FCC ID : BEJC19JD APPENDIX F : USER’S MANUAL
User’s Guide 910E 910S Make sure to read the Important Precautions before using the product. Keep the User's Guide(CD) in an accessible place for furture reference. See the label attached on the back cover and quote this information to your dealer when you require service.
Regulatory Information FCC Compliance Statement CE Conformity Notice (for Europe) This equipment has been tested and found to comply within the limits of a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Regulatory Information cont. scheme, which provides for international environmental labelling of personal computers. The labelling scheme was developed as a joint effort by the TCO (The Swedish Confederation of Professional Employees), Naturckyddsföreningen (The Swedish Society for Nature Conservation), and NUTEK (The National Board for Industrial and Technical Development in Sweden), and SEMKO AB (an international certification agency).
Regulatory Information cont. TCO99 The energy requirements include a demand that the computer and/or display, after a certain period of inactivity, shall reduce its power consumption to a lower level in one or more stages. The length of time to reactivate the computer shall be reasonable for the user. Congratulations! You have just purchased a TCO’99 approved and labelled product! Your choice has provided you with a product developed for professional use.
Regulatory Information cont. Mercury** Mercury is sometimes found in batteries, relays and switches. It damages the nervous system and is toxic in high doses. The relevant TCO’99 requirement states that batteries may not contain any mercury. It also demands that mercury is not present in any of the electrical or electronics components associated with the labelled unit.
Important Precautions This unit has been engineered and manufactured to ensure your personal safety, however improper use may result in potential eletrical shock or fire hazards. In order to allow the proper operation of all safeguards incorporated in this monitor, observe the following basic rules for its installation, use, and servicing. Keep it in an accessible place for future reference. On Safety Use only the power cord supplied with the unit.
Important Precautions To Prevent Fire or Hazards: Always turn the monitor OFF if you leave the room for more than a short period of time. Never leave the monitor ON when leaving the house. Keep children from dropping or pushing objects into the monitor's cabinet openings. Some internal parts carry hazardous voltages. Do not add accessories that have not been designed for this monitor.
Connecting the Monitor Before setting up the monitor, ensure that the power is turned off to the monitor, computer system, and other attached devices. Carefully set the monitor face-down with the underside facing you. Connecting the Tilt/Swivel stand 1. Align the hooks on the tilt/swivel stand with the matching slots in the base of the monitor. 2. Insert the hooks into slots. 3. Slide the tilt/swivel stand toward the front of the monitor until the latches click into the locked position.
Connecting the Monitor Using the Computer 1. Connect the signal cable. When mated, tighten the thumbscrews to secure the connection. 2. Connect the power cord into a properly power outlet that is easily accessible and close to the monitor. NOTE This is a simplified representation of the rear view. This rear view represents a general model; your monitor may differ from the view as shown. Signal Cable Power Cord Attached Type* * Detached Type* * Varies according to model.
Control Panel Functions Front Panel Controls Control Function Power Button Use this button to turn the monitor on or off. Power (DPMS) Indicator This Indicator lights up green when the monitor operates normally. If the monitor is in DPM (Energy Saving) mode, this indicator color changes to amber. MENU (or OSD) Button Use this button to enter or exit the on screen display. Buttons Use these buttons to choose or adjust items in the on screen display.
On Screen Display (OSD) Control Adjustment Screen Adjustment Making adjustments to the image size, position and operating parameters of the monitor is quick and easy with the On Screen Display Control system. A short example is quick and easy given below to familiarize you with the use of the controls. The following section is an outline of the available adjustments and selections you can make using the OSD. NOTE Allow the monitor to stabilize for at least 30 minutes before making image adjustments.
On Screen Display(OSD) Selection and Adjustment The following table indicates all the On Screen Display control, adjustment, and setting menus.
On Screen Display(OSD) Selection and Adjustment You were introduced to the procedure of selecting and adjusting an item using the OSD system. Listed below are the icons, icon names, and icon descriptions of the all items shown on the Menu. NOTE The order of icons may differ depending on the model (A9~A12). To adjust the brightness and contrast of the screen OSD Adjust Description Brightness To adjust the brightness of the screen. Contrast To adjust the contrast of the screen.
On Screen Display(OSD) Selection and Adjustment To adjust the size of the screen OSD Adjust Description Vertical Size To adjust image height. Horizontal Size To adjust image width. To adjust the shape of the screen OSD Adjust Description Tilt To correct image rotation. Side Pincushion To correct a concave or convex bowing of the image. Side Pincushion Balance To correct the balance of both sides bowing. Parallelogram To correctly adjust the skew of the image. Trapezoid To correct geometric distortion.
On Screen Display(OSD) Selection and Adjustment To customize the color of the screen OSD Adjust Description PRESET 6500K/ 9300K Select the screen color. • 6500K: Slightly reddish white. • 9300K: Slightly bluish white. TEMP RED GREEN BLUE Select the screen temperature which you prefer among reddish or bluish or any color in between. Set your own color levels.
On Screen Display(OSD) Selection and Adjustment To improve the clarity and stability of the screen OSD Adjust Description DEGAUSS To manually demagnetize the screen to avoid showing incorrect images or colors. RECALL You can use this function to reload the modified parameters for screen display operation, as specified by the user after purchase: Position, Size, Side Pincushion, Trapezoid (These recalled options may differ depending on the mode selected: Preset, User, or New).
Troubleshooting Check the following before calling for service. No image appears Is the power cord of the monitor connected? • Check and see if the power cord is connected properly to the power outlet. Is the power indicator light on? • Press the Power button. Is the power on and the power indicator green? • Adjust the brightness and the contrast. Is the power indicator amber? • If the monitor is in power saving mode, try moving the mouse or pressing any key on the keyboard to bring up the screen.
Troubleshooting The screen color is not normal. Do you see basic • Set the color depth to 256 colors or higher: use 'Control discoloration (16 colors)? Panel' 'Display' 'Settings' 'Color Palette' Is the screen color unstable • Check the connection of the signal cable. Or pull out the or monochrome? video card of the PC and insert it again. Do you see black dots on • This is due to a small amount of foreign or abnormally the screen? florescent material that became fastened on the mask during manufacturing.
Specifications Picture Tube Sync Input Video Input Resolution Plug&Play Power Consumption Dimensions &Weight (with tilt/ swivel stand) Power Input 19 inches (18.0 inches viewable) 90 degree deflection-29.1mm 0.26mm(Ph) ARAS(Anti-Reflective Anti-Static) coating Horizontal Freq. 30 - 85kHz (Automatic) Vertical Freq. 50 - 160Hz (Automatic) Input Form Separate TTL, Positive/Negative Signal Input 15 pin D-Sub Connector Separate, RGB Analog, 0.
Specifications Preset Modes (Resolution) Display Modes (Resolution) 1 2 3 4 VESA VESA VESA VESA Horizontal Freq. (kHz) 37.50 53.674 68.677 79.976 640 x 480 800 x 600 1024 x 768 1280 x 1024 A15 Vertical Freq.
Digitally yours
