DLP Projection TV OWNER’S MANUAL MODELS: 52DC2D / 56DC1D / 62DC1D R TruSurround XT ENERGY STAR is a set of power-saving guidelines issued by the U.S. Environmental Protection Agency(EPA). As an ENERGY STAR Partner LGE U.S.A., Inc. has determined that this product meets the ENERGY STAR guidelines for energy drriciency. Please read this manual carefully and completely before operating your TV. Retain this manual for future reference.
Warning/Caution WARNING/CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING/CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Safety Instructions IMPORTANT SAFETY INSTRUCTIONS Important safety instructions shall be provided with each apparatus. This information shall be given in a separate booklet or sheet, or be located before any operating instructions in an instruction for installation for use and supplied with the apparatus. This information shall be given in a language acceptable to the country where the apparatus is intended to be used. The important safety instructions shall be entitled “Important Safety Instructions”.
Safety Instructions 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has exposed to rain or moisture, does not operate normally, or has been dropped. 15.
Contents Warning/Caution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3~4 Audio Menu Options Audio Language . . . . . . . . . . . . . . . . . . . . . . . .32 Auto Volume Leveler (EZ SoundRite) . . . . . . . .32 Introduction Auto Sound Control (EZ Sound) . . . . . . . . . . . .32 Controls/Connection Options . . . . . . . . . . . . .6~10 Manual Sound Control (EZ sound-User Option) .
Controls (Model Name: 56/62DC1D) - This is a simplified representation of front panel. - Here shown may be somewhat different from your TV.
Connection Options (Model Name: 56/62DC1D) - Here shown may be somewhat different from your TV.
Controls ( Model Name: 52DC2D) - This is a simplified representation of front panel. - Here shown may be somewhat different from your TV.
Connection Options ( Model Name: 52DC2D) - Here shown may be somewhat different from your TV.
Side Connection Panel There are four jacks on the left side on your projection TV that make connecting Audio/Video devices like video games and camcorders very simple. 52DC2D 56DC1D, 62DC1D The jacks are like those found on the back jack connection panel. This means that most equipment that connects to those types of jacks on the rear jackpack, may be connect-ed to the front connection panel. To use the side jacks as the signal source, select them using Main Input menu as described on page 25.
Remote Control Key Functions - When using the Remote Control, aim it at the remote control sensor on the TV. MODE Select the remote oper ting mode: TV, VCR, Cable, DVD and SatelliteSelect other operating modes, for theremote to control external devices. INPUT Selects: Antenna, Cable, AV1, AV2, Component1-2, RGB and HDMI/DVI input sources. NUMBER KEYPAD For direct channel selection and programming functions. MUTE Switches the sound on or off.(Refer to p.
Remote Control Key Functions RGB-PC Selects the RGB-PC input mode. In other input sources, change to theRGBPC mode. VCR CABLE DVD SAT TV MODE TIMER Lets you select the amount of timebefore your TV turns itself off automatically. SAP Selects MTS sound: Mono, Stereo, and SAP in Analog mode. Change the audio language in DTV mode. LIGHT POWER INPUT TV INPUT INFO RGB-PC TIMER HDMI/DVI 2 3 4 5 6 7 8 9 0 FLASHBK FAV + SAP RATIO FLASHBK Tunes to the last channel viewed.
External Equipment Connections - Here shown may be somewhat different from your TV. 1. Analog and Digital TV signals provided on antenna - Wall Antenna Socket or Outdoor Antenna without a Cable Box Connections - For optimum picture quality, adjust antenna direction if needed. Multi-family Dwellings/Apartments (Connect to wall antenna socket) Wall Antenna Socket ANTENNA IN Bronze Wire RF Coaxial Wire (75 ohm) VHF Antenna Turn clockwise to tighten.
