INSTALLATION 8 @ INSTALLATION Product Overview The images in this guide may be different from the actual components and accessories, which are subject to change by the manufacturer without prior notice for product improvement purposes. HETTIE NOTE + For your safety and for extended product life, use only authorized components.
—ol|® _maintainable bock Page 10 Tuesday, March 31, 2020 5:28 PM 10 INSTALLATION ol Accessories 1: This accessory is only available on some models.
Age 11 Tuesday, March 81, 2020 5:28 FM installation 1 Specifications Appliance Blonde Agrsikaiiaik Dimensions 102inX10.6inX44.1in (width X Depth X Height) 260 Mira X 270 mm x 1320 mm Weight Approximately 5.67 Ib (2.
_main,book bock Page 12 Tuesday, March 31, 2020 5:28 PM 12 INSTALLATION Installing the Charging Station 4) WARNING * To prevent tipping, self-standing mode installations should be anchored to the wall using the provided stand anchoring screw, anchoring block and double-sided tape. A. CAUTION Do not allow children or pets to hang onto the charging station. They could be injured or cause damage to the appliance.
"5 main, schoolbook Age 13 Tuesday, March 81, 2020 5:28 FM INSTALLATION Assemble the charging station onto the top of the floor stand pipe. HETTIE 7 Plug the power cord nto the power outlet, Using Double-Sided Tape to Secure the Appliance 4 connect the power adapter to the port on the 4 use the double-sided tape § to attach the back of the charging station. wall anchoring block @ to the charging v station.
—ol|® | ® Us _main,book bock Page 14 Tuesday, March 31, 2020 5:28 PM 14 INSTALLATION —o|® Wall-Mounted Installation For wall-mounted installations, the charging station must be attached securely to the wall using the provided (short) wall anchoring screws. + The detachable nozzle storage cannot be attached to the charging station In a wall mounted installation. 1 Connect the power adapter to the port on the back of the charging station. 2 Drill 2 holes and insert the drywall anchors (if needed) at least 3.
"5 main, schoolbook Age 15 Tuesday, March 81, 2020 5:28 FM Assembling the Appliance Follow these steps to safely assemble the appliance, 4 Firmly attach the extension pipe @, nozzle @, or tool onto the product body @. * To detach the extension pipe, press the extension pipe release button 2 Puttee product body on the charging station. « See Charging the Battery for instructions on installing and charging the battery.