LCD TV MODELS 32LB9D* 42LB9DF* 47LB9DF* 52LB9DF* DVB is a registered trademark of the DVB Project I D N u m b e r : 4757: 32LB9D 4756: 42LB9DF 4755: 47LB9DF 4754: 52LB9DF 4709: 50PY3DF 4708: 60PY3DF 4836: 42PB4D 4837: 50PB4D O N L Y :42LB9DF 47LB9DF 52LB9DF 50PY3DF 60PY3DF PLASMA TV MODELS 50PY3DF* 60PY3DF* 42PB4D* 50PB4D*
Ensure that the following accessories are included with your product. If an accessory is missing, please contact the dealer where you purchased the product. INPUT D/A POWER MODE TV INPUT VCR BRIGHT ACCESSORIES ACCESSORIES DVD SIMPLINK RATIO TEXT INFO i GUIDE SUBTITLE MENU EXIT MARK OK 1.5V 1.5V Q.
CONTENTS CONTENTS ACCESSORIES ........................................... 1 PREPARATION Front Panel Controls . . . . . . . . . . . . . . . . . . . . . . 4 Back Panel Information . . . . . . . . . . . . . . . . . . . . 6 Stand Installation . . . . . . . . . . . . . . . . . . . . . . . . . 9 Attaching the TV to a Desk . . . . . . . . . . . . . . . . 10 Swivel Stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Attaching the TV to a Wall . . . . . . . . . . . . . . . . .
Auto Volume Leveler ( Auto Volume) . . . . . . . . . 78 Preset Sound Settings- Sound Mode . . . . . . . . 79 Sound Setting Adjustment - User Mode . . . . . . . . 80 Balance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82 TV Speakers On/ Off Setup . . . . . . . . . . . . . . . . 83 I/II - Stereo/Dual Reception . . . . . . . . . . . . . . . . . 84 - Speaker Sound Output Selection . . . . . . . . 84 Subtitle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PREPARATION FRONT PANEL CONTROLS PREPARATION ■ ■ This is a simplified representation of the front panel. Image shown may be somewhat different from your TV. If your product has a protection film attached, remove the film and then wipe the product with a polishing cloth. 50/60PY3DF* Remote Control Sensor Program Display Touch Pad INPUT MENU OK VOL PR OK Power Standby Indicator • illuminates red in standby mode. • illuminates white when the set is switched on.
PREPARATION 42/50PB4D* Remote Control Sensor Power/Standby Indicator • illuminates red in standby mode. • illuminates green when the set is switched on.
PREPARATION BACK PANEL INFORMATION PREPARATION ■ Image shown may be somewhat different from your TV. Plasma TV Models 50/60PY3DF* AV V IN 2 AV IN 2 USB USB USB port S-VIDEO S-VIDEO L/MONO AUDIOR R VIDEO L/MONO L/ MONO VIDEO AUDIO S-VIDEO Input Connect S-Video out from an S-VIDEO device. AUDIO/VIDEO Input Connect audio/video output from an external device to these jacks.
3 5 4 6 ANTENNA IN RGB IN HDMI/DVI IN RGB (PC) PREPARATION 2 1 DIGITAL AUDIO OUT AUDIO (RGB/DVI) REMOTE CONTROL IN OPTICAL PTICAL VIDEO AV OUT 3 RS-232C IN (CONTROL & SERVICE) COMPONENT IN 2 1 VIDEO AUDIO VIDEO (MONO) AUDIO 7 8 2 RGB/AUDIO IN Connect the output from a set top box or PC to the appropriate input port. 3 4 5 6 ANTENNA IN Connect antenna signals to this jack. COMPONENT IN Connect a component video/audio device to these jacks.
PREPARATION ■ Image shown may be somewhat different from your TV. LCD TV Models 42/47/52LB9DF* USB IN USB IN PREPARATION 32LB9D* AV IN 2 S-VIDEO Input Connect S-Video out from an S-VIDEO device. VIDEO L/MONO AUDIO R R VIDEO L/MONO AUDIO A USB IN USB IN S-VIDEO L/MONO MONO AUDIO R VIDEO L/ VIDEO L/MONO AUDIO R S-VIDEO USB Input AUDIO/VIDEO Input Connect audio/video output from an external device to these jacks.
STAND INSTALLATION (32LB9D* Only) Carefully place the product screen side down on a cushioned surface that will protect product and screen from damage. 2 Assemble the product stand with the product as shown. 3 Install the 4 bolts securely, in the back of the product in the holes provided.
PREPARATION ATTACHING THE TV TO A DESK (32LB9D* Only) PREPARATION If you wish to attach the TV to a desk, it must be securely fastened to the desk using a metal screw (as shown below). Failure to securely attach the TV may result in the TV falling: which may cause damage to the TV and serious personal injury. Stand 1-screw Desk SWIVEL STAND After installing the TV, you can adjust the the TV set manually to the left or right direction by 20 degrees to suit your viewing position.
ATTACHING THE TV TO A WALL ■ 50PY3DF* 60PY3DF* 1 2 2 42/47/52LB9DF* , 32LB9D* 42/50PB4D* 1 1 PREPARATION This Feature is not available for all models. Set it up close to the wall so the product doesn’t fall over when it is pushed backwards. A The instructions shown below is a safer way to set up the product, which is to fix it on the wall so the product doesn’t fall over when it is pulled in the forward direction. It will prevent the product from falling forward and hurting people.
PREPARATION BACK COVER FOR WIRE ARRANGEMENT ■ Here shown may be somewhat different from your TV. PREPARATION 50/60PY3DF* 1 Hold the CABLE MANAGEMENT with both hands and pull it as shown. 45° CABLE MANAGEMENT 12 2 Connect the cables as necessary. To connect additional equipment, see the External equipment Setup section. 3 Install the CABLE MANAGEMENT as shown.
1 Hold the C A B L E M A N A G E M E N T with hands and push it as shown. PREPARATION 42/50PB4D* CABLE MANAGEMENT 2 Connect the cables as necessary. To connect an additional equipment, see the E x t e r n a l e q u i p m e n t S e t u p section. 3 Reinstall the C A B L E M A N A G E M E N T as shown.
PREPARATION PREPARATION 42/47/52LB9DF* , 32LB9D* 1 Connect the cables as necessary. To connect additional equipment, see the E x t e r n a l E q u i p m e n t S e t u p section. 2 Install the C A B L E M A N A G E M E N T as shown. (Insert it as pushing the loops on the both sides of the cable management.) (This Feature is not available for all models.) CABLE MANAGEMENT 3 Bundle the cables using the supplied twist holder. (This Feature is not available for all models.
GROUNDING Ensure that you connect the earth ground wire to prevent possible electric shock. If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to ground the unit by connecting it to telephone wires, lightening rods, or gas pipes. Power Supply PREPARATION Short-circuit Breaker DESKTOP PEDESTAL INSTALLATION For proper ventilation, allow a clearance of 4inches on all four sides from the wall.
PREPARATION NOT USING THE DESK-TYPE STAND(Only 50/60PY3DF* model) PREPARATION ■ It is applied to when installing only the 60PY3DF* model as wall-type. When not using the desk-type stand, install the supplied desk-type stand fixture protection rubber caps as shown at the figure. RUBBER ■ It is applied to when installing only the 50/60PY3DF* model as wall-type.