3. Analog and Digital TV signals provided on cable and antenna Antenna Bronze Wire RF Coaxial Wire (75 ohm) Cable TV Wall Jack CABLE IN Turn clockwise to tighten. ANTENNA IN RF Coaxial Wire (75 ohm) Bronze Wire • To improve the picture quality in a poor signal area, please purchase a signal amplifier and install properly. • If the antenna needs to be split for two TV’s, install a “2Way Signal Splitter” in the connections.
External A/V Source Setup How to connect Connect the audio and video cables from the external equipment's output jacks to the TV input jacks, as shown in the figure. When connecting the TV to external equipment, match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red). AV IN 1 Camcorder AV OUT VIDEO (L) MONO (R) How to use (L) AUDIO Video Game Set (R) 1. Select the input source by using the INPUT button on the Remote Control.
HDSTB Setup - This TV can receive Digital Over-the-air/Cable signals without an external digital set-top box. However, if you do receive Digital signals from a digital set-top box or other digital external device, refer to the figure as shown below. - This TV supports HDCP (High-bandwidth Digital Contents Protection) protocol for Digital Contents (480p,720p,1080i). How to connect Use the TV’s COMPONENT (Y, PB, PR) INPUT, RGB, HDMI/DVI jack for video connections, depending on your set-top box connector.
Digital Audio Output Send the TV’s audio to external audio equipment (stereo system) via the Digital Audio Output (Optical) port. How to connect 1. Connect one end of an optical cable to the TV Digital Audio (Optical) Out port. 2. Connect the other end of the optical cable to the digital audio (optical) input on the audio equipment. 3. Set the “ TV Speaker option - Off” in the AUDIO menu. Refer to page 34. See the external audio equipment instruction manual for operation.
PC Setup - This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings. - The TV perceives 640x480, 60Hz as DTV 480p based on the PC graphic card, change the screen scanning rate for the graphic card accordingly. When supporting RGB How to connect 1. Connect the PC to RGB INPUT port of this TV with a RGB cable. 2.
Notes: - Depending on the graphics card, DOS mode may not work if a HDMI1 to DVI Cable is in use. - When Source Devices connected with HDMI/DVI Input, output PC Resolution(VGA, SVGA, XGA), Position and Size may not fit to Screen. As shown the picture below, press the ADJUST button to adjust the screen Position of TV SET and contact an PC graphics card service center.
Screen Setup for PC mode Operation • • • • When RGB connect to PC input and select the RGB-PC in Main Input, this function is used. In RGB-PC mode, POSITION, SIZE, PHASE, RESET is available. In RGB-DTV mode, SIZE, PHASE is not available. In HDMI/DVI mode, POSITION, SIZE, RESET is available (When PC format is inputted) or any function is not available (When DTV format is inputted).
Operation Turning the TV On * In this manual, the OSD (On Screen Display) may be different from your TV’s because it is just an example to help you with the TV operation. Turning on the TV just after installation 1. Connect power cord correctly. At this moment, the TV is switched to standby mode. 2. Press the POWER or CH (D / E) buttons on the TV front panel or press the POWER, INPUT, TV INPUT, CH (+ / -) or Number (0 ~ 9) buttons on the Remote Control to turn the TV on.
TV Setup On-screen Menus Language Selection - The menus can be shown on the screen in the selected language. First select your language. Aspect Ratio Aspect Ratio Caption/Text Caption/Text Caption Option Caption Option Language Language Low Power Low Power D / 2. Press the E button to select Language. G button and then use D / English Español (Spanish) Français (French) button to select the OPTION menu. 1. Press the MENU button and then use E G 3.
Setup Menu Options EZ Scan (Channel Search) - Automatically finds all available channels through antenna or cable inputs, and stores them in memory on the channel list. - Run EZ Scan again after any Antenna/Cable connection changes. EZ Scan EZ Scan Manual Scan Manual Scan Channel Edit Channel Edit DTV Signal DTV Signal G Selection ( G or ) leads you to the EZ scan screen. Input Input Input Label Input Label Processing EZ scan... ANTENNA Ch.
