OWNER'S MANUAL VACUUM CLEANER • Charge the battery fully before first use. • Read the Safety Instructions before using the product. • After reading this manual, keep it in an easily accessible location. ENGLISH A91********** MFL69883668 Rev.03_110821 www.lg.com Copyright © 2021 LG Electronics Inc. All Rights Reserved.
TABLE OF CONTENTS 3 IMPORTANT SAFETY INSTRUCTIONS 3 3 8 READ ALL INSTRUCTIONS BEFORE USE WARNING STATEMENTS CAUTION STATEMENTS 9 INSTALLATION 9 12 15 Product Overview Installing the Charging Station Storing the Accessories 16 OPERATION 16 17 18 Getting Started Charging the Battery Using the Nozzles and Tools 20 MAINTENANCE 20 22 Cleaning the Appliance Cleaning the Nozzle 25 TROUBLESHOOTING 25 Before Calling for Service 27 LIMITED WARRANTY 27 USA
IMPORTANT SAFETY INSTRUCTIONS 3 IMPORTANT SAFETY INSTRUCTIONS Safety Messages Your safety and the safety of others are very important. We have provided many important safety messages in this manual and on your appliance. Always read and follow all safety messages. This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or injure you and others. All safety messages will follow the safety alert symbol and either the word WARNING or CAUTION.
IMPORTANT SAFETY INSTRUCTIONS Battery • Never use the battery, adapter, and the charging station from other appliances with this appliance. Use only the battery and the charging station provided by LG Electronics. • Use appliances only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire. • Recharge only with the charger specified by the manufacturer.
IMPORTANT SAFETY INSTRUCTIONS 5 • Avoid operating the appliance in areas where there is a risk of leakage of flammable gas, industrial oil or metallic dust. • Do not store or install the appliance, power cord or plug near heating devices or open flames. • To prevent tipping, self-standing mode installations should be anchored to the wall using the provided stand anchoring screw, anchoring block and double-sided tape.
IMPORTANT SAFETY INSTRUCTIONS • Only qualified technicians or service personnel from LG Electronics may disassemble, repair or modify the appliance. • Never insert a sharp metal object such as a pin, nail or knife in a hole or gap in the appliance or the charging station. • Do not vacuum liquids with this appliance. Make sure that no water, beverage or detergent gets inside the appliance or the charging station.
IMPORTANT SAFETY INSTRUCTIONS 7 • Do not spray or use water, inflammable materials such as gasoline or thinners, or surfactants such as detergent or bath soap near the appliance. Disposal • Keep packing materials out of the reach of children. Packaging materials can pose a suffocation risk for children. • Destroy the carton, plastic bag, and other packing materials after the appliance is unpacked. Children might use them for play.
IMPORTANT SAFETY INSTRUCTIONS CAUTION STATEMENTS CAUTION • To reduce the risk of injury to persons, malfunction, or damage to the product or property when using the appliance, follow basic safety precautions, including the following: Operation • This appliance has a built-in safety device to prevent damage from overheating. If the appliance becomes overheated after extended use, it may automatically turn off.
INSTALLATION 9 INSTALLATION The images in this guide may be different from the actual components and accessories, which are subject to change by the manufacturer without prior notice for product improvement purposes. NOTE • For your safety and for extended product life, use only authorized components. The manufacturer is not responsible for product malfunction, property damage or bodily injury caused by the use of separately purchased unauthorized components, parts, or non-LG products.
INSTALLATION Accessories Nozzles † This accessory is only available on some models.
INSTALLATION 11 • Battery Run Time - Up to 6 minutes in Turbo Mode - Up to 11 minutes in Power Mode - Up to 50 minutes in Normal Mode (using with the Tool) • Charger Adapter - Model: ADC-30FSA-30 29430EPCU - Input: 100 V - 240 V~ 50/60 Hz, 0.8 A - Output: DC 29.4 V 1.0 A • Dimensions are given for the assembled product body, extension pipe and nozzle. • Battery run time is the result of using a fully charged battery according to the LG Electronics test standard.
