connecting OPTICAL IN connection HDMI IN 1/2 connection You can enjoy the sound from your component with a digital optical connection through the speakers of this system. You can enjoy the pictures and sound from your component through this connection. Connect the optical output jack of your component into the OPTICAL IN jack on the unit. And then select the [OPTICAL IN] option by pressing FUNCTION and ENTER (b). Or press OPTICAL to select directly.
Connecting Connecting to your Home Network 2 Connecting This player can be connected to a local area network (LAN) via the LAN port on the rear panel or the internal wireless module. By connecting the unit to a broadband home network, you have access to services such as software updates, BD-LIVE interactivity and on-line content services.
Connecting 23 Wired Network Setup If there is a DHCP server on the local area network (LAN) via wired connection, this player will automatically be allocated an IP address. After making the physical connection, a small number of home networks may require the player’s network setting to be adjusted. Adjust the [NETWORK] setting as follow. Preparation 1. Select [Connection Setting] option in the [Setup] menu then press ENTER (b). 2. The [Connection Setting] menu appear on the screen.
Connecting Wireless Network Connection Another connection option is to use an Access Point or a wireless router. The network configuration and connection method may vary depending on the equipment in use and the network environment. 2 Connecting This player is equipped with an IEEE 802.11n (2.4 GHz band) wireless module, which also supports the 802.11b/g standards. For the best wireless performance, we recommend using a IEEE 802.11n certified Wi-Fi network (access point or wireless router).
Connecting 25 4. The player scans the all available access points or wireless routers within range and display them as a list. Use W/S to select an access point or wireless router on the list, and then press ENTER (b). ,,Note yy WEP security mode generally have 4 keys available on an access point or wireless router’s setting. If your access point or wireless router use WEP security, enter the security code of the key “No.1” to connect on your home network.
Connecting Notes on Network Connection: yy Many network connection problems during set up can often be fixed by re-setting the router or modem. After connecting the player to the home network, quickly power off and/ or disconnect the power cable of the home network router or cable modem. Then power on and/or connect the power cable again.
Connecting 27 USB device connection This player can play movie, music and photo files contained in the USB device. Playback content in the USB device 1. Insert a USB device to the USB port until it fits into place. ,,Note yy This player supports USB flash drive/ external HDD formatted in FAT16, FAT32 and NTFS when accessing files (music, photo, movie). However, for BD-LIVE and Audio CD recording, only FAT16 and FAT32 formats are supported.
System Setting Settings [DISPLAY] Menu TV Aspect Ratio Adjust the Setup Settings You can change the settings of the player in the [Setup] menu. 1. Press HOME (n). Select a TV aspect ratio option according to your TV type. [4:3 Letter Box] Select when a standard 4:3 TV is connected. Displays theatrical images with masking bars above and below the picture. [4:3 Pan Scan] 3 Select when a standard 4:3 TV is connected. Displays pictures cropped to fill your TV screen.
System Setting 29 Resolution HDMI Color Setting Sets the output resolution HDMI video signal. Refer to page 19 for details about the resolution setting. Select the type of output from the HDMI OUT jack. For this setting, please refer to the manuals of your display device. [Auto] If the HDMI OUT jack is connected to TVs providing display information (EDID), automatically selects the resolution best suited to the connected TV. [YCbCr] [1080p] Select when connecting to a DVI display device.
System Setting [LANGUAGE] Menu [AUDIO] Menu Display Menu HD AV Sync Select a language for the [Setup] menu and onscreen display. Sometimes Digital TV encounters a delay between picture and sound. If this happens you can compensate by setting a delay on the sound so that it effectively ‘waits’ for the picture to arrive: this is called HD AV Sync. Use W S to scroll up and down through the delay amount, which you can set at anything between 0 and 300 ms.
System Setting 31 Connect wireless speakers [LOCK] Menu When the unit is manufactured, the ID is already set. If interference occurs or you use a new wireless unit, an ID should be set again. The [LOCK] settings affect only CinemaNow movie, BD and DVD playback. When the [Wireless Speaker Connection Guide] appears, press the PAIRING button on the rear of the wireless subwoofer. -- If you see the blue or yellow LED indicator light on the wireless subwoofer, the pairing was successful.