Channel Edit Create two different types of channel lists in memory: “Custom List” and “Favorite List” from the default channel list created from the EZ Scan channel search. A Custom List can be created by toggling each channel on or off with ENTER button. The channels in the Custom List are displayed in black color, and the channels deleted from the Custom List are displayed in gray color.
Input Source Selection Changes the picture source so you can watch your off-air TV, cable TV, VCR, DVD, or any other devices that are connected to your TV. EZ Scan EZ Scan Manual Scan Manual Scan Channel Edit Channel Edit DTV Signal DTV Signal Input Input G Input Label Input Label 1. Press the MENU button and then use 2. Press the G button and then use D /E D /E Antenna Cable AV1 AV2 Component1 Component2 RGB-PC HDMI/DVI button to select the SETUP menu. button to select Input . 3.
V ideo Menu Options Auto Picture Control (EZ Picture) EZ Picture adjusts the TV for the best picture appearance. Select the preset value in the EZ Picture menu based on the program category. Daylight, Normal, Night Time settings are preset for optimum picture quality at the factory and are not adjustable. In the User 1, and User 2 modes only, user can directly adjust the contrast, brightness, color, sharpness, tint. 1.
Color Temperature Control Choose one of three automatic color adjustments. Set to warm to enhance hotter colors such as red, or set to cool to see less intense colors with more blue. EZ Picture EZ Picture Color Temperature Color Temperature G Cool XD XD Medium Advanced Advanced Warm Video Reset Video Reset User 1. Press the MENU button and then use 2. Press the G button and then use D /E D /E 3. Press the G button and then use D /E button to select the VIDEO menu.
V ideo Menu Options Manual Color Temperature Control You can also adjust the detailed settings(Red, Green, Blue) by selecting the User menu. EZ Picture EZ Picture Color Temperature Color Temperature Cool XD XD Medium Advanced Advanced Warm Video Reset Video Reset User G Selection ( G or ) leads you to the detailed setting screen. Red User 0 E Red 0 Green 0 Blue 0 Press 1. Press the MENU button and then use 2. Press the G button and then use D /E D /E MENU to confirm.
XD XD is LG Electronic’s unique picture improving technology to display a real HD source through an advanced dig-ital signal processing algorithm. When selecting EZ Picture options (Daylight, Normal and Night time), XD is automatically change to Auto. When selecting EZ Picture options (User 1 and User 2), you can choose the Auto / Manual and when selecting Manual, you can adjust the XD Contrast, XD color and XD Noise.
Advanced-Cinema 3:2 Mode / Black Level • Cinema 3:2 Mode - Set up the TV for the best picture appearance for viewing movies. When you operate Cinema (3:2 Pull-Down Mode or Cinema Correction Mode),the TV will adjust 24 fps video from movies to 30 fps video for display (This function is only available in Analog,AV1,AV2,Component 480i mode.) • Black level - Adjusting the contrast and the brightness of the screen using the black level of the screen. This feature operates only in HDMI/DVI or AV1, AV2 mode.
V ideo Reset Use to quickly reset all the Video menu options to their original factory preset values. EZ Picture EZ Picture Color Temperature Color Temperature XD XD Advanced Advanced Video Reset Video Reset 1. Press the MENU button and then use D /E Selection ( G or ) resets to the factory settings (default). button to select the VIDEO menu. 2. Press the G button and then use 3. Press the G button to reset the Video menu options to original values.
Audio Menu Options Audio Language Other languages may be available if a digital signal is provided by the broadcasting station. Audio Language Audio Language EZ SoundRite EZ SoundRite EZ Sound EZ Sound Balance Balance TV Speaker TV Speaker 1. Press the MENU button and then use D G English Spanish French button to select the AUDIO menu. /E 2. Press the G button and then use D /E button to select Audio Language. 3.
Auto Sound Control (EZ Sound) EZ Sound lets you enjoy the best sound without any special adjustment because the TV sets the appropriate sound options based on the program content. Normal,Stadium,News,Music and Theater are preset for good sound quality at the factory and are not adjustable. 1. Press the EZ SOUND button repeatedly to select the appropriate sound setup as shown below : Normal, Stadum, News, Music, Theater and User (your own settings). • You can also adjust EZ Sound in the AUDIO menu. 2.