■ To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment. ANTENNA CONNECTION VIDEO L/MONO AUDIO R S-VIDEO USB IN L/MONO AUDIO R USB VIDEO L/MONO AUDIO R AV IN 2 VIDEO USB S-VIDEO PREPARATION AV IN 2 Wall Antenna Socket or Outdoor Antenna without a Cable Box Connections. For optimum picture quality, adjust antenna direction if needed.
EXTERNAL EQUIPMENT SETUP ■ ■ To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment. This part of EXTERNAL EQUIPMENT SETUP mainly use pictures for the LCD TV models. HD RECEIVER SETUP RGB IN When connecting with a Component cables EXTERNAL EQUIPMENT SETUP 1 RGB (PC) COMPONENT IN Connect the video outputs (Y, PB, PR) of the digital set top box to the COMPONENT IN VIDEO 1 jacks on the set. Match the jack colours.
AUDIO (RGB/DVI) DIGITAL AUDIO OUT When connecting with HDMI cable 1 Connect the digital set-top box to H D M I / D V I I N 1, 2 or 3 jack on the set. 2 No separate audio connection is necessary. RGB IN HDMI/DVI IN RGB (PC) AUDIO (RGB/DVI) 3 AUDIO COMPONENT IN 2 3 4 Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.) 1 VIDEO Select HDMI1, HDMI2 or HDMI3 input source using the INPUT button on the remote control.
EXTERNAL EQUIPMENT SETUP When connecting HDMI to DVI cable EXTERNAL EQUIPMENT SETUP RGB (PC) AUDIO (RGB/DVI) REMOTE CONTROL IN DIGITAL AUDIO OUT OPTICAL VIDEO AV OUT 3 RS-232C IN (CONTROL & SERVICE) COMPONENT IN 2 VIDEO DVI-DTV OUTPUT AUDIO S-VIDEO VIDEO (MONO) AUDIO AV IN 1 AUDIO 1 2 1 20 ANTENNA IN RGB IN HDMI/DVI IN L R 1 Connect the DVI output of the digital set-top box to the H D M I / D V I I N 1, 2 or 3 jack on the set.
DVD SETUP RGB IN DIGI AUDIO RGB (PC) When connecting Component cables 1 (C 2 Connect the audio outputs of the DVD to the C O M P ON E N T I N A U D I O 1 jacks on the set. 3 Turn on the DVD player, insert a DVD. 4 Select C o m p o n e n t 1 input source using the INPUT button on the remote control. If connected to C O M P O N E N T I N 2 input, select C o m p o n e n t 2 input source. 5 Refer to the DVD player's manual for operating instructions.
HDMI/DVI IN RGB IN DIGITAL AUDIO OUT RGB (PC) EXTERNAL EQUIPMENT SETUP COMPONENT IN When connecting with an S-Video cable 2 1 Connect the1S-VIDEO output of the DVD to the S-VIDEO (DVI) input on the set. VIDEO AUDIO EXTERNAL EQUIPMENT SETUP 2 Connect the audio outputs of the DVD to the AUDIO input jacks on the set. 3 Turn on the DVD player, insert a DVD. 4 Select A V 1 input source using the I N P U T button on the remote control. If connected to A V I N 2 input, select A V 2 input source.
COMPONENT IN 1 (DVI) VIDEO AUDIO VIDEO ( ) AUDIO AV IN 1 2 VCR SETUP ■ ■ To avoid picture noise (interference), leave an adequate distance between the VCR and TV. If the 4:3 picture format is used; the fixed images on the sides of the screen may remain visible on the screen. This phenomenon is common to all manufacturers and in consequence the manufacturer’s warranty does not cover the product bearing this phenomenon.
HDMI/DVI IN RGB IN DIGITAL AUDIO OUT RGB (PC) EXTERNAL EQUIPMENT SETUP COMPONENT IN 2 AV IN 1 AUDIO When connecting with an RCA cable 1 (DVI) VIDEO 1 S-VIDEO VIDEO (MONO) AUDIO VIDEO jacks between TV and Connect the AUDIO/V VCR. Match the jack colours(Video = yellow, Audio Left = white, and Audio Right = red) EXTERNAL EQUIPMENT SETUP 2 Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.
OTHER A/V SOURCE SETUP 32 inches USB IN R VIDEO L/MONO AUDIO A R VIDEO L/MONO AUDIO A S-VIDEO 1 AV IN 2 1 AV IN 2 Camcorder Camcorder VIDEO L R VIDEO Video Game Set 1 L EXTERNAL EQUIPMENT SETUP USB IN 42/47/50/52/60 inches R Video Game Set VIDEO jacks between TV and Connect the AUDIO/V external equipment. Match the jack colours.(Video = yellow, Audio Left = white, and Audio Right = red) 2 Select A V 2 input source using the INPUT button on the remote control.
EXTERNAL EQUIPMENT SETUP PC SETUP This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings. The TV perceives 1024x768, 60Hz as DTV 720p based on the PC graphic card. If necessary, change the screen scanning rate for the graphic card accordingly. EXTERNAL EQUIPMENT SETUP When connecting D-sub 15pin cable RGB IN AUDIO (RGB/DVI) 1 DIGITAL Connect theAUDIO RGB output of the PC to the R G B OUT (P C ) jack on the set.
When connecting HDMI to DVI cable RGB (PC) AUDIO (RGB/DVI) REMOTE CONTROL IN DIGITAL AUDIO OUT OPTICAL VIDEO AV OUT 3 RS-232C IN (CONTROL & SERVICE) COMPONENT IN 2 VIDEO 1 DVI-PC OUTPUT AUDIO S-VIDEO VIDEO (MONO) AUDIO AV IN 1 AUDIO 1 EXTERNAL EQUIPMENT SETUP ANTENNA IN RGB IN HDMI/DVI IN 2 L R 1 Connect the DVI output of the PC to the H D M I / D V I I N1 , 2 or 3 jack on the set. (Use the HDMI to DVI cable) 2 Connect the PC audio output to the AUDIO (RGB/DVI) jack on the set.
EXTERNAL EQUIPMENT SETUP Supported Display Specifications (RGB/HDMI-PC) Supported Display Specifications (HDMI-DTV) EXTERNAL EQUIPMENT SETUP Resolution Horizontal Frequency(kHz) Vertical Frequency(Hz) Resolution Horizontal Frequency(kHz) Vertical Frequency(Hz) 640x480 31.469 37.500 59.940 75.000 720x576p 31.25 50.00 720x480p 31.47 31.50 59.94 60.00 720x400 31.469 70.08 800x600 37.879 46.875 60.317 75.000 1280x720p 37.50 44.96 45.00 50.00 59.94 60.00 1024x768 48.363 56.476 60.
Screen Setup for PC mode Overview When you change the resolution, select the proper resolution in present input to see the best picture appearance. Picture Mode : User1 Colour Temperature 1 Press the M E N U button and then use D or E button to select the PICTURE menu. : Cool XD Advanced Aspect Ratio : 16:9 Picture Reset Screen 2 Press the G button and then use D or E button to select Screen. 3 Press the G button to enter the screen adjustment menu.