System Setting DVD Rating [NETWORK] Menu Blocks playback of rated DVD based on their content. (Not all discs are rated.) The [NETWORK] settings are needed to use the software update, BD Live and on-line content services. [Rating 1-8] Rating one (1) has the most restrictions and rating eight (8) is the least restrictive. [Unlock] If you select [Unlock], parental control is not active and the disc plays in full. Blu-ray Disc Rating 3 Set an age limit of BD-ROM play.
System Setting 33 BD-LIVE connection [OTHERS] Menu You can restrict Internet access when BD-LIVE functions are used. DivX VOD [Permitted] Internet access is permitted for all BD-LIVE contents. [Partially permitted] Internet access is permitted only for BDLIVE contents which have content owner certificates. Internet access and AACS Online functions are prohibited for all BD-LIVE contents without a certificate.
System Setting Auto Power Off The screen saver appears when you leave the player in Stop mode for about five minutes. If you set this option to [On], the unit automatically turns off within 25 minutes since the Screen Saver is displayed. Set this option to [Off ] to leave the screen saver until the unit is operated by the user. Network Play 3 System Setting This function allows you to control the playback of media streamed from DLNA media server by a DLNA certified smartphone.
System Setting 35 Sound Effect Setting the [User EQ] You can select a suitable sound mode. Press SOUND EFFECT repeatedly until the desired mode appears on the front panel display or the TV screen. The displayed items for the equalizer maybe different depending on sound sources and effects. [Natural]: You can enjoy comfortable and natural sound. [Bypass]: Software with multichannel surround audio signals is played according to the way it was recorded.
Operating General Playback Playing a Disc ert Using [HOME] menu 1. Insert a disc. The home menu appears when you press HOME (n). Use W/S/A/D to select a category and press ENTER (b). For the most Audio CD, BD-ROM and DVD-ROM discs, playback starts automatically. 2. Press HOME (n). 3. Select [Movie] or [Music] using A/D, and press ENTER (b). 4. Select [Blu-ray Disc], [DVD], [VR] or [Audio] option using W/S, and press ENTER (b).
Operating 37 Playing Blu-ray 3D disc e Enjoying BD-Live™ e This player can play the Blu-ray 3D discs which contains separate views for the left and right eyes. BD-ROM supporting BD-Live (BD-ROM version 2 Profile 2) that has a network extension function allows you to enjoy more functions such as downloading new movie trailers by connecting this unit to the internet. Preparation In order to playback Blu-ray 3D title in stereoscopic 3D mode, you need to: yy Check your TV is 3D capable and has HDMI 1.
Operating Playing a file on a network server yui This player can play movie, music and photo files located in a PC or a DLNA server through your home network. 1. Check the network connection and settings (page 22). 2. Press HOME (n). 3. Select [Movie], [Photo] or [Music] using A/D, and press ENTER (b). 4. Select a DLNA media server or a share folder on your PC on the list using W/S, and press ENTER (b).
Operating 39 Wi-Fi Direct™ Connection Connecting to a Wi-Fi Direct™ certified device 6. Select a server that shared from the connected Wi-Fi Direct™ device using W/S, and press ENTER (b) to navigate the server. yui This player can play movie, music and photo files located in a Wi-Fi Direct™ certified device. The Wi-Fi Direct™ technology make the player to be directely connected to a Wi-Fi Direct™ certified device without connecting to a network device such as an access point. 1.
Operating Connecting to a Wi-Fi available devices yui 8. Select a server that shared from the connected Wi-Fi device using W/S, and press ENTER (b) to navigate the server. This player can connect to a general Wi-Fi device using Wi-Fi Direct™ function. 1. Set the [Wi-Fi Direct] option on the [Setup] menu to [On] (page 32). 2. Press HOME (n). 3. Select [Movie], [Photo] or [Music] using A/D, and press ENTER (b). 4. Select [Wi-Fi Direct] option using W/S, and press ENTER (b).
Operating Basic operations for video and audio content Basic operations for photo content To stop playback To play a slide show Press Z (STOP) while playback. Press d (PLAY) to start slide show. To pause playback To stop a slide show Press M (PAUSE) while playback. Press d (PLAY) to resume playback. Press Z (STOP) while slide show. To play frame-by-frame (Video) Press M (PAUSE) while movie playback. Press M (PAUSE) repeatedly to play Frame-by-Frame playback.