Balance Adjust the left/right sound of speaker to suit your taste and room situations. Audio Language Audio Language EZ SoundRite EZ SoundRite EZ Sound EZ Sound Balance Balance TV Speaker TV Speaker 1. Press the MENU button and then use the AUDIO menu. 2. Press the G button and then use D /E D / E 0 L R 0 L R button to select button to select Balance. Balance 3. Press the G button and then use F priate adjustments. /G button to make appro- 4.
T ime Menu Options Auto Clock Setup The time is set automatically from a digital channel signal. The digital channel signal includes information for the current time provided by the broadcasting station. Set the clock manually, if the current time is set incorrectly by the auto clock function through Digital Channel Service problem. Auto Clock Auto Clock Manual Clock Manual Clock Off Timer Off Timer On Timer On Timer Sleep Timer Sleep Timer Auto Off Auto Off 1.
On/Off On/Off Timer Setup Timer function operates only if current time has been set. Off-Timer function overrides On-Timer function if they are both set to the same time. The TV must be in standby mode for the On-Timer to work. If you do not press any button within 2 hours after the TV turns on with the On Timer function, the TV will automatically revert to standby mode.
Auto Off Off If set to on and there is no input signal, the TV turns off automatically after 10 minutes. Auto Clock Auto Clock Manual Clock Manual Clock Off Timer Off Timer On Timer On Timer Sleep Timer Sleep Timer Auto Off Auto Off TV will be automatically turned off, in case of No Signal for 10 minutes. G Off On 1. Press the MENU button and then use D / E button to select the TIME menu. 2. Press the G button and then use D / E button to select Auto Off. 3.
Option Menu Features Aspect Ratio Control This feature lets you choose the way an analog picture with a 4:3 aspect ratio is displayed on your TV. When you receive an analog picture with a 4:3 aspect ratio on your 16:9 TV,you need to specify the pic ture is to be displayed. RGB-PC/DVI-PC input source use 4:3 or 16:9 aspect ratio. 1. Press the RATIO button repeatedly to select the desired picture format. • You can also adjust the Aspect Ratio in the OPTION menu.
Caption/Text Caption/Text Analog Broadcasting System Captions Select a caption mode for displaying captioning information if provided on a program. Analog caption displays information at any position on the screen usually the program's dialog. Text displays information, usually at the bottom position and is used for a data service, generally not program related. Caption/Text, if provided by the broadcaster, would be available for both digital and analog channels on the Antenna/Cable.
Caption Option Customize the DTV/CADTV captions that appear on your screen. Aspect Ratio Aspect Ratio Caption/Text Caption/Text Caption Option Caption Option Language Language Low Power Low Power 1. Press the MENU button and then use 2. Press the G button and then use D 3.
Lock Menu Options Parental Control can be used to block specific channels, ratings and other viewing sources. The Parental Control Function (V-Chip) is used to block program viewing based on the ratings sent by the broadcasting station. The default setting is to allow all programs to be viewed. Viewing can be blocked by the type of program and by the categories chosen to be blocked. It is also possible to block all program viewing for a time period. To use this function, the following must be done : 1.
Parental Lock Setup Set up blocking schemes to block specific channels, ratings, and external viewing sources. A password is required to gain access to this menu. Lock System Set Password Block Channel TV Rating-English TV Rating-French Input Block 1. Press the MENU button and then use D / E button to select the button. • Enter the password as requested. • The TV is set up with the initial password “0-0-0-0”.
Split Zoom (DTV 720p, or 1080i mode only) - Enlarges the picture with correct proportions. - When enlarging the picture, the image may become distorted. 1. Press the FREEZE button in DTV 720p, or 1080i modes. 2. Use the buttons to select the screen split zoom section. D /E /F /G 3. To return to normal viewing, press the FREEZE button again. EPG (Electronic Program Guide) (In DTV mode) - This system has an Electronic Program Guide (EPG) to help your navigate through all the possible viewing options.