INSTALLATION Installing the Charging Station CAUTION • Do not allow children or pets to hang onto the charging station. They could be injured or cause damage to the appliance. 3.25 ft • Take care not to drop the product parts while unpacking them to avoid appliance damage or personal injury. NOTE • The cost of a service call to install or reinstall the charging station is not covered under the warranty. 3 Attach the charging station to the wall with the wall anchoring screws.
INSTALLATION 13 • Keep fingers away from pinch points when assembling the appliance or the charging station. Assemble the charging station onto the top of the floor stand pipe. 4 Connect the power adapter to the port on the back of the charging station. 5 Drill a hole in the wall and insert the drywall anchor b if needed. ENGLISH 3 NOTE • The charging station can be removed as needed. To remove it, hold the floor stand dock steady and pull up on the charging station.
INSTALLATION 7 2 Place the charging station on a hard and level floor. 3 Separate the extension pipe and nozzle from the product body before charging or storing the appliance. 4 Plug the power cord into the power outlet. Plug the power cord into the power outlet. Using Double-Sided Tape to Secure the Appliance 1 Use the double-sided tape a to attach the wall anchoring block b to the charging station.
INSTALLATION 15 ENGLISH Storing the Accessories Storing the Tools Store the frequently used tools such as the combination tool and crevice tool at the bottom of the charging station. • To remove a tool, press the release button at the front of the tool.
OPERATION OPERATION Getting Started • Do not use tools to clean a TV, monitor or LCD display as they may scratch these surfaces. Before Using the Appliance • Make sure that the exhaust filter and pre-filter are properly assembled before using the appliance. • Close the dust bin cover properly before using the appliance. If the dust bin cover is left open, the suction strength may deteriorate and affect the cleaning performance. • This appliance has a built-in safety device to prevent overheating.
OPERATION 17 3 Adjust the extension pipe by pressing the length adjustment button d on the back of the pipe and sliding until it clicks into place at the desired length. Charging the Battery • The extension pipe extends in four steps. • Make sure that the adapter is connected to both the charging station and the power outlet. Before Charging the Battery • The battery will not be charged if the indoor temperature is below 41 °F (5°C).
OPERATION WARNING • Make sure to securely fit the product body onto the charging station. If the appliance falls off the charging station, it could cause injuries, property damage or product damage. Charging the Auxiliary Battery An auxiliary battery can be stored and charged in the base of the charging station. CAUTION • Keep fingers away from pinch points when assembling or disassembling the battery from the product body or the charging station to avoid personal injury.
OPERATION 19 - Vinyl flooring, tiles, marble This nozzle lets you clean sheets and bedding more effectively. It removes dust in bedding using strong suction and a punching motion. • Lower the suction level when vacuuming bedding such as duvet covers to avoid the thin fabric getting sucked into the nozzle. Crevice Tool Use this tool to remove dust from corners or narrow spaces. • Use it for areas with static electricity such as mats.
MAINTENANCE MAINTENANCE Cleaning the Appliance remove the foreign objects before resuming use of the appliance. Before Cleaning the Appliance To maintain the optimum suction power, the cyclonic mesh filter, the exhaust filter and the prefilter should be cleaned regularly and washed under running water at least once a month. • Turn off the power before cleaning the appliance. • The frequency of cleaning varies depending on the usage environment and usage time. In a dusty environment, clean frequently.
MAINTENANCE 21 3 Insert the crevice tool c into the Cyclonic Mesh Filter b and turn it counterclockwise to remove the filter. • Do not use the appliance without the Cyclonic Mesh Filter installed. Doing so could damage the product. • Do not allow foreign objects to reach the motor to avoid product damage, explosion or fire. CAUTION • Do not apply force or allow impacts to the Cyclonic Mesh Filter. Doing so could deform the filter, compromise product performance, or cause the product to malfunction.
