Installation Guide

ManualsBrandsLG Electronics ManualsAppliancesA9 Cord Zero Cordless Stick Vacuum Cleaner

9INSTALLATION

ENGLISH

INSTALLATION

Product Overview

The images in this guide may be different from the actual components and accessories, which are subject

to change by the manufacturer without prior notice for product improvement purposes.

NOTE

only authorized components. The manufacturer is not

responsible for product malfunction, property damage or bodily injury caused by the use of separately

purchased unauthorized components, parts, or non-LG products.

are not installed in wall-mount installation.

Front View

Charging Station

Auxiliary Charging Station

Battery (Dual Battery )

Product Body

Extension Pipe

Nozzle

Floor Stand Dock

Floor Stand Pipe

Adapter

Tool Holders

Exhaust Filter

Pre-filter

Cyclonic Mesh Filter

Summary of content (7 pages)

PAGE 1
INSTALLATION 9 INSTALLATION The images in this guide may be different from the actual components and accessories, which are subject to change by the manufacturer without prior notice for product improvement purposes. NOTE only authorized components. The manufacturer is not responsible for product malfunction, property damage or bodily injury caused by the use of separately purchased unauthorized components, parts, or non-LG products. are not installed in wall-mount installation.
PAGE 2
10 INSTALLATION Accessories Nozzles ailable on some models.
PAGE 3
INSTALLATION 11 Battery Run Time - Up to 6 minutes in Turbo Mode - Up to 11 minutes in Power Mode - Up to 50 minutes in Normal Mode (using with the Tool) Charger Adapter - Model: ADC-30FSA-30 29430EPCU - Input: 100 V - 240 V~ 50/60 Hz, 0.8 A - Output: DC 29.4 V 1.0 A body, extension pipe and nozzle. result of using a fully charged battery according to the LG Electronics test standard. Results may be different depending on actual use environment and period of use.
PAGE 4
12 INSTALLATION Installing the Charging Station bit (6.5 mm) drill drill bit WARNING self-standing mode installations should be anchored to the wall using the provided stand anchoring screw, anchoring block and double-sided tape. (3 mm) anchors. CAUTION pets to hang onto the charging station. They could be injured or cause damage to the appliance. unpacking them to avoid appliance damage or personal injury. ed tape to attach the charging station to wallpaper.
PAGE 5
INSTALLATION 13 CAUTION 3 Assemble the charging station onto the top of the floor stand pipe. 4 Connect the power adapter to the port on the back of the charging station. 5 Drill a hole in the wall and insert the drywall anchor b if needed. ENGLISH assembling the appliance or the charging station. NOTE n be removed as needed. To remove it, hold the floor stand dock steady and pull up on the charging station. pipes or electrical wires inside the wall at the desired location.
PAGE 6
14 INSTALLATION 7 2 Place the charging station on a hard and level floor. 3 Separate the extension pipe and nozzle from the product body before charging or storing the appliance. 4 Plug the power cord into the power outlet. Plug the power cord into the power outlet. Using Double-Sided Tape to Secure the Appliance 1 Use the double-sided tape a to attach the wall anchoring block b to the charging station. CAUTION tape before attaching it to the wall anchoring block.
PAGE 7
INSTALLATION 15 ENGLISH Storing the Accessories Storing the Tools Store the frequently used tools such as the combination tool and crevice tool at the bottom of the charging station. front of the tool.