EXTERNAL EQUIPMENT SETUP Adjustment for screen Resolution, Position, Clock, Phase, Reset 1 EXTERNAL EQUIPMENT SETUP Use D or E button to select R e s o l u t i o n, Position, Clock, or Phase. Resolution Position G Clock 2 3 Press the O K button and then use D or E or F or G button to make appropriate adjustments. ■ The P h a s e adjustment range is -16 ~ +16. ■ The C l o c k adjustment range is -30 ~ +30. Press the O K button.
USB IN SETUP USB IN USB IN 1 S-VIDEO S-VIDEO L/ MONO L/MONO VIDEO L/MONO AUDIO RAUDIO R VIDEO USB IN USB IN VIDEO L/MONO AUDIO MONO RAUDIO R VIDEO L/MONO 42/47/50/52/60 inches AV V IN 2 AV IN 2 1 EXTERNAL EQUIPMENT SETUP 32 inches AV V IN 2 AV IN 2 i 1 Connect the USB device to the U S B I N jacks on the side of TV. 2 After connecting the U S B I N jacks, you use the function. (G p .
EXTERNAL EQUIPMENT SETUP AV OUTPUT SETUP The TV has a special signal output capability which allows you to hook up a second TV or monitor. RGB IN DIGITAL AUDIO OUT RGB (PC) 1 Connect the second TV or monitor to the TV’s AV OUT jacks. OPTICAL VIDEO RS-232C IN TROL & SERVICE) COMPONENT IN 2 AUDIO 2 See the Operating Manual of the second TV or monitor 1 (DVI) for further details regarding that device’s input settings.
DIGITAL AUDIO OUTPUT SETUP Send the TV’s audio to external audio equipment via the Digital Audio Output (Optical) port. REMOTE CONTROL IN DIGITAL AUDIO OUT OPTICAL PTICAL VIDEO AV OUT Connect one end of an optical cable to the TV Digital Audio (Optical) Output port. RS-232C IN (CONTROL & SERVICE) COMPONENT IN 2 2 Connect the other end of the optical cable to the digital audio (optical) input on the audio equipment.
WATCHING TV /PROGRAMME CONTROL REMOTE CONTROL KEY FUNCTIONS When using the remote control, aim it at the remote control sensor on the TV. D/A INPUT Selects digital or analogue mode. (Digital TV / Analogue TV) INPUT D/A POWER MODE TV INPUT WATCHING TV/PROGRAMME CONTROL INPUT External input modes rotate in regular sequence: Digital, Analogue, AV1-2, Component 1-2, RGB-PC, HDMI1, HDMI2, HDMI3. POWER Switches the set between ON and STANDBY. SIMPLINK See a list of AV devices connected to TV.
TV, VCR, DVD Select the remote operating mode: TV, VCR, DVD. Select other operating modes, for the remote to operate external devices. RATIO Selects your desired picture format. WATCHING TV/PROGRAMME CONTROL INFOoo i Shows the present screen information. GUIDE Shows a programme schedule. Coloured They are used as per the indications or functions displayed on the TV screen in the case of Button Text displays (Teletext, EPG) and programme edit. EXIT Returns to TV viewing from any menu. MENU Selects a menu.
WATCHING TV/PROGRAMME CONTROL TURNING ON THE TV INPUT D/A MODE TV POWER INPUT VCR BRIGHT If your TV will be turned on, you will be able to use its features. DVD SIMPLINK RATIO TEXT Ensure the power cord is connected correctly. When connected to power the TV switches to standby mode. ■ In standby mode, press the , INPUT, P R D or E button on the TV or press the POWER, INPUT, D/A INPUT, PR + or -, Number (0~9 9 ) button on the remote control.
PROGRAMME SELECTION Q.VIEW VOL Automatically finds all programmes available through antenna inputs, and stores them in memory on the programme list. PAGE MUTE 1 2 3 4 5 6 7 8 9 LIST 0 FAV SIZE INDEX TIME ? I/II REVEAL USB SLEEP VOLUME ADJUSTMENT INPUT D/A MODE TV POWER INPUT VCR BRIGHT Adjust the volume to suit your personal preference. DVD SIMPLINK RATIO TEXT 1 Press the V O L + or - button to adjust the volume.
WATCHING TV/PROGRAMME CONTROL ON SCREEN MENUS SELECTION AND ADJUSTMENT Your TV's OSD (On Screen Display) may differ slightly from what is shown in this manual. WATCHING TV/PROGRAMME CONTROL 1 Press the M E N U button and then use D or E button to select each menu. 2 Press the G button and then use D or E or F or G button to display the available menus.
POWER FACTORY RESET Use to quickly reset all the menu options to their original factory preset values. This function deletes all TV programmes. To begin Factory Reset, input a 4-digit password in Lock system. Be sure to remember this number! 7 ’, ‘7 7 ’, ‘7 7 ’, ‘7 7 ’ on the If you forgot your password, press ‘7 remote control handset.
WATCHING TV/PROGRAMME CONTROL POWER AUTO PROGRAMME TUNING WATCHING TV/PROGRAMME CONTROL A password is required to gain access to Auto programme or Manual programme menu if the Lock system is turned on. If you forgot your password, press ‘7’, ‘7’, ‘7’, ‘7’ on the remote control. In Australia, if no station name can be assigned to a station, the programme number is assigned and stored as ----- followed by a number see ‘Assigning a station name’ section to assign the station name.
5 Programme Edit Option F Press Press the O K button to begin auto programming. All of analogue programmes are deleted and all analogue stations are stored. 7 TV G Option: Select TV/DTV(analogue and digital), TV(analogue only) or DTV(digital only) to search. Press the F or G button to select Y e s . 6 To Start Manual Tuning Auto Tuning Manual Tuning Programme Edit To stop auto tuning, press the O K button. When auto tuning is completed, the P r o g r a m m e E d i t menu appears on the screen.
WATCHING TV/PROGRAMME CONTROL MANUAL PROGRAMME TUNING INPUT D/A POWER MODE TV POWER INPUT VCR BRIGHT In Digital Mode DVD SIMPLINK RATIO TEXT INFO i GUIDE Manual programme lets you manually add a programme to your programme list. MENU SUBTITLE WATCHING TV/PROGRAMME CONTROL EXIT MARK OK Auto Tuning 1 Press the M E N U button and then use D or E button to select the S E T U P menu. 2 Press the G button and then use D or E button to select M a n u a l T u n i n g.
MANUAL PROGRAMME TUNING Continued INPUT D/A POWER MODE TV POWER INPUT VCR BRIGHT In Analogue Mode DVD SIMPLINK RATIO TEXT INFO i GUIDE Manual programme lets you manually tune and arrange the stations in whatever order you desire. Also you can assign a station name with five characters to each programme number. MENU SUBTITLE 1 Press the M E N U button and then use D or E button to select the SETUP menu. 2 Press the G button and then use D or E button to select M a n u a l T u n i n g.
WATCHING TV/PROGRAMME CONTROL FINE TUNING - In Analogue Mode only INPUT D/A POWER MODE TV POWER INPUT VCR BRIGHT Normally fine tuning is only necessary if reception is poor. The finely tuned programme will be indicated by a yellow number during programme selection. DVD SIMPLINK RATIO TEXT INFO i MENU GUIDE SUBTITLE WATCHING TV/PROGRAMME CONTROL EXIT MARK OK 1 Press the M E N U button and then use to select the S E T U P menu.
