English Español LG Electronics BLUETOOTH® Headset HBM-290 User Manual Rev 1.0 US All rights reserved. LG Electronics Inc., 2013 Note: For the best performance and to prevent any damage to, or misuse of the HBM-290, please read all of the information carefully before to use. WARNING : This product contains chemicals known to the State of California to cause cancer and birth defects or reproductive harm. Wash hands after handling.
Table of Contents Introduction ENG - Included in Package Description of parts How to use - Change direction - Charging - Low battery - Battery status alert - Power on - Power off - Pairing - Auto-reconnect - Volume control - Calling • Answering a call • Making a call • Voice dialing • Last number redial • Ending a call • Transferring a call • Call waiting • Call reject • Mic mute - Advanced multipoint - Audio streaming (A2DP) - HD speaker - SMS reader 3 3 4 4 4 5 5 5 5 5 6 7 7
ENG Introduction The LG HBM-290 is a light weight wireless headset that uses Bluetooth® technology. This product can be used as an audio accessory for devices that support the headset, hands-free or A2DP Bluetooth® profiles.
Description of parts Front ENG Call Button Speaker Microphone Back Power Button LED indicator Volume Up/Down Button Charging Port How to use Change direction Left 4 Right
How to use - When the charger is connected, with power on or off, the headset will turn off. - While charging, the LED indicator will show a solid red light. - The buttons will not function while the device is charging. - It takes 2 hours to fully charge the headset. - When charging is complete, the LED indicator will turn off. ENG Charging Low battery - An announcement will play once every 2 minutes. - If the battery is not charged, the headset will turn off.
How to use Pairing ENG - Before using the headset for the first time, it must be paired with a Bluetooth enabled device. - There are 2 pairing modes with the HBM-290. 1) Easy Pairing a) Move the Power Switch to the “ON” position. b) The headset will enter auto-reconnect mode for 10 seconds. (If your headset has already been paired with a device, the headset will automatically reconnect to the device when the HBM-290 is powered on.) c) After 10 seconds, the HBM-290 will automatically enter pairing mode.
How to use - If the HBM-290 is turned off (either accidentally or intentionally) while connected, the headset will disconnect from the device. The headset and handset will automatically reconnect when the HBM-290 is turned back on (provided that both devices are within the required range of 33 feet (10 meters).
How to use ENG Voice dialing - Briefly press the CALL button to activate “Voice dialing”. For best results, record the voice dialing tag through your headset. NOTE: I f your handset does not support voice dialing, this action may activate Last Number Redial. Last number redial - Press and hold the CALL button for 1 second to activate “Last number redial”. The headset will beep and then call the last number dialed. * Feature will not work if held for longer than 1 second.
How to use The HBM-290 is capable of having two devices connected to the headset at the same time. This will give you the freedom of using call waiting between calls on both of your connected phones. ENG Advanced multipoint Connection - Pair the headset with one of your Bluetooth-enabled handsets. (per the pairing instructions on page 6). - Turn off the headset. - With the power off, press and hold the POWER button on the HBM-290 for 6 seconds to enter Manual Pairing mode.
How to use Audio streaming (A2DP) ENG The HBM-290 supports music streaming (A2DP). When you play music from your A2DP enabled device, it will automatically transfer to your headset. Music will automatically pause when you have an incoming call. When the call is ended the music will start playing again. A2DP allows streaming of all audio from your handset and running applications including music and GPS navigation. HD speaker The HBM-290 supports high definition voice calling and audio streaming.
Summary of button functions HBM-290 Status Action Power on Power off Press the POWER button for 3 seconds. Power off Power on Press the POWER button for 3 seconds. Volume up Talking Briefly press the VOLUME UP button. Volume down Talking Briefly press the VOLUME DOWN button. Transferring a call Talking - Handset to headset Briefly press the CALL button. (must be paired) - Headset to handset Press and hold the VOLUME UP button for 3 seconds.
LED indication Function ENG HBM-290 Status Power on Action The LED will flash 4 times. Power off The LED will flash 4 times and then turns off. Pairing mode The LED stays on. Headset / Hands-Free / Operating A2DP profiles connected The LED will flash twice every 5 seconds. Call connected The LED will flash twice every 5 seconds. For the first 15 minutes after the devices are Out of range disconnected the LED will flash twice every 5 seconds. After that it will flash once every 5 seconds.
Specification Description Bluetooth® specification V3.0 (Headset / Hands-Free / A2DP Profiles) Battery 3.7V, Li- Polymer, 110mAh Talk Time Up to 10 Hrs Stand by time Up to 500 Hrs Charging time < 2 hours Operation temperature -10°C ~ 60°C Dimension / weight 17mm(W) X 53.7mm(L) X 9.5mm(H) / 9.2g ENG Item Precautions Do not drop the device. Do not modify, repair, or disassemble. Do not expose directly to water, alcohol, benzene, etc. for cleaning. Do not expose directly to flammables.
Declaration of Confirmation ENG FCC NOTICE TO USERS: This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference and (2) This device must accept any interference received, including interference that may cause undesired operation. IMPORTANT NOTE: To comply with the FCC RF exposure compliance requirements, no change to the antenna or the device is permitted.
ENG Additional Information 2. Potentially explosive atmosphere Turn off your electronic device when in any area with a potentially explosive atmosphere. Although this is uncommon, your electronic device could generate sparks. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death. Areas with a potentially explosive atmosphere are often, but not always, clearly marked. 3.
Additional Information ENG 16 6. Conditions - The warranty is valid only if the original receipt issued to the original purchaser by the dealer, specifying the date of purchase and serial number, is presented with the product to be repaired or replaced. LG Electronics reserves the right to refuse warranty service if this information has been removed or changed after the original purchase of the product from the dealer.
ENG Limited warranty Subject to the conditions of this Limited Warranty, LG Electronics warrants this product to be free from defects in design, material and workmanship at the time of its original purchase by a consumer, and for a subsequent period of one (1) year. Should your product need warranty service, please return it to the dealer from whom it was purchased or contact your local LG Electronics contact centre to get further information.
MEMO