MAINTENANCE sunlight for at least 24 hours before reassembling. 7 4 Use the combination tool d to clean any dust off the motor. Insert the clean, dry pre-filter and rotate the exhaust filter to the locked position e to reassemble it on the product body. • Do not wash the motor with water. CAUTION 5 Clean the exhuast filter by brushing the dust off it regularly and wash it in running water at least once a month.
MAINTENANCE 23 1 Press the nozzle release button a to remove the nozzle from the extension pipe or product body. 6 Slide the brush back into the nozzle and rotate the cover back into place. Turn the cover lock clockwise to lock the cover. 2 3 4 5 1 Press the nozzle release button a to remove the nozzle from the extension pipe or product body. 2 Hold down the PUSH button on the nozzle while removing the rotating brush.
MAINTENANCE 6 Press the brush cover until it clicks to lock the brush in place. Cleaning the Bedding Nozzle 1 Press the nozzle release button to remove the nozzle from the extension pipe or product body and turn the nozzle upside down. 2 Attach the crevice tool to the product body and use the vacuum to remove foreign objects and dust from the bottom of the nozzle. • Use a damp towel or cloth to remove any remaining foreign objects and dust from the bottom of the nozzle.
TROUBLESHOOTING 25 TROUBLESHOOTING ENGLISH Before Calling for Service Operation Problem The appliance does not operate. Possible Cause & Solution Battery is fully discharged. • Charge the battery. Appliance is turned off. • Press the Power button to turn on the appliance. Suction power is too weak. Dust bin is full of dust. • Empty the dust bin. Filters are clogged. • Clean the pre-filter and the exhaust filter. Inlet is clogged.
TROUBLESHOOTING Problem The appliance turns off unexpectedly or by itself after the motor speed fluctuates repeatedly. Possible Cause & Solution Battery is not fully charged. • The battery must be fully charged before cleaning. If the problem persists when the battery is fully charged and the pipes and attachments are clear from obstructions, contact an LG customer information center for service. Foreign object is in the product body, extension pipe, inlet port or nozzle.
LIMITED WARRANTY 27 LIMITED WARRANTY TERMS AND CONDITIONS ARBITRATION NOTICE: THIS LIMITED WARRANTY CONTAINS AN ARBITRATION PROVISION THAT REQUIRES YOU AND LG ELECTRONICS (“LG”) TO RESOLVE DISPUTES BY BINDING ARBITRATION INSTEAD OF IN COURT, UNLESS YOU CHOOSE TO OPT OUT. IN ARBITRATION, CLASS ACTIONS AND JURY TRIALS ARE NOT PERMITTED. PLEASE SEE THE SECTION TITLED “PROCEDURE FOR RESOLVING DISPUTES” BELOW.
LIMITED WARRANTY • Damage or failure of the Product caused by accidents, pests and vermin, lightning, wind, fire, floods, acts of nature, or any other causes beyond the control of LG. • Damage or failure of the Product caused by unauthorized modification or alteration, or if the Product is used for other than the intended purpose. • Damage or failure of the Product caused by incorrect electrical current or voltage.
LIMITED WARRANTY 29 PROCEDURE FOR RESOLVING DISPUTES: Definitions. For the purposes of this section, references to “LG” mean LG Electronics U.S.A., Inc.
LIMITED WARRANTY provided for, LG waives any rights it may have to seek attorneys’ fees and expenses from you if LG prevails in the arbitration. Hearings and Location. If your claim is for $25,000 or less, you may choose to have the arbitration conducted solely on the basis of (1) documents submitted to the arbitrator, (2) through a telephonic hearing, or (3) by an in-person hearing as established by the AAA Rules. If your claim exceeds $25,000, the right to a hearing will be determined by the AAA Rules.
Memo 31
LG Customer Information Center For inquiries or comments, visit www.lg.com or call: 1-800-243-0000 1-888-542-2623 U.S.A. CANADA Register your product Online! www.lg.