ASSIGNING A STATION NAME - In Analogue Mode only INPUT D/A POWER MODE TV POWER INPUT VCR BRIGHT You can assign a station name with the characters to each programme number. DVD SIMPLINK RATIO TEXT INFO i MENU GUIDE SUBTITLE WATCHING TV/PROGRAMME CONTROL EXIT MARK OK Auto Tuning 1 Press the M E N U button and then use D or E button to select the SETUP menu. 2 Press the G button and then use D or E button to select Manual Tuning.
WATCHING TV/PROGRAMME CONTROL PROGRAMME EDIT INPUT D/A MODE TV POWER INPUT VCR BRIGHT This function enables you to delete or skip the stored programmes. Also you can move some stations to other programme numbers or copy blank station data into the selected programme number. DVD SIMPLINK RATIO TEXT INFO i MENU GUIDE SUBTITLE WATCHING TV/PROGRAMME CONTROL EXIT MARK OK Auto Tuning 1 Press the M E N U button and then use D or E button to select the S E T U P menu.
INPUT D/A MODE TV POWER INPUT VCR BRIGHT DVD SIMPLINK Skipping a programme number a. Select a programme number to be skipped with D or E or F or G button. b. Press the B L U E button. The skipped programme number turns to blue. c. Press the B L U E button again to release the skipped programme. When a programme number is skipped it means that you will be unable to select it using the P R + or - button during normal TV viewing.
WATCHING TV/PROGRAMME CONTROL INPUT LIST INPUT D/A MODE TV POWER INPUT VCR BRIGHT DVD AV2 RATIO TEXT INFO ! Press the INPUT button to display external device that is connected to the unit, on screen. Press the O K button to change the input to the active external device. Use the INPUT button to select the input source.
CALLING UP THE CHANNEL LIST INPUT D/A MODE TV POWER INPUT VCR BRIGHT You can check the programmes stored in the memory by displaying the channel list. 1 DVD SIMPLINK DIGITAL ABC TV Sydney RATIO TEXT INFO i GUIDE Channel List 1 Displaying Channel list 10 11 SUBTITLE MENU 13 MARK EXIT E ■ Press the L I S T button to display the Channel List menu. The Channel list appears on the screen. OK Q.VIEW PR VOL ! NOTE G G You may find some gray programmes.
WATCHING TV/PROGRAMME CONTROL INPUT SOURCE SELECTION INPUT D/A MODE TV POWER INPUT VCR BRIGHT Alternatively you can select the Digital, Analogue, AV1-2, Component 1-2, RGB-PC, HDMI1/2/3 mode by pressing the INPUT button. Press the D/A INPUT button to select digital or analogue mode. DVD SIMPLINK RATIO TEXT INFO i MENU SUBTITLE WATCHING TV/PROGRAMME CONTROL MARK EXIT OK Q VIEW Subtitle : Off Input Label Press the M E N U button and then use D or E button to select the OPTION menu.
INPUT D/A MODE TV POWER INPUT VCR BRIGHT SIMPLINK DVD RATIO TEXT INFO i GUIDE This operates only for the devices with the SIMPLINK logo. Please check the SIMPLINK logo. SUBTITLE MENU MARK EXIT OK If you do not want SIMPLINK menu, select “Off”. Subtitle : Off Input Label SIMPLINK : Off Key Lock : Off Set ID :1 ISM Method Low Power 1 2 Press the M E N U button and then use D or E button to select the O P T I O N menu. Press the G button and then use D or E button to select SIMPLINK.
WATCHING TV/PROGRAMME CONTROL SIMPLINK Functions Disc playback Control connected AV devices by pressing the D or E or F or G, O K buttons and buttons for play, stop, pause, fast reverse, fast forward, chapter skip.(The button does not provide such functions) Direct Play After connecting AV devices to TV, you can directly control the devices and play media without additional settings. WATCHING TV/PROGRAMME CONTROL Select AV device Enables you to select one of AV devices connected to TV and play it.
KEY LOCK INPUT D/A POWER MODE TV POWER INPUT The TV can be set up so that it can only be used with the remote control. This feature can be used to prevent unauthorized viewing by locking out the front panel controls. This TV is programmed to remember which option it was last set to even if you turn the TV off. VCR BRIGHT RATIO TEXT INFO i SUBTITLE EXIT MARK OK Press the G button and then use D or E button to select Key Lock.
ENTRY MODES When you connect a USB device or press the displayed, automatically. button, this screen is i [X-STUDIO Menu] In USB device, you can not add a new folder or delete the existing folder. X-STUDIO 1 Press the D or E button to select the desired item. 2 Press the O K button to move to Photo List or Music List of USB device. LIST 0 FAV SIZE INDEX TIME ? REVEAL 3 Press the U S BD button of remote control before removing the USB device.
PHOTO LIST It’s available to playback the photo file(*.jpeg/*.jpg) in the USB device. The On Screen Display may be different from your set. Images are an example to assist with the TV operation.
i Photo Selection and PopUp Menu As shown, up to 15 thumbnail photos are listed per page. X-STUDIO 1 Use the P R + or - button to navigate in the thumbnail photo page. 2 Use the M A R K button to mark or unmark a photo. When one or more photos are marked, you can view individual photos or a slide show of the marked photos. If no photos are marked, you can view all photos individually or all photos in the folder in a slide show.
i Set up the menu in Full-Sized Screen You can change the settings to display photos stored on a USB device, on a full-sized screen. Detailed operations are available on full-sized photo view screen. i Use the P R + or - button to navigate the thumbnail photo page. 2 Use D or E or F or G button to navigate the appropriate thumbnail photos, then press the O K button to show the PopUp menu. 3 Use D or E button to Move to the View menu, then press the O K button.
X-STUDIO Option : Set values for Slide Speed and Music folder. Use F or Gbutton to select Option and press O K button. ■ Use F or G button and O K button to set values. Then go to OK and press O K to save the settings. ■ You cannot change M u s i c F o l d e r while BGM is playing. Hide : Hide the menu on the full-sized screen. Use F or G button to select H i d e and press O K button. ■ To see the menu again on the full-sized screen, press O K button to display.
MUSIC LIST Purchased music files(*.MP3) may contain copyright restrictions. Playback of these files may not be supported by this model. Music file on your USB device can be played by this unit. The On Screen Display may be different from your set. Images are an example to assist with the TV operation.
Music Selection and PopUp Menu As shown , up to 8 music titles are listed per page. X-STUDIO 1 Use the P R + or - button to navigate in the music titles page. 2 Use M A R K button to mark or unmark a music. When one or more music files are marked, the marked music will be played in sequence. For example, if you want to listen to only one music repeatedly, just mark the music only and play it. If no music is marked, all the music in the folder will be played in sequence.
4 i Repeatedly, press E X I T button to return to TV viewing or press button to return to the X-STUDIO menu. If you don't press any button for a while during the playing, the play information box (as shown in the below) will float as a screen saver. ■ The ‘Screen Saver’? Screen saver is to prevent screen pixel damage due to an fixed image remaining on the screen for a extended period of time. X-STUDIO ■ ! NOTE When music is playing, is displayed in front of the music title.
EPG(ELECTRONIC PROGRAMME GUIDE) INPUT D/A - In Digital Mode Only MODE TV POWER INPUT VCR BRIGHT SIMPLINK This system has an Electronic Programme Guide (EPG) to help your navigation through all the possible viewing options. The EPG supplies information such as programme listings, start and end times for all available services.