Operating Resume playback eroyt, u The unit records the point where you pressed the Z (STOP) depending on the disc. If “MZ (Resume Stop)” appears on the screen briefly, press d (PLAY) to resume playback (from the scene point). If you press Z (STOP) twice or unload the disc, “Z(Complete Stop)” appears on the screen. The unit will clear the stopped point. ,,Note yy The resume point may be cleared when a button is pressed (for example; 1 (POWER), B (OPEN/CLOSE), etc).
Operating 43 Advanced Playback Repeating a specific portion erot Repeat Playback erotu This player can repeat a portion you have selected. During playback, press REPEAT (h) repeatedly to select a desired repeat mode. BDs/DVDs jA- – Selected portion will be repeated continually. jChapter – The current chapter will be played back repeatedly. jTitle – The current title will be played back repeatedly. To return to normal playback, press REPEAT (h) repeatedly to select [Off ]. 1.
Operating Marker Search eroy Using the search menu eroy You can start playback from up to nine memorized points. Using search menu, you can easily to find the point where you want to start playback. To enter a marker To search a point 1. While playback, press MARKER at the desired point. The Marker icon appears on the TV screen briefly. 1. During playback, press SEARCH to display the search menu. 2. Repeat step 1 to add up to nine markers. To recall a marked scene 1.
Operating 45 Changing content list view yui Viewing content information y On the [Movie], [Music] or [Photo] menu, you can change the content list view. The player can display the content information. Method 1 2. Press INFO/MENU (m) to display the option menu. Press red (R) colored button repeatedly. 1. Select a file using W/S/A/D. 3. Select the [Information] option using W/S, and press ENTER (b). The file information appears on the screen.
Operating Last Scene Memory er Options while viewing a photo i This unit memorizes the last scene from the last disc that is viewed. The last scene remains in memory even if you remove the disc from the unit or switch off the unit. If you load a disc that has the scene memorized, the scene is automatically recalled. You can use various options during viewing a photo in full screen. ,,Note 1. While viewing a photo in full screen, press INFO/ MENU (m) to display the option menu. 2.
Operating 47 Listening to music while slide show i You can display photo files while listening to music files. 1. While viewing a photo in full screen, press INFO/ MENU (m) to display the option menu. 2. Use W/S to select [Music Select] option, and press ENTER (b) to display the [Music Select] menu. 3. Use W/S to select a device, and press ENTER (b). On-Screen display You can display and adjust various information and settings about the content. Displaying content information on-screen eroy 1.
Operating 2. Select an option using W/S. 3. Use A/D to adjust the selected option value. 4. Press BACK (x) to exit the On-Screen display. ,,Note yy If no button is pressed for a few seconds, the on-screen display disappears. yy A title number cannot be selected on some discs. 1. Press INFO/MENU (m) during playback. The time search box shows the elapsed playing time. 2. Select the [Time] option and then input the required start time in hours, minutes, and seconds from left to right.
Operating 49 Selecting a subtitle language eroy Changing the TV Aspect Ratio eroy 1. During playback, press INFO/MENU (m) to display the On-Screen display. You can change the TV aspect ratio setting while playback. 2. Use W/S to select the [Subtitle] option. 1. During playback, press INFO/MENU (m) to display the On-Screen display. 3. Use A/D to select desired subtitle language. 4. Press BACK (x) to exit the On-Screen display.
Operating Changing the Picture Mode eroy You can change the [Picture mode] option while playback. 1. During playback, press INFO/MENU (m) to display the On-Screen display. 2. Use W/S to select the [Picture Mode] option. 3. Use A/D to select desired option. 4. Press BACK (x) to exit the On-Screen display. Setting the [User] option 1. During playback, press INFO/MENU (m) to display the On-Screen display.
Operating 8. Use W/S/A/D to select [OK], and press ENTER (b) to start Audio CD recording. If you want to stop in progressing Audio CD recording, press ENTER (b) while [Cancel] is highlighted. 9. A message appears when Audio CD recording is completed. Press ENTER (b) to check the audio file created in the destination folder. ,,Note yy The table below shows the average recording time from an music track with 4 minutes of playback time to a audio file with 192 kbps as an example.