Brief Info. Function : • Show the present screen information. • On Watching with the upper Input signal, press the INFO button. • Press the INFO button or EXIT button to exit. . A: Banner information B: Program title C: Day, Month, Year D: Program start time E: Program finish time F: Show the prosessing rate G: Present time H: Added information. Refer to the icon explanation.
Programming the Remote The Remote Control for your HD receiver is a multi-brand or universal Remote Control that can be programmed to operate most remote-controllable devices of other manufacturers. Note: The Remote Control may not be able to control all models of other brands. 1. Test your Remote Control.
Programming Codes TVs Brand Codes Brand Codes Codes Brand A MARK 112 143 GOLDSTAR 004 102 106 019 024 040 Sharp ADMIRAL 072 081 161 110 112 113 056 130 132 022 028 029 AKAI 006 146 116 119 122 134 081 143 170 AMPRO 073 167 127 137 143 NIKEI 043 AMSTRAD 052 HALL MARK 004 116 ONKING 043 SIEMENS 088 043 054 056 HITACHI 072 ANAM AOC 004 006 009 ONWA 043 SIGNATURE 010 011 012 OPTONICA 019 081 SONY 112 115 118 023 041 075 PANASONIC 034 056 080 121 131 143 158 1
SAT SAT Brand ALPHASTAR DSR AMPLICA BIRDVIEW BSR CAPETRONICS CHANNEL MASTER CHAPARRAL CITOH CURTIS MATHES DRAKE DX ANTENNA ECHOSTAR ELECTRO HOME EUROPLUS FUJITSU Codes 123 050 051 126 053 053 013 014 018 036 008 009 077 054 050 145 005 006 010 011 112 116 024 046 076 038 040 058 093 095 096 098 099 122 089 114 017 021 027 133 129 015 055 012 007 052 141 056 057 094 097 100 Brand Codes GENERAL INSTRUMENT 003 004 029 031 101 HITACHI 139 140 HOUSTON TRACKER 033 037 051 057 HUGHES 068 HYTEK 053 JANIEL 06
DVD Brand APEX DIGITAL DENON GE GOLDSTAR HARMAN KARDON JVC LG Codes Brand 022 020 014 MAGNAVOX 005 006 MARANTZ 010 016 025 MITSUBISHI 027 NAD 012 ONKYO 001 010 016 PANASONIC 48 DLP Projection TV Codes 025 013 024 002 023 008 017 003 009 Brand PHILIPS PIONEER PROCEED PROSCAN RCA SAMSUNG SONY Codes 013 004 026 021 005 006 005 006 011 015 007 Brand THOMPSON TOSHIBA YAMAHA ZENITH Codes 005 006 019 008 009 018 010 016 025
Troubleshooting Checklist • Check whether the TV is turned on. No picture & No sound • Is the power cord inserted into wall power outlet? ; Is the power cord connected to the TV set properly? • Test the wall power outlet, plug another product’s power cord into the outlet where the TV’s power cord was plugged in. Picture OK & No sound • Press the VOLUME (D / E) button. • Sound muted? Press MUTE button. • Check to see if there is any object between the TV and the remote control causing obstruction.
No output from one of the speakers • Adjust Balance in the AUDIO menu. (Refer to p.34) Unusual sound from inside the TV • A change in ambient humidity or temperature may result in the unit turning off and does not indicate a fault with the TV. Poor TV input signal • Check ANTENNA and CABLE connection. Poor Video signal • Check ANTENNA and CABLE connection. No channel or a few channel Unsuitable Aspect Ratio 50 DLP Projection TV • Start EZ Scan.
Maintenance - Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you will have your new TV. Be sure to turn the power off and unplug the power cord before you begin any cleaning. Cleaning the Screen 1. Here’s a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until it’s almost dry, and then use it to wipe the screen. 2.