Button Function in NOW/NEXT Guide Mode X-STUDIO Schedule Remote Control Buttons GREEN YELLOW BLUE D/E/F/G EXIT INFO i Function Change to 7Day’s EPG Guide Shows the Schedule list Selects the Radio programmes Select the Broadcasting Programme Switch off EPG The detail information on or off Button Function in 7 Days Guide Mode Sat 30 Jan Schedule Remote Control Buttons GREEN RED YELLOW BLUE D/E/F/G EXIT INFO i Function Change to Now/Next Guide Enter Timer Reservation/Cancel setting mode Shows the Sch
EPG(ELECTRONIC PROGRAMME GUIDE) Button Function in Extended Description Box Digital EPG(ELECTRONIC PROGRAMME GUIDE) Remote Control Buttons Function Change to the selected programme INFO i The detail information on or off Button Function in Reservation Setting Mode Schedule List Programme Start date Remote Control Buttons Function YELLOW Change to Guide PR +/ Page Up/Down Delete the selected item 64 Start time
PICTURE CONTROL PICTURE SIZE(ASPECT RATIO)CONTROL INPUT D/A MODE TV POWER INPUT VCR BRIGHT You can watch TV in various picture formats; Auto, 4:3, 16:9 (Wide), 14:9, Zoom and 1:1 Pixel. DVD SIMPLINK RATIO TEXT INFO i GUIDE ! NOTE G 1 If a fixed image is displayed on the screen for a long time, it image may become imprinted on the screen and remain visible.
PICTURE CONTROL PRESET PICTURE SETTINGS INPUT D/A POWER MODE TV POWER INPUT VCR BRIGHT Picture Mode -Preset RATIO TEXT I n t e l l i g e n t E y e Adjusts picture according to the surrounding conditions.(LCD TV models only) Dynamic Select this option to display with a sharp image. Standard The most general and natural screen display status. Mild Select this option to display with a mild image. User 1/2 Select this option to use the user-defined setting.
INPUT D/A POWER MODE TV POWER INPUT VCR BRIGHT Auto Colour Tone Control (Warm/Medium/Cool) DVD SIMPLINK RATIO TEXT INFO i GUIDE Choose one of three automatic colour adjustments. Set to warm to enhance hotter colours such as red, or set to cool to see less intense colours with more blue. MENU When selecting Picture Mode options (Dynamic, Standard and Mild), Colour Temperature is automatically change.
POWER PICTURE CONTROL MANUAL PICTURE ADJUSTMENT MENU Picture Mode -User Option SUBTITLE EXIT MARK OK You can adjust picture Contrast, Brightness,Colour, Sharpness, Tint and Back Light options to the levels you prefer. Q.VIEW VOL PR PAGE MUTE Picture Mode 1 Press the M E N U button and then use D or E button to select the PICTURE menu.
POWER MENU Colour Tone -User Option SUBTITLE EXIT MARK OK You can also adjust the detailed settings(Red, Green, Blue) by selecting the U s e r menu. This feature operate only if the picture mode set User 1 or User 2. Q.VIEW VOL PR PAGE MUTE Picture Mode 1 Press the M E N U button and then use to select the PICTURE menu. D or E button : User1 Colour Temperature : Cool XD Advanced Aspect Ratio : 16:9 Picture Reset Press the G button and then use select Colour Temperature.
PICTURE CONTROL BRIGHTNESS ADJUSTMENT INPUT D/A POWER MODE TV INPUT VCR BRIGHT DVD SIMPLINK Adjust the brightness using this button on the remote control. In Intelligent Eye mode, Brightness adjustment is not available. PICTURE CONTROL 70 1 Press the 2 Adjust the desired screen brightness. RATIO TEXT INFO i GUIDE button.
XD - PICTURE IMPROVEMENT TECHNOLOGY INPUT D/A POWER MODE TV POWER INPUT XD is LG Electronics unique picture improving technology to display a real HD source through an digital signal processing algorithm. VCR BRIGHT DVD SIMPLINK RATIO TEXT INFO i GUIDE When selecting Picture Mode options (Intelligent Eye, Dynamic, Standard and Mild), XD is automatically change to Auto.
PICTURE CONTROL ADVANCED -CINEMA INPUT D/A POWER MODE TV POWER INPUT VCR BRIGHT DVD SIMPLINK RATIO TEXT Set up the TV for the best picture appearance for viewing movies. When you operate Cinema, the TV will adjust 24 fps video from movies to 30 fps video for display (This function is only available in TV(Analog, DTV), AV1, AV2, Component 480i, 576i mode.) INFO i MENU GUIDE SUBTITLE EXIT MARK OK Q.
ADVANCED-BLACK(DARKNESS) LEVEL INPUT D/A POWER MODE TV POWER INPUT VCR BRIGHT Adjusting the contrast and the brightness of the screen using the black level of the screen. SIMPLINK DVD RATIO TEXT GUIDE This feature operates only in HDMI1, HDMI2, HDMI3 or AV1, AV2 mode. INFO i MENU SUBTITLE EXIT MARK OK Q.VIEW VOL Picture Mode PAGE : User1 Colour Temperature PICTURE CONTROL 1 Press the M E N U button and then use D or E button to select the PICTURE menu.
PICTURE CONTROL PICTURE RESET INPUT D/A POWER MODE TV POWER INPUT VCR BRIGHT DVD SIMPLINK Use to quickly reset all the Picture menu options to their original factory preset values. RATIO TEXT INFO i MENU GUIDE SUBTITLE EXIT MARK OK 1 PICTURE CONTROL 2 Press the M E N U button and then use D or E button to select the PICTURE menu. Press the G button and then use D or E button to select Picture Reset. Q.
IMAGE STICKING MINIMIZATION(ISM) METHOD (Only Plasma TV model) POWER INPUT D/A MODE TV POWER INPUT VCR BRIGHT DVD SIMPLINK A frozen still picture from a PC/video game displayed on the screen for prolonged periods will result in a fixed ghost image. Use our unique method to minimize any fixed image on the screen. RATIO TEXT GUIDE INFO i MENU SUBTITLE EXIT Press the M E N U button and then use D or E button to select the O P T I O N menu.
PICTURE CONTROL LOW POWER (Only Plasma TV model) INPUT D/A POWER MODE TV POWER INPUT VCR BRIGHT Low power reduces the plasma display power consumption. DVD SIMPLINK RATIO TEXT INFO i MENU GUIDE SUBTITLE EXIT MARK OK Q.VIEW VOL Subtitle PR : Off PICTURE CONTROL Input Label 1 Press the M E N U button and then use D or E button to select the O P T I O N menu.
FRONT DISPLAY (50/60PY3DF* only) INPUT D/A POWER MODE TV POWER INPUT VCR BRIGHT DVD SIMPLINK Illuminates brightly when the set is turned on. The LED displays current TV status. RATIO TEXT INFO i MENU GUIDE SUBTITLE EXIT MARK OK Q.VIEW VOL Subtitle PR : Off PICTURE CONTROL Input Label 1 Press the M E N U button and then use D or E button to select the O P T I O N menu.