Operating Viewing information from Gracenote Media Database The player can access the Gracenote Media Database and loads the music information so that Track name, Artist Name, Genre and other text information can be displayed on the list. Audio CD When you insert an Audio CD, the player starts playback automatically and load the music title from the Gracenote Media Database. If there is no music information from the database, music titles will not appear on the screen. Music file 4 Operating 1.
Operating 53 Playing the iPod When you connect the iPod on the HOME menu, the player plays a music automatically. Or a menu for the file type selection will appear. You can enjoy the sound with your iPod. For details about iPod, refer to the iPod’s User Guide. Preparation yy To view iPod’s Videos and Photos on the TV screen. -- Be sure to use the video connection through the COMPOSITE jack on the rear panel of this unit. Select the appropriate video input mode on the TV.
Operating Enjoying the iPod IN mode You can operate your iPod by using the supplied remote control and controls on your iPod. 1. Connect the cradle so that the mark s is upwards. Put your iPod on it. Connect the iPod firmly. If you turn this unit on, your iPod is automatically turned on and recharging starts. 2. Press FUNCTION to select iPod IN mode. W/S/A/D Selects an option in the menu. d/ENTER Starts playback the music or video. M To pause while it is playing.
Operating 55 Radio Operations Be sure that the antennas are connected. (Refer to the page 20) Listening to the radio 1. Press FUNCTION until TUNER (FM) appears in the display window. The last received station is tuned in. Deleting a saved station 1. Press PRESET (- / +) to select a preset number you want to delete. 2. Press CLEAR, the preset number will blink in the display window. 3. Press CLEAR again, to delete the selected preset number. Deleting all the saved stations 2.
Operating Using the Premium Using the LG Apps You can use various content services via Internet with the Premium feature. You can use the LG application services on this player via Internet. You can easily find and download various applications from LG App store. 1. Check the network connection and settings (page 22). 2. Press HOME (n). 3. Select the [Premium] using A/D, and press ENTER (b). 4. Select an on-line service using W/S/A/D, and press ENTER (b).
Operating 57 Signing in Managing my Apps To use the [LG Apps] feature, you need to sign in with your account. You can move or delete an installed application in the [My Apps] menu. 1. On the [LG Apps] or [My Apps] screen, press red (R) colored button. Move an application 2. Fill the [ID] and [Password] field using the virtual keyboard. 1. Select an application, and press green (G) colored button to display the options. If you do not have an account, press red (R) colored button to register. 3.
Troubleshooting Troubleshooting General Symptom Cause & Solution The Power does not turned on. Plug the power cord into the wall outlet securely. The unit does not start playback. yy Insert a playable disc. (Check the disc type, color system, and regional code.) yy Place the disc with the playback side down. yy Clean the disc. yy Cancel the Rating function or change the rating level. The angle cannot be changed. Multi-angles are not recorded on the DVD Video being played.
Troubleshooting 59 Network Symptom Cause & Solution BD-LIVE feature does not work. yy The connected USB storage may not have enough space. Connect the USB storage with at least 1GB free space. yy Ensure that the unit is correctly connected to the local area network and can access the internet (see page 22). yy Your broadband speed may not fast enough to use the BD-LIVE features. Contact your Internet Service Provider (ISP) and increase the broadband speed is recommended.
Troubleshooting Picture Symptom Cause & Solution There is no picture. yy Select the appropriate video input mode on the TV so the picture from the unit appears on the TV screen. yy Connect the video connection securely. yy Check the [HDMI Color Setting] in the [Setup] menu is set to the appropriate item that conforms to your video connection. yy Your TV may not suppot the resolution you have set on the player. Change the resolution that your TV accepts.
Appendix SPEAKER LEVEL 61 VOL SOUND EFFECT MUTE Controlling a TV with the Supplied Remote Control PRESET ENTER TUNING R TUNING T HOME You can control your TV using the buttons below. By pressing You can 1 (TV POWER) Turn the TV on or off. AV/INPUT Switch the TV’s input source between the TV and other input sources. PR/CH W/S Scan up or down through memorized channels.
