Colour Television OWNER’S MANUAL Please read this manual carefully before operating your set. Retain it for future reference. Record model number and serial number of the set. See the label attached on the back cover and quote this information to your dealer when you require service.
Contents Installation..........................................................2 Connection of external equipment..................2 Location and function of controls...................2 Basic operation.................................................4 Other functions.................................................4 On screen menus..............................................5 Setting up TV stations.......................................5 Picture adjustment.............................................
Location and function of controls All the functions can be controlled with the remote control handset. Some functions can also be adjusted with the buttons on the front panel of the set. Remote control handset Before you use the remote control handset, please install the batteries. See the next page. 1. POWER switches the set on from standby or off to standby. 2. NUMBER BUTTONS switches the set on from standby or directly select a number. 3. MENU selects a menu. 4.
Basic operation Q.VIEW (or YELLOW) Press the Q.View (or YELLOW) button to view the last programme you were watching. On and off 1. Press the main power button to switch the set on. 2. If the set is in standby mode, press the POWER, D / E, TV/AV or NUMBER buttons on the remote control handset to switch it on fully. 3. Press the POWER button on the remote control handset. The set reverts to standby mode. 4. Press the main power button again to switch the set off.
Setting up TV stations On screen menus The dialogue between you and your set takes place on screen with an operator menu. The buttons required for the operating steps are also displayed. Auto programme tuning All stations that can be received are stored by this method. It is recommended that you use auto programme during installation of this set. System : BG :(Asia/NewZealand/ M.
Time Setting Picture adjustment Note: Picture menu options are not available for the RGB input source. Setting the On/Off timer By using this function, the set automatically switches on or off at a preset time. You must set the time correctly before using the on/off time function. Note : a. On time works only in standby mode. b. To view the remaining on/off time, select the Time menu. c. When you switch the main power off, the Clock is reset .
Teletext (option) Direct page selection Corresponding to the SIMPLE teletext mode, you can select a page by entering it as a three digit number using the NUMBER buttons in TOP mode. Teletext (or TOP text) is an optional function, therefore only a set with the teletext system can receive the teletext broadcast. Teletext is a free service broadcast by most TV stations which gives up-to-the-minute information on news, weather, television programmes, share prices and many other topics.
Troubleshooting check list Symptoms No picture, no sound Sound OK, poor picture Picture OK, poor sound Picture blurred Lines or streaks in picture Poor reception on some channels No colour Poor colour Remote control does not work Check these items and try to adjust these The mains plug-(plugged in and switched on) Is the TV switched on Try another channel (weak signal) Check aerial (plugged into TV?) Check aerial (broken lead?) Check aerial Check for local interference Adjust contrast Adjust brightness Adj