SOUND & LANGUAGE CONTROL AUTO VOLUME LEVELER(AUTO VOLUME ) INPUT D/A POWER MODE TV POWER INPUT VCR BRIGHT AVL automatically keeps on an equal volume level even if you change programmes. SIMPLINK DVD RATIO TEXT GUIDE INFO i MENU SUBTITLE EXIT MARK OK 1 2 SOUND & LANGUAGE CONTROL 78 Press the M E N U button and then use D or E button to select the AUDIO menu. Press the G button and then use D or E button to select Auto Volume.
PRESET SOUND SETTINGS -SOUND MODE INPUT D/A POWER MODE TV POWER INPUT VCR BRIGHT Sound Mode lets you enjoy the best sound without any special adjustment because the TV sets the appropriate sound options based on the program content. DVD SIMPLINK RATIO TEXT INFO i GUIDE Standard, Music, Movie, Sports and User are preset for good sound quality at the factory and are not adjustable. MENU SUBTITLE EXIT MARK OK 1 Press the M E N U button and then use D or E button to select the AUDIO menu. Q.
SOUND & LANGUAGE CONTROL SOUND SETTING ADJUSTMENT-USER MODE INPUT D/A POWER MODE TV POWER INPUT VCR BRIGHT DVD SIMPLINK RATIO TEXT Adjust the sound to suit your taste and room situations. INFO i MENU GUIDE SUBTITLE EXIT MARK OK 1 Press the M E N U button and then use D or E button to select the AUDIO menu. 2 Press the G button and then use D or E button to select Sound Mode. Q.
Press the G button and then use make appropriate adjustments. 5 or button to * Selecting the Front Surround Press the G button and then use or button to TruSurround select O f f or S R S (Sound Retrieval System)T XT . Front Surround SRS TruSurround XT Takes advantage of any multi-channel format without needing to add extra speakers or equipment. Dialog clarity, bass enrichment, and the addition of stereo audio enhancement produces an immersive sound experience from standard stereo material.
SOUND & LANGUAGE CONTROL BALANCE INPUT D/A POWER MODE TV POWER INPUT VCR BRIGHT DVD SIMPLINK Adjust the left/right sound of speaker to suit your taste and room situations. RATIO TEXT INFO i MENU GUIDE SUBTITLE EXIT MARK OK 1 Press the M E N U button and then use D or E button to select the AUDIO menu. 2 Press the G button and then use D or E button to select Balance. SOUND & LANGUAGE CONTROL 3 Press the G button and then use make appropriate adjustments.
TV SPEAKERS ON/OFF SETUP INPUT D/A POWER MODE TV POWER INPUT VCR BRIGHT DVD SIMPLINK Turn the TV speakers off if using external audio equipment. Feature turns the TV Speakers option On or Off. RATIO TEXT INFO i MENU GUIDE SUBTITLE EXIT MARK OK 1 2 Press the M E N U button and then use D or E button to select the AUDIO menu. Press the G button and then use D or E button to select TV Speaker. Press the G button and then use D or E button to select O n or O f f.
SOUND & LANGUAGE CONTROL I/II INPUT D/A MODE TV POWER INPUT VCR STEREO/DUAL RECEPTION - In Analogue Mode only BRIGHT DVD SIMPLINK RATIO TEXT ■ INFO i GUIDE Mono sound selection If the stereo signal is weak in stereo reception, you can switch to mono by pressing the I / I I button twice. In mono reception, the clarity of sound is improved. To switch back to stereo, press the I / I I button twice again.
SUBTITLE - In Digital Mode only INPUT D/A MODE TV POWER INPUT VCR BRIGHT SIMPLINK You can select Subtitle on or off with the SUBTITLE button in DTV mode. DVD RATIO TEXT INFO i MENU GUIDE SUBTITLE EXIT MARK OK Q.VIEW VOL 1 Press the M E N U button and then use D or E button to select the OPTION menu. Subtitle PR PAGE : Off Input Label Press the G button and then use D or E button to select Subtitle.
TIME SETTING CLOCK SETTING INPUT D/A POWER MODE TV POWER INPUT VCR Auto Clock Setting BRIGHT DVD SIMPLINK RATIO TEXT INFO i GUIDE The time is set automatically from a digital channel signal. The digital channel signal includes information for the current time provided by the broadcasting station. MENU Set the clock manually if the current time is set incorrectly by the auto clock function. SUBTITLE EXIT MARK OK Q.
Manual Clock Setting INPUT D/A POWER MODE TV POWER INPUT VCR BRIGHT DVD SIMPLINK If the current time setting is wrong, reset the clock manually. RATIO TEXT INFO i MENU GUIDE SUBTITLE EXIT MARK OK Q.VIEW VOL 1 Press the M E N U button and then use D or E button to select the T I M E menu. Press the G button and then use D or E button to select Clock. 3 Press the G button and then use D or E button to select Manual.
TIME SETTING AUTO ON/OFF TIMER SETTING INPUT D/A POWER MODE TV POWER INPUT VCR BRIGHT DVD SIMPLINK The timer function operates only if the current time has been set. The Off-Time function overrides the On-Time function if they are both set to the same time. The TV must be in standby mode for the On-Time to work. If you do not press any button within 2 hours after the TV turns on with the On Time function, the TV will automatically revert to standby mode.
SLEEP TIMER SETTING INPUT D/A MODE TV POWER INPUT VCR You don’t have to remember to switch the set off before you go to sleep. The sleep timer automatically switches the set to standby after the preset time has elapsed. BRIGHT DVD SIMPLINK RATIO TEXT INFO i MENU GUIDE SUBTITLE EXIT 1 MARK Press the SLEEP button repeatedly to select the number of minutes.
TIME SETTING AUTO SHUT-OFF SETTING INPUT D/A POWER MODE TV POWER INPUT VCR BRIGHT If set to on and there is no input signal, the TV turns off automatically after 10 minutes. DVD SIMPLINK RATIO TEXT INFO i MENU GUIDE SUBTITLE EXIT MARK OK 1 2 Press the M E N U button and then use D or E button to select the T I M E menu. Press the G button and then use D or E button to select Auto Sleep. TIME SETTING 3 Press the G button and then use D or E button to select O n or O f f.
PARENTAL CONTROL / RATINGS SET PASSWORD & LOCK SYSTEM Setting up your Password INPUT D/A POWER MODE TV POWER INPUT Set up blocking schemes to block specific channels, ratings, and external viewing sources. A password is required to gain access to this menu. VCR BRIGHT DVD SIMPLINK RATIO TEXT INFO i GUIDE Press the M E N U button and then use the D or E button to select the L O C K menu. Then, press the G button. 1 MENU SUBTITLE EXIT Enter the password as requested.
PARENTAL CONTROL /RATINGS INPUT D/A POWER MODE TV POWER INPUT VCR Lock System BRIGHT SIMPLINK DVD RATIO TEXT GUIDE INFO i Enables or disables the blocking scheme you set up previously. MENU SUBTITLE EXIT MARK OK 1 After inputting the password, use the D or E button to choose Lock System. 2 Press the G button and then use the D or E to select O n or O f f . ■ Lock System : Off Set Password Block Programme Parental Guidance Input Block When you select, the Lock System is enable.