Appendix Network Software Update Network update notification From time to time, performance improvements and/or additional features or services may be made available to units that are connected to a broadband home network. If there is new software available and the unit is connected to a broadband home network, the player will inform you about the update as follows. Software Update You can update the player using the latest software to enhance the products operation and/or add new features.
Appendix 63 4. If newer version exists, the message “Do you want to update?” appears. 5. Select [OK] to start update. (Selecting [Cancel] will end the update.) >>Caution Do not turn off the power during the software update. 6. When update is completed, the message, “Update is complete.” will appear, and then power will turn off automatically after 5 seconds. 7. Turn the power back on. The system now operates with the new version.
Appendix About Nero MediaHome 4 Essentials Nero MediaHome 4 Essentials is a software for sharing movie, music and photo files stored on your computer to this player as a DLNA-compatible digital media server. ,,Note yy The Nero MediaHome 4 Essentials CDROM is designed for PCs and should not be inserted in this player or in any product other than a PC. yy The supplied Nero MediaHome 4 Essentials CD-ROM is a customized software edition only for sharing files and folders to this player.
Appendix 65 7. If you accept all conditions, click [I accept the License Conditions] check box and click [Next]. Installation is not possible without this agreement. 8. Click [Typical] and click [Next]. The installation process is started. 9. If you want to take part in the anonymous collection of data, select the check box and click the [Next] button. 10. Click the [Exit] button to complete the installation.
Appendix Area Code List Choose an area code from this list.
Appendix 67 Language code List Use this list to input your desired language for the following initial settings: [Disc Audio], [Disc Subtitle] and [Disc Menu].
Appendix Trademarks and Licenses Blu-ray Disc™, Blu-ray™, Blu-ray 3D™, BD-Live™, BONUSVIEW™ and the logos are trademarks of the Blu-ray Disc Association. Manufactured under license under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,226,616; 6,487,535; 7,392,195; 7,272,567; 7,333,929; 7,212,872 & other U.S. and worldwide patents issued & pending.
Appendix 69 DivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under license. Gracenote®, Gracenote logo and logotype, and the “Powered by Gracenote” logo are either registered trademarks or trademarks of Gracenote, Inc. in the United States and/or other countries. Music recognition technology and related data are provided by Gracenote®. Portions of the content is copyright © Gracenote or its providers.
Appendix Specifications General Power requirements Refer to main label on the rear panel. Power consumption Refer to main label on the rear panel. Dimensions (W x H x D) 1,000 x 95 x 207 mm Net Weight (Approx.) 5.2 kg Operating temperature 5 °C to 35 °C (41 °F to 95 °F) Operating humidity 5 % to 90 % Inputs/Outputs COMPOSITE 1.0 V (p-p), 75 Ω, sync negative, RCA jack x 1 HDMI IN/OUT (video/audio) 19 pin (Type A, HDMI™ Connector) DIGITAL IN (OPTICAL) 3 V (p-p), Optical jack x 1 PORT.
Appendix 71 System Laser Semiconductor laser Wavelength 405 nm / 650 nm Signal system Standard PAL/NTSC color TV system Frequency response 20 Hz to 18 kHz (48 kHz, 96 kHz, 192 kHz sampling) Harmonic distortion Less than 0.05 % Dynamic range More than 80 dB LAN port Ethernet jack x 1, 10BASE-T / 100BASE-TX Wireless LAN (internal antenna) Integrated IEEE 802.11n wireless networking access, compatible with 802.11b/g Wi-Fi networks.
Appendix Maintenance Notes on Discs Handling Discs Handling the Unit When shipping the unit Please save the original shipping carton and packing materials. If you need to ship the unit, for maximum protection, re-pack the unit as it was originally packed at the factory. Keeping the exterior surfaces clean yy Do not use volatile liquids such as insecticide spray near the unit. yy Wiping with strong pressure may damage the surface.
Appendix 73 Important Information Relating to Network Services All information, data, documents, communications, downloads, files, text, images, photographs, graphics, videos, webcasts, publications, tools, resources, software, code, programs, applets, widgets, applications, products and other content (“Content”) and all services and offerings (“Services”) provided or made available by or through any third party (each a “Service Provider”) is the sole responsibility of the Service Provider from whom it o