PROGRAMME BLOCKING INPUT D/A POWER MODE TV POWER INPUT VCR BRIGHT Blocks any programmes that you do not want to watch or that you do not want your children to watch. DVD SIMPLINK RATIO TEXT INFO i MENU GUIDE SUBTITLE EXIT MARK OK or E button 1 After inputting the password, use the to choose Block Programme. 2 Press the G button. You will now see a screen filled with channel numbers and a preview picture.
PARENTAL CONTROL /RATINGS PARENTAL GUIDANCE - In Digital Mode only INPUT D/A POWER MODE TV POWER INPUT VCR BRIGHT Prevents children from watching certain children's TV programs, according to the ratings limit set. DVD SIMPLINK RATIO TEXT INFO i MENU GUIDE SUBTITLE EXIT MARK OK 1 2 After inputting the password, use the to choose P a r e n t a l G u i d a n c e. D or E button Press the G button and then use the select G , P G, M , M A, A V or R .
EXTERNAL INPUT BLOCKING INPUT D/A POWER MODE TV POWER INPUT VCR BRIGHT Enables you to select a source to block from the external source devices you have hooked up. DVD SIMPLINK RATIO TEXT INFO i MENU GUIDE SUBTITLE EXIT MARK OK 1 After inputting the password, use the D or E button to choose Input Block. 2 Press the G button and then use the select a source. 3 Press the G button and then use the select O n or O f f on the each source.
TELETEXT * This feature is not available in all countries. - Teletext is a free service broadcast by some TV stations which gives up-to-the-minute information on news, weather, television programmes, share prices and many other topics. - The teletext decoder of this TV can support the SIMPLE, TOP and FASTEXT systems. SIMPLE (standard teletext) consists of a number of pages which are selected by directly entering the corresponding page number.
FASTEXT - The teletext pages are colour coded along the bottom of the screen and are selected by pressing the corresponding coloured button. A Page selection 1. Press the i button to select the index page. 2. You can select the pages which are colour coded along the bottom line with the same coloured buttons. 3. Corresponding to the SIMPLE teletext mode, you can select a page by entering its three digit page number with the NUMBER buttons in FASTEXT mode. 4.
APPENDIX TROUBLESHOOTING The operation does not work normally. Check to see if there is any object between the product and the remote control causing obstruction. Ensure you are pointing the remote control directly at the TV. ■ Ensure that the batteries are installed with correct polarity (+ to +, - to -). ■ Ensure that the correct remote operating mode is set: TV, VCR etc. ■ Install new batteries. ■ The remote control doesn’t work Is the sleep timer set? Check the power control settings.
The audio function does not work. Press the VOL or VOLUME button. ■ Sound muted? Press MUTE button. ■ Try another channel. The problem may be with the broadcast. ■ Are the audio cables installed properly? ■ Picture OK & No sound No output from one of the speakers Unusual sound from inside the product ■ Adjust Balance in menu option. ■ A change in ambient humidity or temperature may result in an unusual noise when the product is turned on or off and does not indicate a fault with the product.
APPENDIX MAINTENANCE Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you can enjoy your new TV. Caution: Be sure to turn the power off and unplug the power cord before you begin any cleaning. Cleaning the Screen 1 Here’s a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until it’s almost dry, and then use it to wipe the screen.
PRODUCT SPECIFICATIONS 3 2 L B 9 D* 32LB9D-AD Dimensions (Width x Height x Depth) Weight with stand 31.7x24.4x11.2 inches 805.8x619.7x283.9 mm without stand 31.7x21.8x3.1 inches 805.8x554.1x79.0 mm with stand without stand 32.6 pounds / 14.8kg 27.8 pounds / 12.6kg Power requirement 4 2 L B 9 D F* 42LB9DF-AD AC100-240V~ 50/60Hz 1.5A Dimensions (Width x Height x Depth) Weight with stand 40.6x30.7x13.1 inches 1030.8x779.8x333.2 mm without stand 40.6x27.3x3.5 inches 1030.8x693x88.
APPENDIX 5 0 P Y 3 D F* 50PY3DF-AA with stand 53.5x35.0x14.6 inches 1360.0x887.0x370.0 mm without stand 53.5x32.4x3.8 inches 1360.0x822.8x95.5 mm with stand without stand 126.8 pounds / 57.5kg 107.0 pounds / 48.5kg Dimensions (Width x Height x Depth) Weight Power requirement 6 0 P Y 3 D F* 60PY3DF-AA AC100-240V~ 50/60Hz 3.2A with stand 63.5x40.8x17.8 inches 1613.6x1036.8x452.0 mm without stand 63.5x38.2x3.9 inches 1613.6x970.0x98.5 mm with stand without stand 178.6 pounds / 81.0kg 143.
4 2 P B 4 D* 42PB4D-AA Dimensions (Width x Height x Depth) with stand 44.5x30.2x12.2 inches 1130x768.05x310.38 mm without stand 44.5x28.1x3.3 inches 1130x715x85 mm with stand without stand Weight AC100-240V~ 50/60Hz 3.5A Power requirement 5 0 P B 4 D* 50PB4D-AA Dimensions (Width x Height x Depth) Weight with stand 51.5x35.7x14.6 inches 1308x906.1x370 mm without stand 51.5x33.3x3.5 inches 1308x845x88.9 mm with stand without stand 88.1 pounds / 40kg 82.2 pounds / 37.
APPENDIX PROGRAMMING THE REMOTE CONTROL The remote is a multi-brand or a universal remote. It can be programmed to operate most remote-controllable devices of other manufacturers. Note that the remote may not control all models of other brands. Programming a code into a remote mode APPENDIX 104 1 To find out whether your remote control can operate each device without programming, turn on the device (such as a VCR) and press the corresponding mode button on the remote.
Remote control code VCRs Brand AIWA AKAI Codes Codes Brand MAGNAVOX 031 033 034 041 067 068 012 031 033 067 SAMSUNG MARANTZ 069 101 027 031 003 033 101 045 013 013 049 151 034 024 012 048 043 053 066 133 043 046 124 146 033 023 037 031 103 039 043 129 033 MARTA MATSUI MEI MEMOREX 040 033 007 108 116 135 041 010 064 110 111 117 119 MGA MINOLTA MITSUBISHI 023 039 043 053 017 031 037 131 008 025 034 046 138 009 033 109 136 012 018 063 033 033 013 066 063 072 144 147 031 050 150 034 048 012 1
APPENDIX VCRs Brand Codes ABC 003 046 AJIN 112 ANTRONIK 014 ARCHER 005 CABLE STAR 026 CENTURION 092 CENTURY 007 CITIZEN 007 COLOUR VOICE 065 COMBANO 080 COMTRONICS 019 DIAMOND 023 EAGLE 020 EASTERN 057 ELECTRICORD 032 GE 072 GEMINI 008 GI 052 GOLDEN CHANNEL 030 HAMLIN 049 HITACHI 052 HOSPITALITY 070 JERROLD 002 009 APPENDIX 106 004 039 042 052 053 007 014 024 Brand LG (GOLDSTAR) M-NET MACOM MAGNAVOX MEMOREX MOVIE TIME NSC 090 081 030 OAK PANASONIC PARAGON 030 040 062 066 PHILIPS 022 025 054 07
IR CODES 1. How to Connect ■ Connect your wired remote control to the Remote Control port on the TV. 2. Remote Control IR Codes ■ Output waveform Single pulse, modulated with 37.917KHz signal at 455KHz Carrier frequency Tc FCAR = 1/TC = fOSC/12 Duty ratio = T1/TC = 1/3 T1 ■ Configuration of frame 1st frame Lead code Low custom code High custom code Data code C0 C1 C2 C3 C4 C5 C6 C7 Data code D0 D1 D2 D3 D4 D5 D6 D7 Repeat frame Repeat code ■ Tf Lead code 9 ms 4.5 ms ■ Repeat code 0.
APPENDIX APPENDIX 108 (Hexa) Code Function Note Code 50 D/A INPUT Remote control Button 64 SIZE Remote control Button 0B INPUT Remote control Button 70 INDEX Remote control Button 79 RATIO Remote control Button 26 TIME Remote control Button 0E SLEEP Remote control Button 2A REVEAL Remote control Button 10-19 Number Key 0-9 Remote control Button 20 TEXT Remote control Button 1A Q.
EXTERNAL CONTROL THROUGH RS-232C Connect the RS-232C (serial port) input jack to an external control device (such as a computer or an A/V control system) to control the product’s functions externally. Connect the serial port of the control device to the RS-232C jack on the product back panel. Note: RS-232C connection cables are not supplied with the product.
APPENDIX RS-232C Configurations 7-Wire Configurations (Standard RS-232C cable) RXD TXD GND DTR DSR RTS CTS PC PDP 2 3 5 4 6 7 8 3 2 5 6 4 8 7 D-Sub 9 D-Sub 9 TXD RXD GND DSR DTR CTS RTS 3-Wire Configurations(Not standard) RXD TXD GND DTR DSR RTS CTS PC PDP 2 3 5 4 6 7 8 3 2 5 6 4 7 8 D-Sub 9 D-Sub 9 TXD RXD GND DTR DSR RTS CTS Set ID Use this function to specify a TV ID number. Refer to ‘Real Data Mapping 1’. p .
Command Reference List COMMAND1 COMMAND2 DATA (Hexadecimal) COMMAND1 COMMAND2 DATA (Hexadecimal) 01. Power k a 0~1 16. Bass k s 0 ~ 64 02. Input Select k b 0~8 17. Balance k t 0 ~ 64 03. Aspect Ratio k c See p.112 18. Colour Temperature k u 0~3 04. Screen Mute k d 0~1 19. Red Adjustment k v 0 ~ C8 05. Volume Mute k e 0~1 20. Green Adjustment k w 0 ~ C8 06. Volume Control k f 0 ~ 64 21. Blue Adjustment k $ 0 ~ C8 07. Contrast k g 0 ~ 64 22.
APPENDIX 0 1 . Power (Command2:a) 05. Volume Mute (Command2:e) To control Power On/Off of the TV. To control volume mute on/off. Transmission [k][a][ ][Set ID][ ][Data][Cr] You can also adjust mute using the MUTE button on remote control. Data 0 : Power Off Data 1 : Power On Acknowledgement [a][ ][Set ID][ ][OK/NG][Data][x] * In a like manner, if other functions transmit ‘FF’ data based on this format, Acknowledgement data feedback presents status about each function.
09. Colour (Command2:i) 1 5 Treble (Command2:r) To adjust the screen colour. To adjust treble. You can also adjust colour in the Picture menu. You can also adjust treble in the Audio menu. Transmission [k][i][ ][Set ID][ ][Data][Cr] Transmission [k][r][ ][Set ID][ ][Data][Cr] Data Min : 0 ~ Max : 64 Data Min: 0 ~ Max: 64(*transmit by Hexadecimal code) *Refer to ‘Real data mapping 1’. See page 112. *Refer to ‘Real data mapping 1’. See page 112.
APPENDIX 20. G r e e n A d j u s t m e n t ( C o m m a n d : w ) To adjust green in colour temperature. Transmission [k][w][ ][Set ID][][Data][Cr] Data Min:0 ~ Max:C8 *Refer to "Real data mapping 2" as shown below Acknowledgement [w][ ][Set ID][ ][OK/NG][Data][x] 23. ISM Method (Command2:p) To control the ISM method. You can also adjust ISM method in OPTION menu. This feature is not available for all models.
OPEN SOURCE LICENSE GNU GENERAL PUBLIC LICENSE Version 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. Preamble The licenses for most software are designed to take away your freedom to share and change it.
APPENDIX 1. You may copy and distribute verbatim copies of the Program's source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and give any other recipients of the Program a copy of this License along with the Program.
If distribution of executable or object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place counts as distribution of the source code, even though third parties are not compelled to copy the source along with the object code. 4. You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this License.
APPENDIX NO WARRANTY 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.
GNU LESSER GENERAL PUBLIC LICENSE Version 2.1, February 1999 Copyright (C) 1991, 1999 Free Software Foundation, Inc. 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. [This is the first released version of the Lesser GPL. It also counts as the successor of the GNU Library Public License, version 2, hence the version number 2.1.
APPENDIX Although the Lesser General Public License is Less protective of the users' freedom, it does ensure that the user of a program that is linked with the Library has the freedom and the wherewithal to run that program using a modified version of the Library. The precise terms and conditions for copying, distribution and modification follow. Pay close attention to the difference between a "work based on the library" and a "work that uses the library".
Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the Library. In addition, mere aggregation of another work not based on the Library with the Library (or with a work based on the Library) on a volume of a storage or distribution medium does not bring the other work under the scope of this License. 3.
APPENDIX c) Accompany the work with a written offer, valid for at least three years, to give the same user the materials specified in Subsection 6a, above, for a charge no more than the cost of performing this distribution. d) If distribution of the work is made by offering access to copy from a designated place, offer equivalent access to copy the above specified materials from the same place.
13. The Free Software Foundation may publish revised and/or new versions of the Lesser General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number.
APPENDIX MOZILLA PUBLIC LICENSE Version 1.1 --------------1. Definitions. 1.0.1. "Commercial Use" means distribution or otherwise making the Covered Code available to a third party. 1.1. "Contributor" means each entity that creates or contributes to the creation of Modifications. 1.2. "Contributor Version" means the combination of the Original Code, prior Modifications used by a Contributor, and the Modifications made by that particular Contributor. 1.3.
(b) under Patents Claims infringed by the making, using or selling of Original Code, to make, have made, use, practice, sell, and offer for sale, and/or otherwise dispose of the Original Code (or portions thereof). (c) the licenses granted in this Section 2.1(a) and (b) are effective on the date Initial Developer first distributes Original Code under the terms of this License. (d) Notwithstanding Section 2.
APPENDIX (b) Contributor APIs. If Contributor's Modifications include an application programming interface and Contributor has knowledge of patent licenses which are reasonably necessary to implement that API, Contributor must also include this information in the LEGAL file. (c) Representations. Contributor represents that, except as disclosed pursuant to Section 3.
6.3. Derivative Works.
APPENDIX 10. U.S. GOVERNMENT END USERS. The Covered Code is a "commercial item," as that term is defined in 48 C.F.R. 2.101 (Oct. 1995), consisting of "commercial computer software" and "commercial computer software documentation," as such terms are used in 48 C.F.R. 12.212 (Sept. 1995). Consistent with 48 C.F.R. 12.212 and 48 C.F.R. 227.7202-1 through 227.7202-4 (June 1995), all U.S. Government End Users acquire Covered Code with only those rights set forth herein. 11. MISCELLANEOUS.
